RE: Kannel snapshot and Vodaphone Spain

Maybe you can provide with PDU dumps to see what's happening.


-----Mensaje original-----
De: Arne K. Haaje [mailto:[email protected]]
Enviado el: miércoles 26 de febrero de 2003 16:31
Para: Angel Fradejas; [email protected]
Asunto: Re: Kannel snapshot and Vodaphone Spain


onsdag 26. februar 2003, 16:06, skrev Angel Fradejas:
> Forgot to say, I always supply the destination number in +346xxxxxxxx
> format.
>
> -----Mensaje original-----
> De: [email protected] [mailto:[email protected]]En
> nombre de Angel Fradejas
> Enviado el: miércoles 26 de febrero de 2003 15:57
> Para: Arne K. Haaje; [email protected]
> Asunto: RE: Kannel snapshot and Vodaphone Spain
>
>
> I have these values in my smsc-group:
>
> #GSM_ADDR_TON_UNKNOWN
> source-addr-ton = 0
> #GSM_ADDR_NPI_E164
> source-addr-npi = 1
> # for 0xFX dcs values
> alt-dcs = yes
>
> and successfully work with Vodaphone Spain.
>
> Angel Fradejas
> Mediafusión España, S.A.
> [email protected]
> www.mediafusion.es
> Tel. +34 91 252 32 00
> Fax +34 91 572 27 08
>
>
>
> -----Mensaje original-----
> De: Arne K. Haaje [mailto:[email protected]]
> Enviado el: miércoles 26 de febrero de 2003 15:43
> Para: Angel Fradejas; [email protected]
> Asunto: Re: Kannel snapshot and Vodaphone Spain
>
> onsdag 26. februar 2003, 15:19, skrev Angel Fradejas:
> > Try
> >
> > regular text: &coding=2
> > flash       : &coding=2&mclass=1
> >
> > and don't forget to use
> >
> > alt-dcs = yes
> >
> > on your smsc-group.
> >
> > If you leave coding unset, you'll have 7bit, and you won't get a dcs
that
> > is accepted by Vodaphone Spain.
>
> Thanks, but I still can not receive the messages. Do I need to set
anything
> else in the smsc-group - ton, npi etc. ?
>
> I am using the same config as the patched 1.1.5, but I receive no messages
> - nether text or binary.

This is my setup;

# SMSC CONNECTIONS
group = smsc
smsc = smpp
smsc-id = ES_AIRTEL
host = 212.73.32.54
port = 2567
preferred-smsc-id = ES_AIRTEL
receive-port = 2567
smsc-username =
smsc-password =
system-type = "MESS"
address-range = ""
preferred-prefix = "34"
alt-dcs = yes
source-addr-ton = 0
#GSM_ADDR_NPI_E164
source-addr-npi = 1
# SMSBOX SETUP

I send with coding=2 and the +346xxxxxxxx format, but I receive no messages.
Is there something I need to change in the smsc group?

--
Med vennlig hilsen,
Eurobate ASA

Arne K. Haaje
Senior Network Engineer
--------------------------------------------------------------------
    Eurobate ASA - Postboks 4589 Nydalen - 0404 Oslo - Norway
Phone: +47 23 22 73 73 - Fax: +47 23 22 73 74 - Mob: +47 92 88 44 66
                    http://www.eurobate.com/