RE: send data message with Siemens M20 ERROR 500

Nothing come to mind, but if you figure it out - let me know :-)

--
Oded Arbel
m-Wise mobile solutions
[email protected]

+972-9-9581711 (116)
+972-67-340014

::..
Happiness often sneaks in through a door you didn't know you left open.




> -----Original Message-----
> From: Avner Sternheim [mailto:[email protected]]
> Sent: Tuesday, September 24, 2002 11:55 AM
> To: Oded Arbel; [email protected]
> Subject: RE: send data message with Siemens M20 ERROR 500
> 
> 
> Is there no other way to send data messages ?
> 
> -----Original Message-----
> From: Oded Arbel [mailto:[email protected]]
> Sent: Tuesday, September 24, 2002 10:40 AM
> To: Avner Sternheim; [email protected]
> Subject: RE: send data message with Siemens M20 ERROR 500
> 
> 
> I've seen this problem too, and I think that this is a modem specific
> problem - I have no problem sending the exact same data on 
> another type of
> modem. I have yet to find a workaround.
> 
> --
> Oded Arbel
> m-Wise mobile solutions
> [email protected]
> 
> +972-9-9581711 (116)
> +972-67-340014
> 
> ::..
> "The difference between fiction and reality? Fiction has to 
> make sense."
> 	-- Tom Clancy
> 
> 
> 
> 
> > -----Original Message-----
> > From: Avner Sternheim [mailto:[email protected]]
> > Sent: Tuesday, September 24, 2002 11:36 AM
> > To: '[email protected]'
> > Subject: send data message with Siemens M20 ERROR 500
> > 
> > 
> > Hi all,
> > 
> > When I tried to send 8bit messages from the kannel via M20 
> > modem and set the
> > conding to 8bit (coding=2)
> > I got the following error, what is the problem ? and how it 
> > can be fixed ?
> > 
> > 2002-09-24 11:28:48 [6] DEBUG: AT2[/dev/ttyS1]: -->
> > 001100098150444640F70004A703FF00FF 
> > 2002-09-24 11:28:48 [6] DEBUG: AT2[/dev/ttyS1]: --> ^Z 
> > 2002-09-24 11:28:53 [6] DEBUG: AT2[/dev/ttyS1]: <-- > 
> > 2002-09-24 11:28:53 [6] DEBUG: AT2[/dev/ttyS1]: <-- +CMS ERROR: 500 
> > 2002-09-24 11:28:53 [6] ERROR: AT2[/dev/ttyS1]: CMS ERROR: 
> > +CMS ERROR: 500 
> > 2002-09-24 11:28:53 [6] DEBUG: AT2[/dev/ttyS1]: send command 
> > status: 1 
> > 2002-09-24 11:28:53 [1] DEBUG: Dumping 0 messages and 0 
> acks to store 
> > 
> > 
> > 
>