RE: messages with udh
Andreas Fink <[email protected]>
| Newsgroups | gmane.comp.mobile.kannel.devel |
|---|---|
| Message-ID | <p05101405b8b60a0ee268@[193.53.0.55]> |
>I've also got this informaton from the SMSC operators, about using coding = >2 and why they send NACK >I don't know what they mean, but I hope someone do, and can fix this problem >in the kannel >or can tell me if there is something I can do in the configuration. > >They Wrote : > >Hi Avner, > >Probable the Xser (Extra Services) field will cause the NACK, the value's in >that field 020104 refer to DSC information, >, 01 is the lenght in octets of the next octet's 04. 04 in bin. is 0000100 >the meaning is described in ETSI specs GSM 03.38 >the bit's 01 means an alphabet is used as 8-bit data. This means 8 bit data which is absolutely correct. You might ask them why they have a problem with 8 bit data. the two SMSC's we use which are EMI/UCP too dont have that kind of problem so they might need a software upgrade to fix this on their side. -- Andreas Fink Fink-Consulting ------------------------------------------------------------------ Tel: +41-61-6932730 Fax: +41-61-6932729 Mobile: +41-79-2457333 Address: A. Fink, Schwarzwaldallee 16, 4058 Basel, Switzerland E-Mail: [email protected] Homepage: http://www.finkconsulting.com ------------------------------------------------------------------ Something urgent? Try http://www.smsrelay.com/ Nickname afink