Rif: RE: speed (smsc_at2.c)

> I think that at2 should autodetect speed if it doesn't find any speed
> setting, in the smsc group or modems.conf, or if the smsc speed setting
> is set to 0 regardless of the modems.conf setting, or the modems.conf
> setting is set to 0 - isn't that the case now ?

No. Now you must set speed=0 if you want speed to be autodetected, otherwise it behaves as you 
set speed = 9600. 
That's why I think if no speed is specified than it should be autodetect.
Andrea