Talked too early (dlr on at2)

I should shut up my mouth.
I said it worked too early just because of seeing a +CDS in the log.
In the bearer log (only for the first sms) I suddendly have an

2002-08-14 11:42:06 [5] DEBUG: AT2[A]: <-- +CDS: 25
2002-08-14 11:42:06 [5] DEBUG: AT2[A]: <--
0006270C91934397332602208041118342802080411183828000

Which does not depend from reading sim memory.

2002-08-14 11:42:35 [5] DEBUG: AT2[A]: --> AT+CPMS?^M
2002-08-14 11:42:35 [5] DEBUG: AT2[A]: <-- +CPMS: "SM",0,10,"SM",0,10
2002-08-14 11:42:35 [5] DEBUG: AT2[A]: <-- OK

By the way this +CDS never appears when sending other sms.

According to the cnmi for wavecom 4th e 5th parameters are:


<ds> for SMS-STATUS-REPORTs. Default is 0.

<ds> 0 : No SMS-STATUS-REPORTs are routed.

1 : SMS-STATUS-REPORTs are routed using unsolicited code :

+CDS : <length> <CR> <LF> <pdu> (PDU mode)

or

+CDS : <fo>,<mr>, [<ra>] , [<tora>], <scts>,<dt>,<st> (Text mode)

<bfr> Default is 0.

<bfr> 0 : TA buffer of unsolicited result codes defined within this command
is

flushed to the TE when <mode> 1.3 is entered (OK response

shall be given before flushing the codes)

1 : TA buffer of unsolicited result codes defined within this command is

cleared when <mode> 1.3 is entered.


Long way to run before I'll say it works :-((
Andrea