RE: CMG UCP60 Errors

To send UCP60 for login, you need to define 'smsc-username' not only 'smsc-password'.

-----Original Message-----
From: Muhamad Nasir Habizar [mailto:[email protected]]
Sent: Friday, September 06, 2002 7:25 AM
To: [email protected]
Subject: CMG UCP60 Errors


We have tried to connect to CMG SMSC using UCP60. The connection look fine but when we want to send SMS, the SMSC reply error. Below is the log file:
 
2002-09-05 17:16:10 [0] INFO: Starting to log to file /tmp/smsbox.log level 1
2002-09-05 17:16:10 [0] INFO: Added logfile `/tmp/smsbox.log' with level `1'.
2002-09-05 17:16:10 [0] INFO: Service global sender set as '72207'
2002-09-05 17:16:10 [0] INFO: Logging accesses to 'access.log'.
2002-09-05 17:16:10 [0] INFO: Started access logfile `access.log'.
2002-09-05 17:16:10 [0] DEBUG: HTTP: Opening server at port 13013.
2002-09-05 17:16:10 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2002-09-05 17:16:10 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)
2002-09-05 17:16:10 [0] INFO: Set up send sms service at port 13013
2002-09-05 17:16:10 [0] DEBUG: Started thread 3 (gw/smsbox.c:sendsms_thread)
2002-09-05 17:16:10 [0] DEBUG: ----------------------------------------------
2002-09-05 17:16:10 [0] DEBUG: Kannel smsbox version 1.2.0 starting
2002-09-05 17:16:10 [0] DEBUG: Started thread 4 (gw/smsbox.c:obey_request_thread)
2002-09-05 17:16:10 [0] DEBUG: Started thread 5 (gw/smsbox.c:url_result_thread)
2002-09-05 17:16:10 [0] INFO: Connected to bearerbox at 2.84.1.194 port 13001.
2002-09-05 17:16:10 [4] DEBUG: Started thread 7 (gw/bb_boxc.c:function)
2002-09-05 17:16:10 [0] DEBUG: Started thread 6 (gw/heartbeat.c:heartbeat_thread)
2002-09-05 17:16:10 [7] INFO: Client connected from <2.84.1.194>
2002-09-05 17:16:10 [7] DEBUG: Started thread 8 (gw/bb_boxc.c:boxc_sender)
2002-09-05 17:16:14 [2] DEBUG: HTTP: Creating HTTPClient for `2.84.1.194'.
2002-09-05 17:16:14 [3] INFO: smsbox: Got HTTP request </cgi-bin/sendsms> from <2.84.1.194>
2002-09-05 17:16:14 [3] INFO: sendsms used by <sfteam>
2002-09-05 17:16:14 [3] INFO: sendsms sender:<sfteam:72207> (2.84.1.194) to:<3128079> msg:<test>
2002-09-05 17:16:14 [3] DEBUG: message length 4, sending 1 messages
2002-09-05 17:16:14 [3] DEBUG: Status: 202 Answer: <Sent.>
2002-09-05 17:16:14 [3] DEBUG: HTTP: Resetting HTTPClient for `2.84.1.194'.
2002-09-05 17:16:14 [7] DEBUG: boxc_receiver: sms received
2002-09-05 17:16:14 [5] DEBUG: EMI2[smsfocal]: emi2 sending packet: <00/00070/O/51/3128079/72207/////////////////3//74657374/////////////25>
2002-09-05 17:16:14 [1] DEBUG: HTTP: Destroying HTTPClient area 0x80dd6c0.
2002-09-05 17:16:14 [1] DEBUG: HTTP: Destroying HTTPClient for `2.84.1.194'.
2002-09-05 17:16:14 [5] DEBUG: EMI2[smsfocal]: Got packet from the main socket
2002-09-05 17:16:14 [5] DEBUG: EMI2[smsfocal]: emi2 parsing packet: <00/00065/R/51/N/04/ Message not accepted, waiting for password/F6>
2002-09-05 17:16:14 [5] ERROR: EMI2[smsfocal]: Got negative ack. op:51, trn:0, error:4 (Operation not allowed), message: Message not accepted, waiting for password
2002-09-05 17:16:14 [5] INFO: EMI2[smsfocal]: Main connection closed by SMSC
2002-09-05 17:16:14 [5] DEBUG: EMI2[smsfocal]: clear_sent called
2002-09-05 17:16:14 [5] INFO: EMI2[smsfocal]: connecting to Primary SMSC

Our configuration is:
group = smsc
smsc = emi2
host = 10.122.25.140
port = 5401
smsc-password = password
keepalive = 55
idle-timeout = 30
my-number = 72207
 
group = smsbox
bearerbox-host = localhost
sendsms-port = 13131
sendsms-chars = "0123456789 "
global-sender = 72207
access-log = "kannel.access"
log-file = "smsbox.log"
log-level = 1
 
Do we need to set the OTON, NPI and Subtype. According to the technical team, we need to set the OTON to 6, NPI to 5 and Subtype to 4. Is there any settings in .config file that we need to change?.
 
Regards,
Nasir