AW: Problems sending OTA conf. Nokia

"Bjoern Buettner" <[email protected]>
Newsgroups gmane.comp.mobile.kannel.devel
Message-ID <[email protected]>
Thanx,

 but I've some problems using XML4OTA

This is my understanding of the Kannel Doc.
http://mysmsgw:13013/cgi-bin/sendota?username=ota&password=ota1&phonenumber=
1234567&text=/usr/local/kannel-20020228/test.xml&type=settings

Is this correct??

I got following debug mesg.

2002-03-19 10:51:07 [2] DEBUG: HTTP: Creating HTTPClient for
`195.233.129.207'.
2002-03-19 10:51:07 [3] INFO: smsbox: Got HTTP request </cgi-bin/sendota>
from <195.233.129.207>
2002-03-19 10:51:07 [3] INFO: sendsms used by <ota1>
2002-03-19 10:51:07 [3] ERROR: OTA: No document to parse. Probably an error
in OTA source
2002-03-19 10:51:07 [3] DEBUG: Status: 400 Answer: <Erroneous ota source,
cannot compile
>
2002-03-19 10:51:07 [3] DEBUG: HTTP: Resetting HTTPClient for
`195.233.129.207'.
2002-03-19 10:51:07 [1] DEBUG: HTTP: Destroying HTTPClient area 0x40415d88.
2002-03-19 10:51:07 [1] DEBUG: HTTP: Destroying HTTPClient for
`195.233.129.207'.

my test xml document looks like this:

<?xml version="1.0"?>
<!DOCTYPE CHARACTERISTIC-LIST SYSTEM "file://bla/settings.dtd">
<CHARACTERISTIC-LIST>

<CHARACTERISTIC TYPE="ADDRESS">
<PARM NAME="BEARER" VALUE="GSM/CSD"/>
<PARM NAME="PROXY" VALUE="213.161.40.40"/>
<PARM NAME="PORT" VALUE="9201"/>
<PARM NAME="CSD_DIALSTRING" VALUE="+358600505050"/>
<PARM NAME="PPP_AUTHTYPE" VALUE="PAP"/>
<PARM NAME="PPP_AUTHNAME" VALUE="yourusername"/>
<PARM NAME="PPP_AUTHSECRET" VALUE="yourauthsecret"/>
<PARM NAME="CSD_CALLTYPE" VALUE="ISDN"/>
<PARM NAME="CSD_CALLSPEED" VALUE="9600"/>
</CHARACTERISTIC>

<CHARACTERISTIC TYPE="URL"
     VALUE="http://cn.wiral.com/wapwml/loginphtml"/>

<CHARACTERISTIC TYPE="NAME">
<PARM NAME="NAME" VALUE="Matrix Login CSD"/>
</CHARACTERISTIC>

</CHARACTERISTIC-LIST>

The directory /usr/local/kannel-20020228/"bla" contains the example
"settings.dtd"

What's wrong, my undertanding of the doc. or my config ? :-)

Bjoern

kind regards

Vodafone TeleCommerce GmbH
Architecture & Engineering
Bjoern Buettner
Daniel Goldbach Str. 17-19
40880 Ratingen

Tel. +49 (0) 21 02 / 97 20 13
Fax +49 (0) 21 02 / 97 15 14

mailto:[email protected]
www.vodafone.com
www.vodafone-is.de


> -----Ursprüngliche Nachricht-----
> Von: [email protected]
> [mailto:[email protected]]Im Auftrag von Aarno Syvänen
> Gesendet: Freitag, 15. März 2002 11:57
> An: [email protected]
> Cc: [email protected]
> Betreff: Re: Problems sending OTA conf. Nokia
>
>
>
>
> > ----------
> > Von: 	Aarno Syv=E4nen[SMTP:[email protected]]
> > Gesendet: 	Freitag, 15. M=E4rz 2002 11:57:09
> > An: 	[email protected]
> > Cc: 	[email protected]
> > Betreff: 	Re: Problems sending OTA conf. Nokia
> > Diese Nachricht wurde automatisch von einer Regel weitergeleitet.
> >=20
> Bjoern Buettner wrote:
> >=20
> > Hi folks,
> >=20
> > Today I've re-configured my OTA settings in Kannel CVS Version from
> > 2002/02/28.
> > I've used the standard example in Kannel. (kannel config: ota-setting)
> >=20
> > It's strange, but Nokia phones does not receive anything, yet!?
> > Siemens receives a SMS but it is not usable! For me, it's clear why!
> >=20
> > So I've tried to configure the XML version of OTA, descripted
> in Kannel D=
> oc.
> > I'm so sorry, but I do not understand, the examples :-)
> >=20
> > ex. from the Doc.
> > http://smsbox.host.name:13013/cgi-bin/sendota?
> >
> username=3Dfoo&password=3Dbar&phonenumber=3D0123456&text=3DmyXMLdocument&
> > type=3Dsettings
> >=20
> > I do not understand the last two parts!
> > ...."text=3DmyXMLdocument&type=3Dsettings"
> >=20
> > "text=3DmyXMLdocument" --> What does it mean. Do you mean the
> FQ PATH of =
> the
> > xml document
> > ex. "text=3D"/tmp/bla.xml" or what?!? :-))) Where should the XML file be
> > stored ?
>
> I mean the path. I make the the required correction.
>
> >=20
> > next misunderstood: "setting types".
> >=20
> > "types=3Dsettings" Ups?????
>
> Settings means "OTA configuration document". Another term used here is
> "client provisioning".
>
> > In the doc I found this.    \/
> > + Document type definition (DTD) for these documents is not
> > + publicly available, you must supply it as a file.
> > + Kannel gw directory contains an example, settings.dtd.
> > ACK! I understand.
> >=20
> > But, how is the XML version to use really?!
>
> Example XML documents contain this info (1.0). But yes, the text itself
> must contain it, too.
>
> >=20
> > I've read this part in the Doc. 5 times or more, but I' didn't
> understand
> > this part. (I'm ashamed on myself) :-)
> >=20
> > Can you guy's explain it a little bit more "for Dummy users" :-)))
> > Or do you have a more explained ex.?
> >=20
> > No offence guys !
>
> It is only good that you ask questions. I will add answers to the
> userguide.
>
> Aarno
>
>
>
> ---------------------------------------------------------
> This Mail has been checked for Viruses
> Attention: Encrypted mails can NOT be checked!
>
> **
>
> Diese Mail wurde auf Viren geprueft
> Hinweis: Verschluesselte mails koennen NICHT auf Viren geprueft werden!
> ---------------------------------------------------------
>
>
> ---------------------------------------------------------
> This Mail has been checked for Viruses
> Attention: Encrypted mails can NOT be checked!
>
> **
>
> Diese Mail wurde auf Viren geprueft
> Hinweis: Verschluesselte mails koennen NICHT auf Viren geprueft werden!
> ---------------------------------------------------------
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.