RE: dlr problem

hi.. many thanks for the feedback.

vendor implementation of protocols is always an issue. 

mike


-----Original Message-----
From: Stipe Tolj [mailto:[email protected]]
Sent: Friday, September 05, 2003 4:13 PM
To: DILWORTH MICHAEL
Cc: [email protected]
Subject: Re: dlr problem


Mike,

...
> 2003-09-03 14:10:18 [47] DEBUG: SMPP PDU 0x81bf0e0 dump:
> 2003-09-03 14:10:18 [47] DEBUG:   type_name: deliver_sm
> 2003-09-03 14:10:18 [47] DEBUG:   command_id: 5 = 0x00000005
> 2003-09-03 14:10:18 [47] DEBUG:   command_status: 0 = 0x00000000
> 2003-09-03 14:10:18 [47] DEBUG:   sequence_number: 1 = 0x00000001
> 2003-09-03 14:10:18 [47] DEBUG:   service_type: NULL
> 2003-09-03 14:10:18 [47] DEBUG:   source_addr_ton: 2 = 0x00000002
> 2003-09-03 14:10:18 [47] DEBUG:   source_addr_npi: 1 = 0x00000001
> 2003-09-03 14:10:18 [47] DEBUG:   source_addr: "693233xxxx"
> 2003-09-03 14:10:18 [47] DEBUG:   dest_addr_ton: 0 = 0x00000000
> 2003-09-03 14:10:18 [47] DEBUG:   dest_addr_npi: 1 = 0x00000001
> 2003-09-03 14:10:18 [47] DEBUG:   destination_addr: "1234"
> 2003-09-03 14:10:18 [47] DEBUG:   esm_class: 4 = 0x00000004
> 2003-09-03 14:10:18 [47] DEBUG:   protocol_id: 0 = 0x00000000
> 2003-09-03 14:10:18 [47] DEBUG:   priority_flag: 0 = 0x00000000
> 2003-09-03 14:10:18 [47] DEBUG:   schedule_delivery_time: NULL
> 2003-09-03 14:10:18 [47] DEBUG:   validity_period: NULL
> 2003-09-03 14:10:18 [47] DEBUG:   registered_delivery: 0 =
> 0x00000000
> 2003-09-03 14:10:18 [47] DEBUG:   replace_if_present_flag: 0 =
> 0x00000000
> 2003-09-03 14:10:18 [47] DEBUG:   data_coding: 0 = 0x00000000
> 2003-09-03 14:10:18 [47] DEBUG:   sm_default_msg_id: 0 = 0x00000000
> 2003-09-03 14:10:18 [47] DEBUG:   sm_length: 12 = 0x0000000c
> 2003-09-03 14:10:18 [47] DEBUG:   short_message: "00000003 201"
> 2003-09-03 14:10:18 [47] DEBUG: SMPP PDU dump ends.
> 2003-09-03 14:10:18 [47] DEBUG: SMPP[brite41] handle_pdu, got DLR
> 2003-09-03 14:10:18 [47] ERROR: SMPP[brite41]: got DLR but could not
> find message or was not interested in it

now the short_message field doesn't carry the required DLR information
as expected in  SMPP. That's why Kannel is unable to determine which
DLR this is.

IMO, the SMSC vendor does not act protocoll conform. Please talk to
them regarding this issue.

Stipe

[email protected]
-------------------------------------------------------------------
Wapme Systems AG

Vogelsanger Weg 80
40470 Düsseldorf

Tel: +49-211-74845-0
Fax: +49-211-74845-299

E-Mail: [email protected]
Internet: http://www.wapme-systems.de
-------------------------------------------------------------------
wapme.net - wherever you are