RE: at vs at2: problem initialising wavecom

It's a known problem - check the STATUS file for a simple workaround. we're not sure yet why AT doesn't have that problem, but we will solve it eventually (unless you can solve it faster :-). except for that problem, AT2 is far superior to AT, if only for the fact that AT2 is still being actively developed and supported, and should be used instead of AT.
 
--
Oded Arbel
m-Wise mobile solutions
[email protected]
 
+972-9-9581711 (116)
+972-67-340014
 
::..
Math is like love -- a simple idea but it can get complicated.

 



-----Original Message-----
From: Anarchy [mailto:[email protected]]
Sent: Tuesday, September 17, 2002 6:27 AM
To: [email protected]
Subject: at vs at2: problem initialising wavecom



i observed that kannel can never initialise my wavecom modems the first time... the default speed of 9600 does not work and autodetection will fail.... 


at works though and once i start bearerbox successfully with at, i can then terminate it and restart with at2... is there some init string missing from at2? 


i'm using 1.2.0 with this config... 


group = smsc
smsc = at2
modemtype = wavecom
device = /dev/ttyS0 


group = modems
id = wavecom
name = Wavecom
detect-string = "WAVECOM"

below is the bearerbox output for at2, as well as for at... 


2002-09-17 10:46:55 [0] INFO: Debug_lvl = 0, log_file = <none>, log_lvl = 0
2002-09-17 10:46:55 [0] WARNING: DLR: using default 'internal' for storage type.
2002-09-17 10:46:55 [0] DEBUG: Kannel bearerbox version `1.2.0'.
System Linux, release 2.4.18-6mdk, version #1 Fri Mar 15 02:59:08 CET 2002, machine i686.

Libxml version 20424.
Using native malloc.

2002-09-17 10:46:55 [0] INFO: Added logfile `/tmp/bearerbox1.log' with level `0'.
2002-09-17 10:46:55 [0] INFO: ----------------------------------------
2002-09-17 10:46:55 [0] INFO: Kannel bearerbox II version 1.2.0 starting
2002-09-17 10:46:55 [0] INFO: Started access logfile `/tmp/access1.log'.
2002-09-17 10:46:55 [0] INFO: SSL not supported, no SSL initialization done.
2002-09-17 10:46:55 [0] DEBUG: HTTP: Opening server at port 13000.
2002-09-17 10:46:55 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2002-09-17 10:46:55 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)
2002-09-17 10:46:55 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)
2002-09-17 10:46:55 [0] DEBUG: starting smsbox connection module
2002-09-17 10:46:55 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)
2002-09-17 10:46:55 [0] INFO: AT2[/dev/ttyS0]: configuration shows mode! mt! ype <wavecom>
2002-09-17 10:46:55 [0] DEBUG: AT2[/dev/ttyS0]: Reading modem definitions from <kannel1.conf>
2002-09-17 10:46:55 [0] DEBUG: AT2[/dev/ttyS0]: Found <1> modems in config
2002-09-17 10:46:55 [0] INFO: AT2[/dev/ttyS0]: read modem definition for <Wavecom>
2002-09-17 10:46:55 [0] DEBUG: Started thread 5 (gw/smsc_at2.c:at2_device_thread)
2002-09-17 10:46:55 [5] INFO: AT2[/dev/ttyS0]: trying to use speed <9600> from modem definition
2002-09-17 10:46:55 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:46:55 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:46:55 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600
2002-09-17 10:46:55 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:46:55 [0] DEBUG: Started thread 6 (gw/bb_smscconn.c:sms_router)
2002-09-17 10:46:55 [0] INFO: MAIN: Start-up done, entering mainloop
2002-09-17 10:46:55 [0] DEBUG: AT2[/dev/ttyS0]: start called
2002-09-17 10:46:55 [! 6]! DEBUG: sms_router: time to sleep
2002-09-17 10:46:55 [6] DEBUG: sms_router: list_len = 0
2002-09-17 10:46:57 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:01 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:05 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:09 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:47:09 [5] INFO: AT2[/dev/ttyS0]: speed in modem definition don't work, will autodetect
2002-09-17 10:47:09 [5] DEBUG: AT2[/dev/ttyS0]: detecting modem speed. 
2002-09-17 10:47:09 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:47:09 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:47:09 [5] INFO: AT2[/dev/ttyS0]: speed set to 57600
2002-09-17 10:47:09 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:47:11 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:15 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:19 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 ! 10! :47:23 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:47:23 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:47:23 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:47:23 [5] INFO: AT2[/dev/ttyS0]: speed set to 38400
2002-09-17 10:47:23 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:47:25 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:29 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:33 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:37 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:47:37 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:47:37 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:47:37 [5] INFO: AT2[/dev/ttyS0]: speed set to 19200
2002-09-17 10:47:37 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:47:39 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:43 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:47 [5] DEBUG: AT2[/d! ev! /ttyS0]: --> AT^M
2002-09-17 10:47:51 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:47:51 [5] INFO: AT2[/dev/ttyS0]: opening device
2002-09-17 10:47:51 [5] DEBUG: AT2[/dev/ttyS0]: device opened
2002-09-17 10:47:51 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600
2002-09-17 10:47:51 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M
2002-09-17 10:47:53 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:47:57 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:48:01 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2002-09-17 10:48:05 [5] INFO: AT2[/dev/ttyS0]: closing device
2002-09-17 10:48:05 [5] INFO: AT2[/dev/ttyS0]: cannot detect speed
2002-09-17 10:48:05 [5] DEBUG: Thread 5 (gw/smsc_at2.c:at2_device_thread) terminates.
2002-09-17 10:48:54 [0] WARNING: Killing signal received, shutting down...
2002-09-17 10:48:54 [0] DEBUG: Shutting down Kannel...
2002-09-17 10:48:54 [0] DEBUG: shutting down smsc
2002-09-17 10:48:54 [0] DEBUG: AT2[/dev! /t! tyS0]: Shutting down SMSCConn, slow
2002-09-17 10:48:54 [0] DEBUG: shutting down udp


--

2002-09-17 10:51:37 [0] INFO: Debug_lvl = 0, log_file = <none>, log_lvl = 0
2002-09-17 10:51:37 [0] WARNING: DLR: using default 'internal' for storage type.
2002-09-17 10:51:37 [0] DEBUG: Kannel bearerbox version `1.2.0'.
System Linux, release 2.4.18-6mdk, version #1 Fri Mar 15 02:59:08 CET 2002, machine i686.

Libxml version 20424.
Using native malloc.

2002-09-17 10:51:37 [0] INFO: Added logfile `/tmp/bearerbox1.log' with level `0'.
2002-09-17 10:51:37 [0] INFO: ----------------------------------------
2002-09-17 10:51:37 [0] INFO: Kannel bearerbox II version 1.2.0 starting
2002-09-17 10:51:37 [0] INFO: Started access logfile `/tmp/access1.log'.
2002-09-17 10:51:37 [0] INFO: SSL not supported, no SSL initialization done.
2002-09-17 10:51:37 [0] DEBUG: HTTP: Opening server at port 13000.
2002-09-17 10:51:37 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2002-09-17 10:51:37 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)
2002-09-17 10:51:37 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)
2002-09-17 10:51:37 [0] DEBUG: starting smsbox connection module
2002-09-17 10:51:37 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)
2002-09-17 10:51:37 [0] DEBUG: AT: Command: AT
2002-09-17 10:51:37 [! 0]! DEBUG: Read from modem: 'OK'
2002-09-17 10:51:37 [0] DEBUG: AT: Command: AT&F
2002-09-17 10:51:37 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:37 [0] DEBUG: AT: Command: AT
2002-09-17 10:51:37 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:37 [0] DEBUG: AT: Command: ATE0
2002-09-17 10:51:37 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:37 [0] DEBUG: AT: Command: ATI
2002-09-17 10:51:37 [0] DEBUG: Read from modem: 'WAVECOM MODEM     MULTIBAND  900E  1800     OK'
2002-09-17 10:51:38 [0] DEBUG: AT: Command: ATI1
2002-09-17 10:51:38 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:39 [0] DEBUG: AT: Command: ATI2
2002-09-17 10:51:39 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:40 [0] DEBUG: AT: Command: ATI3
2002-09-17 10:51:41 [0] DEBUG: Read from modem: '420_09gm.2C 1171736 042301 17:30    OK'
2002-09-17 10:51:42 [0] DEBUG: AT: Command: ATI4
20! 02! -09-17 10:51:42 [0] DEBUG: Read from modem: 'Q:0 V:1 S0:000 S2:043 S3:013 S4:010 S5:008  +CR:0 +CRC:0 +CMEE:0 +CBST:0,0,1  +SPEAKER:0 +ECHO:0,1 &C:1 &D:2 %C:0  +IPR:9600 +ICF:3,4 +IFC:2,2    OK'
2002-09-17 10:51:43 [0] DEBUG: AT: Command: AT+CPIN?
2002-09-17 10:51:43 [0] DEBUG: Read from modem: '+CPIN: READY'
2002-09-17 10:51:43 [0] DEBUG: AT: Command: AT+CMGF=0
2002-09-17 10:51:43 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:44 [0] DEBUG: AT: Command: AT+CNMI=1,2,0,0,0
2002-09-17 10:51:44 [0] DEBUG: Read from modem: 'OK'
2002-09-17 10:51:44 [0] INFO: AT SMSC successfully opened.
2002-09-17 10:51:44 [0] DEBUG: Started thread 5 (gw/smsc_wrapper.c:wrapper_receiver)
2002-09-17 10:51:44 [0] DEBUG: Started thread 6 (gw/smsc_wrapper.c:wrapper_sender)
2002-09-17 10:51:44 [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router)
2002-09-17 10:51:44 [0] INFO: MAIN: Start-up done, entering mainloop
2002-09-! 17! 10:51:44 [0] DEBUG: Starting wrapper
2002-09-17 10:51:44 [7] DEBUG: sms_router: time to sleep
2002-09-17 10:51:44 [7] DEBUG: sms_router: list_len = 0




-> [email protected] 




  _____  

Do you Yahoo!?
Yahoo! News <http://news.yahoo.com/>  - Today's headlines