Re: Broken Ericsson T68

Re: Broken Ericsson T68Ok, some quotes:

27005 page 35

<length>                integer type value indicating in the text mode (+CMGF=1) the length of the message body <data> > (or <cdata>) in characters; or in PDU mode (+CMGF=0), the length of the actual TP data unit in octets (i.e. the RP layer SMSC address octets are not counted in the length)


page 44
+CMT: [<alpha>],<length><CR><LF><pdu> (PDU mode enabled); or

  ----- Original Message ----- 
  From: Andreas Fink 
  To: Bruno David Rodrigues 
  Sent: Friday, March 15, 2002 6:04 PM
  Subject: Re: Broken Ericsson T68


    I've discovered that Ericsson T68 is REALLY broken!

    When receiving SMS's, there's at least two bugs.

    First non-bug is that the init string have to be
    AT+CNMI=3,3

    Because that's almost the only parameteres accepted:
    AT+CNMI=?
    +CNMI: (3),(0,1,3),(0,2),(0),(0)

    but that's ok, because it delivers the message to kannel anyway.

    But then when I receive a message:

    +CMT: 31

    Without the colon!!! Broken.

    But it gets worst:

    Ericsson counts the wole string, with SMSC included!

    079153911116161604098519494002F739002030515191730005F4F29C5E06

    I have 07 bytes for SMSC and 23 bytes for PDU, I should receive

    +CMT: ,23



  as far as I know including the SMSC or not is not false, its part of the pdu so indicating 31 doesnt sound too wrong to me.


-- 


  Andreas Fink
  Fink-Consulting

  ------------------------------------------------------------------
  Tel: +41-61-6932730 Fax: +41-61-6932729  Mobile: +41-79-2457333
  Address: A. Fink, Schwarzwaldallee 16, 4058 Basel, Switzerland
  E-Mail:  [email protected]  Homepage: http://www.finkconsulting.com
  ------------------------------------------------------------------
  Something urgent? Try http://www.smsrelay.com/  Nickname afink