Re: Unable to start bearerbox - serious error

The CVS version works so far... i could not get it to work with the -m32 gcc
flags

Thanks Again
--
M Amedeo Alaimo


On 12/8/05, M Amedeo Alaimo <[email protected]> wrote:
>
> Thank you very much Alex!
>
> On 12/8/05, Alexander Malysh <[email protected]> wrote:
> >
> > Hi,
> >
> > kannel still has some 64bit issues yet. Please either try cvs head and
> > report whether it works for you or compile with -m32 gcc flag.
> >
> > Thanks,
> > Alex
> >
> > M Amedeo Alaimo wrote:
> > > Hi,
> > >
> > > I have compiled kannel 1.4 on three machines, two of which we would
> > not
> > > like to use for testing ( the third we would like to use for testing
> > ).
> > > Each time the program was compiled the same compile time options were
> > used.
> > > All programs use the same configuration file.
> > > Two of the machines have this segmentation error.
> > >
> > > ../sbin/bearerbox -v 1 kannel.conf
> > > 2005-12-08 15:28:24 [8073] [0] INFO: Debug_lvl = 1, log_file = <none>,
> >
> > > log_lvl = 0
> > > 2005-12-08 15:28:24 [8073] [0] WARNING: DLR: using default 'internal'
> > > for storage type.
> > > 2005-12-08 15:28:24 [8073] [0] INFO: DLR using storage type: internal
> > > Segmentation fault
> > >
> > > Dec  8 15:28:19 massachusetts kernel: bearerbox[8072] general
> > protection
> > > rip:3afb06fd00 rsp:7fbfffec68 error:0
> > > Dec  8 15:28:24 massachusetts kernel: bearerbox[8073] general
> > protection
> > > rip:3afb06fd00 rsp:7fbfffec58 error:0
> > >
> > > The two machines that the program does not work on are using cent os
> > > linux  4.1 with kernels
> > > 2.6.9-11.ELsmp #1 SMP Wed Jun 8 16:59:12 CDT 2005 x86_64 x86_64 x86_64
> > > GNU/Linux
> > > and
> > > 2.6.9-22.0.1.106.unsupported #1 Sun Nov 6 09:30:38 CST 2005 x86_64
> > > x86_64 x86_64 GNU/Linux
> > >
> > > the machine that the program runs on is using cent os  4 with the
> > kernel
> > > 2.6.9-11.EL #1 Wed Jun 8 16:59:52 CDT 2005 i686 i686 i386 GNU/Linux
> > >
> > >
> > > Here is the configuration file
> > > # CORE
> > > group = core
> > > admin-port = 13000
> > > admin-password = 123456
> > > status-password = 123
> > > log-file = "/usr/local/kannel/log/kannel.log"
> > > log-level = 0
> > > access-log = "/usr/local/kannel/log/access.log"
> > > smsbox-port = 13001
> > > store-file = "/usr/local/kannel/log/kannel.store"
> > >
> > >
> > > # SMSC Fake
> > > group = smsc
> > > smsc = fake
> > > host = localhost
> > > port = 11000
> > >
> > > # SMSC Real
> > > #group = smsc
> > > #smsc = smpp
> > > #host = 123.123.123.123 <http://123.123.123.123>
> > > #port = 600
> > > #receive-port = 700
> > > #smsc-username = "STT"
> > > #smsc-password = foo
> > > #system-type = "VMA"
> > > #address-range = ""
> > >
> > > # SMSBOX SETUP
> > > group = smsbox
> > > bearerbox-host = localhost
> > > sendsms-port = 13002
> > > sendsms-chars = "0123456789+"
> > > log-file = "/usr/local/kannel/log/smsbox.log"
> > > log-level = 0
> > > access-log = "/usr/local/kannel/log/access.log"
> > > # SEND-SMS USERS
> > > group = sendsms-user
> > > username = playsms
> > > password = playsms
> > >
> > >
> > > # SMS SERVICE 'Default'
> > > # there should be default always
> > > group = sms-service
> > > keyword = default
> > > text = default
> > >
> > > group = sms-service
> > > keyword = notest
> > > text = testing
> > >
> > > I would greatly appreciate some input on this issue.
> > >
> > > Thanks
> > >
> > > --
> > > M Amedeo Alaimo
> >
> >
> >