RE: How to shutdown & restart Gateway development release 1.1.6

Hi!
I was making a .spec for Redhat 7.2 and also made a init script. The
script was made using Redhat 7.2 functions and aware of a
/etc/sysconfig/kannel conf file and chkconfg.

 In the spec file a also made 5 diferent RPMs kannel , kannel-mysql ,
kannel-manual and kannel-contrib for i386 and kannel-src with the
libxml2 patch and the init script. I made diffrent packages because of
the size.

683585		kannel-1.1.6-1.i386.rpm
22936		kannel-contrib-1.1.6-1.i386.rpm
3760286 	kannel-manual-1.1.6-1.i386.rpm
682709		kannel-mysql-1.1.6-1.i386.rpm
2065668 	kannel-1.1.6-1.src.rpm

I also made a Sparc8 pkg.

I'm including the init script.You just need to create
"/etc/sysconfig/kannel" with :
BBCONFIG=/usr/local/etc/kannel.conf
WAPCONFIG=/usr/local/etc/kannel.conf
SMSCONFIG=/usr/local/etc/kannel.conf
BBOPTIONS="$BBCONFIG"
WAPOPTIONS="$WAPCONFIG"
SMSOPTIONS="$SMSCONFIG"
RUN_WAP="YES"
RUN_SMS="NO"

or edit the init script.

José Borges Ferreira




On Tue, 2002-04-30 at 16:08, Oded Arbel wrote:
> Attached is my almost final version of an init script for Kannel. it
> works on Mandrake and RedHat, but as it only depends on BASH, it should
> work anywhere where there's BASH 2 or greater.
> 
> How to use it - and modify the configuration at the top of the file
> (wapbox is commented out, so be sure to uncomment it if you want it).
> programs are listed in the order they are invoked at start, and are
> stopped at the reverse order. 
> call the script with 'start' to start all the programs, with 'stop' to
> stop all the programs and with 'status' to see if the programs are up or
> down.
> If a program crashes for any reason, the script will restart it
> automaticly, but in case of major trouble (the runner functions crashing
> too, for example. not that I can imagine why that would happen), I
> suggest running a cron job which calls the script with the parameter
> 'check' that will cause the script to check the status of the programs
> and restart everything if needed.
> 
> This script is chkconfig ready.
> 
> Enjoy.
> 
> --
> Oded Arbel
> m-Wise Inc.
> [email protected]
> (972)-67-340014
> (972)-9-9581711 (ext: 116)
> 
> ::..
> "Guns are made to be shot not thrown"
> 	--from 'Harley Davidson and the Marlboro Man'
> 
> 
> > -----Original Message-----
> > From: Steve Rapaport [mailto:[email protected]]
> > Sent: Tuesday, April 30, 2002 4:50 PM
> > To: [email protected]
> > Subject: Re: How to shutdown & restart Gateway development 
> > release 1.1.6
> > 
> > 
> > 
> > 
> > ----------  Forwarded Message  ----------
> > Subject: Re: How to shutdown & restart Gateway development 
> > release 1.1.6
> > Date: Tue, 30 Apr 2002 16:49:21 +0200
> > From: Steve Rapaport <[email protected]>
> > To: "Cipher Strength" <[email protected]>
> > 
> > 
> > >What is the better way to shutdown kannel. I have compiled 
> > it with --enable
> > >start-stop deamon it works on my testing machine but on 
> > production server
> > >kannel not stopped.(ppl already repoting bug)
> > >
> > >Also if i restart kannel by killing bearerbox smsbox 
> > automatically kills. so
> > >is it right  how it should be done
> > 
> > I second, third, and fourth that question!
> > 
> > I also note that Oded is working on a script to work
> > around the problem, but nobody seems to be working
> > on finding the bug or fixing it.  What gives?
> > 
> > 
> > Steve Rapaport.
> > 
> > -------------------------------------------------------
> > 
> > 
-- 
"Contrary to popular belief, penguins are not the salvation of modern
technology.  Neither do they throw parties for the urban proletariat."

#!/bin/sh
# Start/stop the Kannel boxes: One bearer box and one WAP box.

# chkconfig: - 86 16
# description:	Kannel is an Open Source SMS/WAP gateway. WAP is short for Wireless Application\
#		Protocol. It lets the phone act as a simple hypertext browser, but optimizes the\
#		markup language, scripting language, and the transmission protocols for wireless\
#		use. The optimized protocols are translated to normal Internet protocols by a WAP\
#		gateway. Kannel also works as a SMS gateway for GSM networks. Almost all GSM\
#		phones can send and receive SMS messages, so this is a way to serve many more\
#		clients than just those using WAP phones.
# processname: kannel
# config: /etc/sysconfig/kannel

# This is the default init.d script for Kannel.  Its configuration is
# appropriate for a small site running Kannel on one machine.

# Make sure that the Kannel binaries can be found in $BOXPATH or somewhere
# else along $PATH.  run_kannel_box has to be in $BOXPATH.

BBCONFIG=/usr/local/etc/kannel.conf
WAPCONFIG=/usr/local/etc/kannel.conf
SMSCONFIG=/usr/local/etc/kannel.conf
BBOPTIONS="$BBCONFIG"
WAPOPTIONS="$WAPCONFIG"
SMSOPTIONS="$SMSCONFIG"
RUN_WAP="YES"
RUN_SMS="YES"
# Source function library.
. /etc/init.d/functions

# Get config.
. /etc/sysconfig/network

if [ -f /etc/sysconfig/kannel ];then 
	. /etc/sysconfig/kannel
fi

# Check that networking is up.
if [ "$NETWORKING" = "no" ]
then
	exit 0
fi

RETVAL=0

startprog () {
	prog=$1
	echo -n "Starting $prog : "
	$prog $OPTIONS 2> /dev/null &
	RETVAL=$?
	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog 
	[ $RETVAL -eq 0 ] && echo_success
	[ $RETVAL -ne 0 ] && echo_failure
	echo
}
stopprog () {
	prog=$1
	echo -n "Stopping $prog: "
	killproc $prog 
	RETVAL=$?
	echo
	[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog 
}

startall () {
	OPTIONS=$BBOPTIONS && startprog "bearerbox"
	[ $RUN_WAP == "YES" ] && OPTIONS=$WAPOPTIONS && startprog "wapbox"
	[ $RUN_SMS == "YES" ] && OPTIONS=$SMSOPTIONS && startprog "smsbox"
}

stopall () {
	stopprog wapbox
	stopprog smsbox
	stopprog bearerbox
}
# See how we were called.
case "$1" in
  start)
	startall
	;;
  stop)
	stopall
	;;
  status)
	status bearerbox 
	status wapbox 
	status smsbox 
	;;
  restart|reload)
	stopall
	startall
	;;
  condrestart)
	[ -f /var/lock/subsys/$prog  ] && restart || :
	;;
  *)
	echo $"Usage: $0 {start|stop|status|restart|reload|condrestart}"
	exit 1
esac

exit $?