RE: Siemens M20 configuration

You mention that there was a patch for the +cmti, can I use it or sould I
implement it myself

Avner


-----Original Message-----
From: Oded Arbel [mailto:[email protected]]
Sent: Tuesday, September 10, 2002 5:19 PM
To: Avner Sternheim; [email protected]
Subject: RE: Siemens M20 configuration



> -----Original Message-----
> From: Avner Sternheim [mailto:[email protected]]
> Sent: Tuesday, September 10, 2002 6:03 PM
> To: '[email protected]'
> Subject: Siemens M20 configuration
> 
> 
> 
> I've install the CVS version from 09/09 and I still have this message
> "+CMTI: "SM"
> what is wrong with the configuration or how can I implement 
> support for
> +CMTI 

+CMTI support is not in the CVS, nor it is planned for in the future. you
can implement it if you like - look at the AT2 source code. generally
speaking, you should change wait_modem_command() to recognize "+CMTI:", and
then use a code similar to read_sms_memory() to read the required memory
location and delete the SM from it, before calling pdu_extract() - which you
will have to modify too, to support your call. taking out the +CMGR, +CMGD
code from read_sms_memory() into a new function and then calling it from
read_sms_memory() and wait_modem_command(), is possibly a good idea.

> (still, I dont understand why I get messages from one device and from
> another I dont  to my siemens m20 modem )

different CNMI default settings (or non-default if the modem configuration
group defines it).

--
Oded Arbel
m-Wise mobile solutions
[email protected]

+972-9-9581711 (116)
+972-67-340014

::..
"We don't devote nearly enough scientific research to finding a cure for
jerks."
	-- Calvin and Hobbes