RE: 31 characters (was: Funny)

I was able to send the message without a problem... 

Whatever bug you'r looking at here, it is not related to the bug I
solved. The patch I submited solved the problem for messages that, after
encoding, ended in 00. This message ends in 14.

I advice taking a look at kannel.log and see what is going on with the
communication with the modem (see http://www.dreamfabric.com/sms/ for
help with the PDU)

Best of luck,
Rodrigo

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Rene Kluwen
> Sent: Thursday, October 24, 2002 2:27 PM
> To: Rodrigo Sousa Coutinho
> Cc: [email protected]
> Subject: RE: 31 characters (was: Funny)
> 
> 
> Thanks for the patch. The messages mentioned seem to work now.
> 
> At this moment I am still having a problem that some messages 
> cannot be sent though.
> 
> Small messages (< 10 chars) seem ok. The following string:
> "Uw systeem is op transport gegaan op 03-10-2002 om 16:11:00 
> (Ordernummer 42015656)" does not want to sent - whatever I try.
> 
> I am still looking into this...
> 
> 
> 
> On Tue, 2002-10-22 at 16:59, Rodrigo Sousa Coutinho wrote:
> > 
> > Hello,
> > 
> > This is a bug in the 7 bit encoding, and is not directly 
> related with 
> > the size of the message:
> > 	-> "123456789012345678901234567890z" works (31 chars)
> > 	-> "......." does not work (7 chars)
> > 
> > In attachment goes the patch that solves this bug.
> > 
> > Regards,
> > Rodrigo
> > 
> > 
> > -----Original Message-----
> > From: [email protected] 
> > [mailto:[email protected]]
> > On Behalf Of Rene Kluwen
> > Sent: Friday, October 18, 2002 3:03 AM
> > To: [email protected]
> > Subject: 31 characters (was: Funny)
> > 
> > 
> > I tracked it down to:
> > All messages of 31 characters won't send (in my case).
> > 
> > I tested using both a Siemens SL45 and a Siemens M35.
> > 
> > Is this a Siemens thingy? Or is something wrong packing the 
> PDU? Could 
> > anybody confirm or deny this using a non-Siemens phone?
> > 
> > I will see if I can find something in the source when it is 
> not 4am in 
> > the morning anymore ;)
> > 
> > -- Rene...
> > 
> > --------
> > This email message has been automatically scanned for viri using 
> > Sophos antivirus.
> > --------
> > ----- Original Message -----
> > From: Rene Kluwen / Chimit Software Solutions 
> > To: [email protected] 
> > Sent: Friday, October 18, 2002 3:49 AM
> > Subject: Funny...
> > 
> > 
> > The following message:
> > 
> > "Slotkoers ABN Amro: 15.00 Euro." (without the quotes) won't send 
> > using the AT2 smsc.
> > 
> > >From the logs:
> > ==> /var/log/kannel/bearerbox.log <==
> > 2002-10-18 03:46:29 [5] DEBUG: AT2[mysmsc]: 
> TP-Validity-Period: 24.0 
> > hours 2002-10-18 03:46:29 [5] DEBUG: AT2[mysmsc]: --> AT+CMGS=40^M
> > 2002-10-18 03:46:29 [5] DEBUG: AT2[mysmsc]: <-- >
> > 2002-10-18 03:46:29 [5] DEBUG: AT2[mysmsc]: send command status: 1
> > 2002-10-18 03:46:29 [5] DEBUG: AT2[mysmsc]: -->
> > 
> 0031000A8160229761500000A71F53F69BBE7E97E5735050E80405DBF2B70E
> 14ABB96030
> > 50B12E7FBB
> > 2002-10-18 03:46:29 [5] DEBUG: AT2[mysmsc]: --> ^Z
> > 2002-10-18 03:46:29 [5] DEBUG: AT2[mysmsc]: <-- >
> > 2002-10-18 03:46:29 [5] DEBUG: AT2[mysmsc]: <-- ERROR
> > 
> > If I change any character within the message... Or if I add 
> or remove 
> > 1 character... It will send... But just this particular message 
> > doesn't work...
> > 
> > Does anybody have any idea why?
> > 
> > 
> > --------
> > This email message has been automatically scanned for viri using 
> > Sophos antivirus.
> > --------
> 
> 
> 
>