at vs at2: problem initialising wavecom

i observed that kannel can never initialise my wavecom modems the first time... the default speed of 9600 does not work and autodetection will fail....
at works though and once i start bearerbox successfully with at, i can then terminate it and restart with at2... is there some init string missing from at2?
i'm using 1.2.0 with this config...
group = smsc
smsc = at2
modemtype = wavecom
device = /dev/ttyS0
group = modems
id = wavecom
name = Wavecom
detect-string = "WAVECOM"

below is the bearerbox output for at2, as well as for at...
2002-09-17 10:46:55 [0] INFO: Debug_lvl = 0, log_file = <none>, log_lvl = 0
2002-09-17 10:46:55 [0] WARNING: DLR: using default 'internal' for storage type.
2002-09-17 10:46:55 [0] DEBUG: Kannel bearerbox version `1.2.0'.
System Linux, release 2.4.18-6mdk, version #1 Fri Mar 15 02:59:08 CET 2002, machine i686.

Libxml version 20424.
Using native malloc.

2002-09-17 10:46:55 [0] INFO: Added logfile `/tmp/bearerbox1.log' with level `0'.
2002-09-17 10:46:55 [0] INFO: ----------------------------------------
2002-09-17 10:46:55 [0] INFO: Kannel bearerbox II version 1.2.0 starting
2002-09-17 10:46:55 [0] INFO: Started access logfile `/tmp/access1.log'.
2002-09-17 10:46:55 [0] INFO: SSL not supported, no SSL initialization done.
2002-09-17 10:46:55 [0] DEBUG: HTTP: Opening server at port 13000.
2002-09-17 10:46:55 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2002-09-17 10:46:55 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)
2002-09-17 10:46:55 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)
2002-09-17 10:46:55 [0] DEBUG: starting smsbox connection module
2002-09-17 10:46:55 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)
2002-09-17 10:46:55 [0] INFO: AT2[/dev/ttyS0]: configuration shows modemtype <wavecom>
2002-09-17 10:46:55 [0] DEBUG: AT2[/dev/ttyS0]: Reading modem definitions from <kannel1.conf>
2002-09-17 10:46:55 [0] DEBUG: AT2[/dev/ttyS0]: Found <1> modems in config
2002-09-17 10:46:55 [0] INFO: AT2[/dev/ttyS0]: read modem definition for <Wavecom>
2002-09-17 10:46:55 [0] DEBUG: Started thread 5 (gw/smsc_at2.c:at2_device_thread)
2002-09-17 10:46:55 [5] INFO: AT2[/dev/ttyS0]: trying to use speed <9600> from modem definition
2002-09-17 10:46:55 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:46:55 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:46:55 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600
2002-09-17 10:46:55 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:46:55 [0] DEBUG: Started thread 6 (gw/bb_smscconn.c:sms_router)
2002-09-17 10:46:55 [0] INFO: MAIN: Start-up done, entering mainloop
2002-09-17 10:46:55 [0] DEBUG: AT2[/dev/ttyS0]: start called
2002-09-17 10:46:55 [6] DEBUG: sms_router: time to sleep
2002-09-17 10:46:55 [6] DEBUG: sms_router: list_len = 0
2002-09-17 10:46:57 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:01 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:05 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:09 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:47:09 [5] INFO: AT2[/dev/ttyS0]: speed in modem definition don't work, will autodetect
2002-09-17 10:47:09 [5] DEBUG: AT2[/dev/ttyS0]: detecting modem speed. 
2002-09-17 10:47:09 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:47:09 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:47:09 [5] INFO: AT2[/dev/ttyS0]: speed set to 57600
2002-09-17 10:47:09 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:47:11 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:15 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:19 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:23 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:47:23 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:47:23 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:47:23 [5] INFO: AT2[/dev/ttyS0]: speed set to 38400
2002-09-17 10:47:23 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:47:25 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:29 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:33 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:37 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:47:37 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:47:37 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:47:37 [5] INFO: AT2[/dev/ttyS0]: speed set to 19200
2002-09-17 10:47:37 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:47:39 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:43 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:47 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:51 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:47:51 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:47:51 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:47:51 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600
2002-09-17 10:47:51 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:47:53 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:57 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:48:01 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:48:05 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:48:05 [5] INFO: AT2[/dev/ttyS0]: cannot detect speed
2002-09-17 10:48:05 [5] DEBUG: Thread 5 (gw/smsc_at2.c:at2_device_thread) terminates.
2002-09-17 10:48:54 [0] WARNING: Killing signal received, shutting down...
2002-09-17 10:48:54 [0] DEBUG: Shutting down Kannel...
2002-09-17 10:48:54 [0] DEBUG: shutting down smsc
2002-09-17 10:48:54 [0] DEBUG: AT2[/dev/ttyS0]: Shutting down SMSCConn, slow
2002-09-17 10:48:54 [0] DEBUG: shutting down udp


--

2002-09-17 10:51:37 [0] INFO: Debug_lvl = 0, log_file = <none>, log_lvl = 0
2002-09-17 10:51:37 [0] WARNING: DLR: using default 'internal' for storage type.
2002-09-17 10:51:37 [0] DEBUG: Kannel bearerbox version `1.2.0'.
System Linux, release 2.4.18-6mdk, version #1 Fri Mar 15 02:59:08 CET 2002, machine i686.

Libxml version 20424.
Using native malloc.

2002-09-17 10:51:37 [0] INFO: Added logfile `/tmp/bearerbox1.log' with level `0'.
2002-09-17 10:51:37 [0] INFO: ----------------------------------------
2002-09-17 10:51:37 [0] INFO: Kannel bearerbox II version 1.2.0 starting
2002-09-17 10:51:37 [0] INFO: Started access logfile `/tmp/access1.log'.
2002-09-17 10:51:37 [0] INFO: SSL not supported, no SSL initialization done.
2002-09-17 10:51:37 [0] DEBUG: HTTP: Opening server at port 13000.
2002-09-17 10:51:37 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2002-09-17 10:51:37 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)
2002-09-17 10:51:37 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)
2002-09-17 10:51:37 [0] DEBUG: starting smsbox connection module
2002-09-17 10:51:37 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)
2002-09-17 10:51:37 [0] DEBUG: AT: Command: AT
2002-09-17 10:51:37 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:37 [0] DEBUG: AT: Command: AT&F
2002-09-17 10:51:37 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:37 [0] DEBUG: AT: Command: AT
2002-09-17 10:51:37 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:37 [0] DEBUG: AT: Command: ATE0
2002-09-17 10:51:37 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:37 [0] DEBUG: AT: Command: ATI
2002-09-17 10:51:37 [0] DEBUG: Read from modem: 'WAVECOM MODEM     MULTIBAND  900E  1800     OK'
2002-09-17 10:51:38 [0] DEBUG: AT: Command: ATI1
2002-09-17 10:51:38 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:39 [0] DEBUG: AT: Command: ATI2
2002-09-17 10:51:39 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:40 [0] DEBUG: AT: Command: ATI3
2002-09-17 10:51:41 [0] DEBUG: Read from modem: '420_09gm.2C 1171736 042301 17:30    OK'
2002-09-17 10:51:42 [0] DEBUG: AT: Command: ATI4
2002-09-17 10:51:42 [0] DEBUG: Read from modem: 'Q:0 V:1 S0:000 S2:043 S3:013 S4:010 S5:008  +CR:0 +CRC:0 +CMEE:0 +CBST:0,0,1  +SPEAKER:0 +ECHO:0,1 &C:1 &D:2 %C:0  +IPR:9600 +ICF:3,4 +IFC:2,2    OK'
2002-09-17 10:51:43 [0] DEBUG: AT: Command: AT+CPIN?
2002-09-17 10:51:43 [0] DEBUG: Read from modem: '+CPIN: READY'
2002-09-17 10:51:43 [0] DEBUG: AT: Command: AT+CMGF=0
2002-09-17 10:51:43 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:44 [0] DEBUG: AT: Command: AT+CNMI=1,2,0,0,0
2002-09-17 10:51:44 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:44 [0] INFO: AT SMSC successfully opened.
2002-09-17 10:51:44 [0] DEBUG: Started thread 5 (gw/smsc_wrapper.c:wrapper_receiver)
2002-09-17 10:51:44 [0] DEBUG: Started thread 6 (gw/smsc_wrapper.c:wrapper_sender)
2002-09-17 10:51:44 [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router)
2002-09-17 10:51:44 [0] INFO: MAIN: Start-up done, entering mainloop
2002-09-17 10:51:44 [0] DEBUG: Starting wrapper
2002-09-17 10:51:44 [7] DEBUG: sms_router: time to sleep
2002-09-17 10:51:44 [7] DEBUG: sms_router: list_len = 0



-> [email protected]


---------------------------------
Do you Yahoo!?
Yahoo! News - Today's headlines