RE: dlr issue

Sorry guys,

I oversaw this, since I got frustrated by RTFMing this morning, but
thanks anyway.  

BR. Arnar
On Tue, 2004-03-09 at 11:47, Angel Fradejas wrote:
> Yes, there is, it is documented in the user-guide - I'll resist the
> temptation to say RTFM by now ;-)
> 
> Right from the user-guide:
> 
> 
> msg-id-type
> 	 
> Optional, specifies which number base the SMSC is using for the message ID
> numbers in the corresponding submit_sm_resp and deliver_sm PDUs. This is
> required to make delivery reports (DLR) work on SMSC that behave
> differently. The number is a combined set of bit 1 and bit 2 that indicate
> as follows: bit 1: type for submit_sm_resp, bit 2: type for deliver_sm. If
> the bit is set then the value is in hex otherwise in decimal number base.
> Which means the following combinations are possible and valid: 0x00
> deliver_sm decimal, submit_sm_resp decimal; 0x01 deliver_sm decimal,
> submit_sm_resp hex; 0x02 deliver_sm hex, submit_sm_resp decimal; 0x03
> deliver_sm hex, submit_sm_resp hex. In accordance to the SMPP v3.4 specs the
> default will be a C string literal if no of the above values is explicitly
> indicated using the config directive.
> 
> Angel FRADEJAS
> Mediafusión España, S.A.
> [email protected]
> www.mediafusion.es
> Tel. +34 91 252 3200
> Fax  +34 91 252 5969
> 
> 
> 
> -----Mensaje original-----
> De: [email protected] [mailto:[email protected]] En nombre de
> Arnar Gestsson
> Enviado el: martes, 09 de marzo de 2004 12:39
> Para: [email protected]
> Asunto: dlr issue
> 
> Hi guys,
> 
> 
> we are using Kannel 1.3.1 and connected to an SMPP SMSC, the funny thing
> is when we issue dlr request, the message id is stored in Kannel in hex
> format, but when the DLR arrives from the SMSC it comes on decimal
> format. Do you guys know about this and if there is a simple solution
> for it?
> 
> BR. Arnar
>