Re: Fw: Re: Assertion failed in PPG

And what I should to do?

> Exactly same as mine.
> 
> > my SL.xml:
> > <?xml version="1.0"?>
> > <!DOCTYPE sl PUBLIC "-//WAPFORUM//DTD SL 1.0//EN"
> >             "http://www.wapforum.org/DTD/sl.dtd">
> >  <sl href="http://wap.mobicomk.ru/mobicomk"
> >      action="execute-high">
> >  </sl>
> >
> >> I still cannot reproduce (with MacOS X and PowerPC). What was your
> >> sl content ?
> >>
> >> Aarno
> >>
> >> On Wednesday, May 21, 2003, at 05:28 PM, Yury Mikhienko wrote:
> >>
> >>> I use the following call syntax:
> >>> ./test_ppg -c sl
> >>> "http://10.10.5.11:8080/cgi-bin/wap-
> >>> push.cgi?username=ppgu&password=bar" "SL.xml" "PAP.xml"
> >>> my PAP.xml:
> >>> <?xml version="1.0"?>
> >>>  <!DOCTYPE pap PUBLIC "-//WAPFORUM//DTD PAP//EN"
> >>>          "http://www.wapforum.org/DTD/pap_1.0.dtd">
> >>>  <pap>
> >>>    <push-message
> >>>          push-id="[email protected]"
> >>>          deliver-before-timestamp="2003-05-20T00:00:00Z"
> >>>          deliver-after-timestamp="2003-05-10T00:00:00Z"
> >>>          progress-notes-requested="true">
> >>>
> >>>          <address
> >>>
> >>> address-value="WAPPUSH=+79282010199/[email protected]">
> >>>          </address>
> >>>
> >>>          <quality-of-service
> >>>                  priority="low"
> >>>                  delivery-method="unconfirmed"
> >>>                  network-required="true"
> >>>                  network="GSM"
> >>>                  bearer-required="true"
> >>>                  bearer="SMS"/>
> >>>
> >>>    </push-message>
> >>>  </pap>
> >>>
> >>>> What was your command line ?
> >>>>
> >>>> Aarno
> >>>>
> >>>> On Wednesday, May 21, 2003, at 03:06 PM, Yury Mikhienko wrote:
> >>>>
> >>>>> Yes.
> >>>>>
> >>>>>> How did you send sl. With test_ppg ?
> >>>>>>
> >>>>>> Aarno
> >>>>>>
> >>>>>> On Tuesday, May 20, 2003, at 01:22 PM, Yury Mikhienko wrote:
> >>>>>>
> >>>>>>>
> >>>>>>> I have the some problem (if try send the SL message), and get the
> >>>>>>> following assertion:
> >>>>>>> *************************************
> >>>>>>> 2003-05-14 11:34:50 [14] PANIC: gwlib/octstr.c:2146:
> >>>>>>> seems_valid_real:
> >>>>>>> Assertion `ostr->data[ostr->len] == '\0'' failed. (Called from
> >>>>>>> gwlib/octstr.c:247:octstr_destroy.)
> >>>>>>> ************************************
> >>>>>>> I  use the latest cvs version of kannel on SunOS.
> >>>>>>>
> >>>>>>>> Hi, all.
> >>>>>>>> I don't know is it problem in PPG or something else but if I try
> >>>>>>>> to
> >>>>>>>> send
> >>>>>>>> push from not allowed ip, I get assertion failed and wapbox
> >>>>>>>> restarted.
> >>>>>>>>
> >>>>>>>> Wapbox log file:
> >>>>>>>> 2003-05-20 13:14:02 [11] DEBUG: HTTP: Creating HTTPClient for
> >>>>>>>> `10.20.8.13'.
> >>>>>>>> 2003-05-20 13:14:02 [14] WARNING: did not found ip from any of
> >>>>>>>> core
> >>>>>>>> lists, deny it
> >>>>>>>> 2003-05-20 13:14:02 [14] ERROR: Request </cgi-bin/wap-push.cgi>
> >>>>>>>> from
> >>>>>>>> <10.20.8.13>: ip forbidden, closing the client
> >>>>>>>> 2003-05-20 13:14:02 [14] DEBUG: HTTP: Destroying HTTPClient area
> >>>>>>>> 0x8154308.
> >>>>>>>> 2003-05-20 13:14:02 [14] DEBUG: HTTP: Destroying HTTPClient for
> >>>>>>>> `10.20.8.13'.
> >>>>>>>> 2003-05-20 13:14:02 [14] PANIC: gwlib/octstr.c:2138:
> >>>>>>>> seems_valid_real: Assertion
> >>>>>>>> `ostr->len + 1 <= ostr->size' failed. (Called from
> >>>>>>>> gwlib/octstr.c:247:octstr_destroy.)
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>  From configuration file:
> >>>>>>>>
> >>>>>>>> group = ppg
> >>>>>>>> ppg-url = /cgi-bin/wap-push.cgi
> >>>>>>>> ppg-port = 8091
> >>>>>>>> concurrent-pushes = 100
> >>>>>>>> # ignore all security restrictions; only for test!!!
> >>>>>>>> trusted-pi = false
> >>>>>>>> users = 1024
> >>>>>>>> global-sender = xxxxxxx
> >>>>>>>> ppg-allow-ip = 127.0.0.1;10.30.40.6;10.10.253.4
> >>>>>>>> #ssl-server-cert-file =
> >>>>>>>> "/home/aarno/kannelcvs/gateway/gw/cert.pem"
> >>>>>>>> #ssl-server-key-file = 
> >>>>>>>> "/home/aarno/kannelcvs/gateway/gw/key.pem"
> >>>>>>>> #ppg-port-ssl = no
> >>>>>>>> default-smsc = cimd2
> >>>>>>>>
> >>>>>>>> # PPG USER SETUP, for authorizing a specific push user
> >>>>>>>>
> >>>>>>>> group = wap-push-user
> >>>>>>>> wap-push-user = xxxxxx
> >>>>>>>> ppg-username = xxxxxx
> >>>>>>>> ppg-password = xxxxxx
> >>>>>>>> #allowed-prefix = 40;60;70
> >>>>>>>> #denied-prefix = 50
> >>>>>>>> #white-list = http://localhost:8082/whitelist
> >>>>>>>> #black-list =  http://localhost:8082/blacklist
> >>>>>>>> allow-ip = 127.0.0.1;10.30.40.6;10.10.253.4
> >>>>>>>> deny-ip = 194.100.32.82
> >>>>>>>> default-smsc = cimd2
> >>>>>>>>
> >>>>>
> >>>>> -- 
> >>>>>
> >>>>> Best regards,
> >>>>> Yury Mikhienko.
> >>>>> IT engineer, ZAO "Mobicom-Kavkaz"
> >>>>>
> >>>
> >>>
> >>> -- 
> >>>
> >>> Best regards,
> >>> Yury Mikhienko.
> >>> IT engineer, ZAO "Mobicom-Kavkaz"
> >>>
> >
> >
> > -- 
> >
> > Best regards,
> > Yury Mikhienko.
> > IT engineer, ZAO "Mobicom-Kavkaz"
> >


-- 
 
Best regards,
Yury Mikhienko.
IT engineer, ZAO "Mobicom-Kavkaz"