RE: PPG test

Just my 2 cents/pence.

I not quite sure if this helps, but looking at the way you are running
test_ppg you seemd to be using the syntax:

test_ppg server_path pap.doc sl.doc

Where pap.doc is your control document, and sl.doc is your content.
Where as it should be:

test_ppg server_path sl.doc pap.doc

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Aarno Syvänen
Sent: 05 August 2002 05:45
To: Shridhar Raju
Cc: Kannel Developers
Subject: Re: PPG test


Shridhar Raju kirjoittaa perjantaina, 2. elokuuta 2002, kello 10:02:Hi
all,
>
> I was doing PPG testing as explained in userguide. I'm using
> kannel1.2.0 RH
> 6.2. The kannel.conf shown below
>
> unified-prefix = "+91"

This strange. But of course, Kannel should not segfault because it.
But I think it should panic, if it cannot understand the configuration
file.

>
> group = ppg
> ppg-url = /wappush
> ppg-port = 8080
> concurrent-pushes = 100
> users = 1024
> ppg-allow-ip = "127.0.0.1"
> ppg-deny-ip = "192.168.1.*"
> trusted-pi = false
>
> group = wapbox
> bearerbox-host = localhost
> log-file = "/home/shridhar/wapbox.log"
> log-level = 0
> syslog-level = none
>
> group = smsc
> smsc = http
> smsc-id = HTTP
> port = 13003
> system-type = kannel
> smsc-username = foo
> smsc-password = bar
> no-sender = true
> no-coding = true
> send-url = http://localhost:12000/cgi-bin/sendsms
>
> group = smsbox
> bearerbox-host = localhost
>
> group = wap-push-user
> wap-push-user = foo
> ppg-username = foo
> ppg-password = bar
> allow-ip = 127.0.0.1
>
> Running
>
> #./test_ppg -q http://localhost:8080/wappush iptestppg.txt sl.txt
>
> 2002-08-02 12:17:43 [3] DEBUG: Octet string dump ends.
> 2002-08-02 12:17:43 [3] ERROR: connect failed
> 2002-08-02 12:17:43 [3] ERROR: System error 111: Connection refused
> 2002-08-02 12:17:43 [3] ERROR: error connecting to server `localhost' at
> port `8080'
> 2002-08-02 12:17:43 [3] DEBUG: HTTP: Opening NEW connection to
> `localhost:8080'(fd=0).
> 2002-08-02 12:17:43 [3] ERROR: Couldn't send request to
> <http://localhost:8080/wappush>
> 2002-08-02 12:17:43 [1] ERROR: push failed, no reason found
> 2002-08-02 12:17:43 [1] INFO: TEST_PPG: In thread 1 0 succeeded, 1
> failed
> 2002-08-02 12:17:43 [1] DEBUG: Thread 1 (test/test_ppg.c:push_thread)
> terminates.
> 2002-08-02 12:17:43 [0] INFO: TEST_PPG: 1 requests in 0.000000 seconds,
> inf
> requests per second
> 2002-08-02 12:17:43 [0] DEBUG: Waiting for 3
> (gwlib/http.c:write_request_thread) to terminate
> 2002-08-02 12:17:43 [3] DEBUG: Thread 3
> (gwlib/http.c:write_request_thread)
> terminates.
> 2002-08-02 12:17:43 [2] DEBUG: Thread 2 (gwlib/fdset.c:poller)
> terminates.
> 2002-08-02 12:17:43 [0] DEBUG: Immutable octet strings: 8.
>
> I'm running test_hhtp_server, which does not show any activity in whole
> process.
>
> #./test_http_server -l /home/shridhar/http.log -p 12000
>
> The bearerbox log
>
> 2002-08-02 12:01:09 [0] INFO: MAIN: Start-up done, entering mainloop
> 2002-08-02 12:01:09 [7] DEBUG: sms_router: list_len = 0
> 2002-08-02 12:01:14 [13] DEBUG: Started thread 15
> (gw/bb_boxc.c:function)
> 2002-08-02 12:17:39 [17] INFO: Client connected from <127.0.0.1>
> 2002-08-02 12:17:39 [17] DEBUG: setting up systems for new wapbox
> 2002-08-02 12:17:39 [17] DEBUG: Started thread 18
> (gw/bb_boxc.c:boxc_sender)
> 2002-08-02 12:17:43 [17] INFO: Connection closed by the box <127.0.0.1>
> 2002-08-02 12:17:43 [18] DEBUG: Thread 18 (gw/bb_boxc.c:boxc_sender)
> terminates.
> 2002-08-02 12:17:43 [17] DEBUG: Thread 17 (gw/bb_boxc.c:function)
> terminates.
>
> The wapbox log
>
> 2002-08-02 12:22:06 [0] INFO: Kannel wapbox version 1.2.0 starting up.
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 1
> (wap/wsp_session.c:main_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 2
> (wap/wsp_unit.c:main_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 3
> (wap/wsp_push_client.c:main_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 4
> (wap/timers.c:watch_timers)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 5
> (wap/wtp_init.c:main_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 6
> (wap/wtp_resp.c:main_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 7 (gw/wap-
> appl.c:main_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 8
> (gw/wap-appl.c:return_replies_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 9
> (gw/wap_push_ota.c:main_thread)
> 2002-08-02 12:22:06 [0] DEBUG: HTTP: Opening server at port 8080.
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 10 (gwlib/fdset.c:poller)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 11
> (gwlib/http.c:server_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 12
> (gw/wap_push_ppg.c:ota_read_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 13
> (gw/wap_push_ppg.c:http_read_thread)
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 14
> (gw/wap_push_ppg.c:pap_request_thread)
> 2002-08-02 12:22:06 [0] INFO: Connected to bearerbox at localhost port
> 13002.
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 15
> (gw/heartbeat.c:heartbeat_thread)
> 2002-08-02 12:22:06 [0] INFO: Connected to bearerbox at localhost port
> 13002.
> 2002-08-02 12:22:06 [0] DEBUG: Started thread 15
> (gw/heartbeat.c:heartbeat_thread)
> 2002-08-02 12:22:42 [11] DEBUG: HTTP: Creating HTTPClient for
> `127.0.0.1'.Segmentation fault
>
> and wapbox stops after this. I don't know where I'm going wrong in this
> whole process. Can some body guide me or send their conf file for
> reference.
>
> If I user ppg username & password
>
> #./test_ppg -q
> http://localhost:8080/wappush?username=vqi&password=vqindia
> iptestppg.txt sl.txt
> [1] 1015
> 2002-08-02 12:26:24 [0] INFO: a configuration file input assumed
> 2002-08-02 12:26:24 [0] ERROR: fopen failed: couldn't open
> `http://localhost:8080/wappush?username=vqi'
> 2002-08-02 12:26:24 [0] ERROR: System error 2: No such file or directory
> 2002-08-02 12:26:24 [0] PANIC: Failed to load main configuration file
> `http://localhost:8080/wappush?username=vqi'. Aborting!
> bash: iptestppg.txt: command not found
> [1]+  Exit 1                  ./test_ppg -q
> http://localhost:8080/wappush?username=vqi
>
>
> I'm using test/iptestppg.txt and test/sl.txt file for this test.
>
> Thanks in advance
>
> Shridhar Raju
>
>