Re: Ericsson R520 -> CMS

Now I tried, but there is no difference.
Here is the log:
2004-08-31 14:24:02 [25007] [7] DEBUG: AT2[ttyS0]: --> AT+CNMI=3,2,0,0,0^M
2004-08-31 14:24:02 [25007] [7] DEBUG: AT2[ttyS0]: <-- OK
...
2004-08-31 14:29:27 [25007] [7] DEBUG: AT2[ttyS0]: <-- +CMT: 126
2004-08-31 14:29:28 [25007] [7] DEBUG: AT2[ttyS0]: <-- 
0791534850020200040C915348501075743900408013419222807AD47ABB1DA683F27CBA0B240DC3EBEAB21B144EAFC3611728C96E87E7F330E8ED06D1C3E97538EC0221D3EB779A5D07B1DF7078BDEE0215D96FF7FA2D57D7EBA0307B1D0EBB40D4FD9CBE47EFDDA079383D4F83E8E1F01C144EA3CB6537485D47B3D36E7A38ECFE81A8BA26
2004-08-31 14:29:28 [25007] [7] ERROR: AT2[ttyS0]: got +CMT but 
pdu_extract failed

Matti

Stipe Tolj wrote:

> Matti Ärmänen wrote:
>
>> Hello!
>> SonyEricsson GT-47 does not work either with AT+CNMI=3,2,0,0, but 
>> works with AT+CNMI=3,1,0,0
>> Here is the log:
>> 2004-08-30 13:31:44 [23220] [7] DEBUG: AT2[ttyS0]: --> AT+CNMI=3,2,0,0^M
>> 2004-08-30 13:31:45 [23220] [7] DEBUG: AT2[ttyS0]: <-- OK
>> 2004-08-30 13:31:45 [23220] [7] INFO: AT2[ttyS0]: AT SMSC 
>> successfully opened.
>> 2004-08-30 13:31:46 [23232] [9] DEBUG: Thread 9 
>> (gw/bb_boxc.c:function) maps to pid 23232.
>> 2004-08-30 13:31:46 [23232] [9] INFO: Client connected from <127.0.0.1>
>> 2004-08-30 13:31:46 [23232] [9] DEBUG: Started thread 10 
>> (gw/bb_boxc.c:boxc_sender)
>> 2004-08-30 13:31:46 [23234] [10] DEBUG: Thread 10 
>> (gw/bb_boxc.c:boxc_sender) maps to pid 23234.
>> 2004-08-30 13:31:46 [23219] [6] DEBUG: Started thread 9 
>> (gw/bb_boxc.c:function)
>> 2004-08-30 13:31:47 [23220] [7] DEBUG: AT2[ttyS0]: --> AT^M
>> 2004-08-30 13:31:47 [23220] [7] DEBUG: AT2[ttyS0]: <-- OK
>> 2004-08-30 13:33:49 [23220] [7] DEBUG: AT2[ttyS0]: --> AT^M
>> 2004-08-30 13:33:49 [23220] [7] DEBUG: AT2[ttyS0]: <-- OK
>> 2004-08-30 13:35:51 [23220] [7] DEBUG: AT2[ttyS0]: --> AT^M
>> 2004-08-30 13:35:51 [23220] [7] DEBUG: AT2[ttyS0]: <-- OK
>> 2004-08-30 13:35:51 [23220] [7] DEBUG: AT2[ttyS0]: <-- +CMT: 23
>> 2004-08-30 13:35:52 [23220] [7] DEBUG: AT2[ttyS0]: <-- 
>> 0791534850028200040C9153486503234600114080033153748004D4F29C0E
>> 2004-08-30 13:35:52 [23220] [7] ERROR: AT2[ttyS0]: got +CMT but 
>> pdu_extract failed
>
>
> thanks Matti for the information. Did you try "3,2,0,0,0" too (with 3 
> zeros)?
>
> There are still posts that complain that this should work.
>
> Stipe