Re: Rif: RE: speed (smsc_at2.c)

+1 for me :-)
Andrea
----- Original Message -----
From: "Bruno David Rodrigues" <[email protected]>
To: "Stipe Tolj" <[email protected]>; <[email protected]>
Cc: "Oded Arbel" <[email protected]>; <[email protected]>
Sent: Wednesday, March 27, 2002 4:20 PM
Subject: Re: Rif: RE: speed (smsc_at2.c)


> But that's why there is a "speed" in modems.conf. That's why Siemens M20
> have a 19200, because *every* works at 19200 and not at 9600.
>
> But the problem is that *every*. There's equal modems at one speed and
> others
> at other speed (wavecom).
>
> That's why there is a speed in smsc group, to force a speed different from
> the
> speed defined in modems.conf.
>
> I'm commiting a patch to change this behaviour.
>
> If smsc->speed is defined, use it.
> Else try to use modem->speed (if defined, of course).
> If this one fails, try to autodetect
>
> Is it ok ?
>
>
> ----- Original Message -----
> From: "Stipe Tolj" <[email protected]>
> To: <[email protected]>
> Cc: "Oded Arbel" <[email protected]>; <[email protected]>
> Sent: Wednesday, March 27, 2002 10:18 AM
> Subject: Re: Rif: RE: speed (smsc_at2.c)
>
>
> > [email protected] wrote:
> > >
> > > > I think that at2 should autodetect speed if it doesn't find any
speed
> > > > setting, in the smsc group or modems.conf, or if the smsc speed
> setting
> > > > is set to 0 regardless of the modems.conf setting, or the
modems.conf
> > > > setting is set to 0 - isn't that the case now ?
> > >
> > > No. Now you must set speed=0 if you want speed to be autodetected,
> otherwise it behaves as you
> > > set speed = 9600.
> > > That's why I think if no speed is specified than it should be
> autodetect.
> >
> > +1 from me. If no 'speed' directive is specified in the group,
> > autodetect should be used, because you don't have a garantee that a
> > 9600 speeded device is attached to the port.
> >
> > Stipe
> >
> > [email protected]
> > -------------------------------------------------------------------
> > Wapme Systems AG
> >
> > Münsterstr. 248
> > 40470 Düsseldorf
> >
> > Tel: +49-211-74845-0
> > Fax: +49-211-74845-299
> >
> > E-Mail: [email protected]
> > Internet: http://www.wapme-systems.de
> > -------------------------------------------------------------------
> > wapme.net - wherever you are
> >
> >
>
>