Re: Help with Kannel 1.2.1 when sending Picture Message

Dear Shridhar,

Thanks for the reply.

I have tried using URL encoding my text string but it shows up on my phone as #@%$&} which is garbage, only when I use the udh as URL encoding and the text as a string with the option of coding=1 then the ringtone will appear properly on my phone.

But when I try this method with the picture message, it appears as 3 separate garbage message showing @#$!%{>.

I'm using a wavecom modem and my mobile phone is a nokia 6610.

I'm not sure whether it is my message string or my kannel.conf file that is causing the problem. Do I have to use AT or AT2 for my wavecom modem ?

Are there any special settings that I have to look out for ?

Can you forward to me your kannel.conf file so that I can compare and see where my settings are wrong ?

Thanks,
Freeman

On Sat, 2 Aug 2003 18:56:33 +0530, Shridhar Raju wrote:
>URL encode text value as u have done with UDH.
>
>like
>
>(Ringtone)
>http://198.198.1.150:13013/cgi-
>bin/sendsms?username=tester&password=foobar&t
>o=91234567&udh=%06%05%04%15%81%15%81&text=%02%4A%3A%51%D1%95%CD%D0%04%00%1B%20%55%05%90%61%05%60%55%85%50%54%85%40%82%08%49%90%00%00
>
>coding parameter is not required when udh is present.
>
>Hope this works.
>
>Shridhar Raju
>
>----- Original Message -----
>From: "Freeman Tan" <[email protected]>
>To: <[email protected]>
>Sent: Saturday, August 02, 2003 3:20 PM
>Subject: Help with Kannel 1.2.1 when sending Picture Message
>
>
>Hi,
>
>I have installed Kannel 1.2.1 on Knoppix Linux and I can send text
>and
>ringtones with the following http commands:
>
>(Text)
>http://198.198.1.150:13013/cgi-
>bin/sendsms?username=tester&password=foobar&t
>o=91234567&text=Kannel+is+working+!
>
>(Ringtone)
>http://198.198.1.150:13013/cgi-
>bin/sendsms?username=tester&password=foobar&t
>o=91234567&udh=%06%05%04%15%81%15%81&text=024A3A51D195CDD004001B20550
>5906105
>60558550548540820849900000&coding=1
>
>(Picture Message)
>http://198.198.1.150:13013/cgi-
>bin/sendsms?username=tester&password=foobar&t
>o=98555963&udh=%06%05%04%15%8A%15%8A&text=300000045465737402010000481
>C016666
>66666666666666999999999999999999800000000000000001400000006000E000024
>000000E
>900310000280000031080CF3B801800000400411044401400000FFFE2F8B120240000
>0000053
>8CAA0280000000006289C401800000000041414001400000000001428002400020000
>00B0504
>158A0000000301030201428001F0000000A28001800FFE000000A500015FFFFFFFFFF
>EA57FFA
>400AAA0000005500028201500440015D08A1881024800040FF0201404100010003ABE
>0024400
>0008200D55588280101440001AAAAC0180000000003555560140010000806AAAAB024
>0000000
>0055555502800000000000000001999999999999990B0504158A00000003010303999
>9666666
>666666666666&coding=1
>
>But whenever I try to send any Picture Messages the http page will
>say sent
>but the message will arrive on my mobile phone as garbage.
>
>Can someone help me and give me some advice on how I can solve this
>problem
>?
>
>THANKS !!
>FREEMAN
>
>here is my kannel.conf file
>
># CORE CONFIGURATION
>
>group = core
>admin-port = 13000
>smsbox-port = 13001
>admin-password = bar
>log-file = "kannel.log"
>log-level = 0
># box-deny-ip = "*.*.*.*"
>box-allow-ip = "*.*.*.*"
>access-log = "access.log"
>store-file = "kannel.store"
>
>
># SMSC CONNECTIONS
>
>group = smsc
># smsc = at2
>smsc = at
>smsc-id = wavecom
>device = /dev/ttyS0
>modemtype = wavecom
>speed = 9600
># connect-allow-ip = "127.0.0.1"
>connect-allow-ip = "*.*.*.*"
>
>
>
># MODEM CONF
>
>group = modems
>id = wavecom
>name = Wavecom
>detect-string = "WAVECOM"
>speed = 9600
>
># SMSBOX SETUP
>
>group = smsbox
>bearerbox-host = localhost
>sendsms-port = 13013
>global-sender = 91234567
>log-file = "smsbox.log"
>log-level = 0
>access-log = "access.log"
>
>
># SEND-SMS USERS
>
>group = sendsms-user
>username = tester
>password = foobar
>max-messages = 10
>concatenation = true
>
>
># SERVICES
>
>group = sms-service
>keyword = default
>get-url =
>"http://198.198.1.150/sendsms.asp?from=%p&to=%P&text=%b&coding=%c";
>concatenation = true
>max-messages = 10