Re: Malformed addr for Incoming short code

Monday 06 February 2006 13:18, skrev Stipe Tolj:
> Arne K. Haaje wrote:
> >> @Alex: is it enough to set 'dest-addr-ton', 'dest-addr-npi' inside
> >> smsc group to get rid of this. Or is the checking done before that and
> >> hence we baild out?
> >
> > Yes, if we could set it ourself that would help a lot. I am seeing this
> > now on connections to two different operators with the latest snapshots.
> > Running an old snapshot (before the data_sm patch I think) make the
> > problem go away
> >
> >> @Amol: you should contact your SMSC provider and let them now that
> >> their desination-ton for the shortcode is not right, they should send
> >> the appropriate TON value for network internal numbers (shortcode).
> >
> > I contacted on of the operators above regarding this, but they insisted
> > values were correct.  Thus, they were unwilling to change anything and I
> > had to downgrade to an older version
>
> so it does not helo in setting 'dest-add-ton' ?

No, it does not. I just tested, and here is the log;

2006-02-06 13:42:33 [781] [6] DEBUG: SMPP[T2_72320]: Got PDU:
2006-02-06 13:42:33 [781] [6] DEBUG: SMPP PDU 0x8252010 dump:
2006-02-06 13:42:33 [781] [6] DEBUG:   type_name: deliver_sm
2006-02-06 13:42:33 [781] [6] DEBUG:   command_id: 5 = 0x00000005
2006-02-06 13:42:33 [781] [6] DEBUG:   command_status: 0 = 0x00000000
2006-02-06 13:42:33 [781] [6] DEBUG:   sequence_number: 1872 = 0x00000750
2006-02-06 13:42:33 [781] [6] DEBUG:   service_type: NULL
2006-02-06 13:42:33 [781] [6] DEBUG:   source_addr_ton: 1 = 0x00000001
2006-02-06 13:42:33 [781] [6] DEBUG:   source_addr_npi: 1 = 0x00000001
2006-02-06 13:42:33 [781] [6] DEBUG:   source_addr: "467xxxxxxxx"
2006-02-06 13:42:33 [781] [6] DEBUG:   dest_addr_ton: 1 = 0x00000001
2006-02-06 13:42:33 [781] [6] DEBUG:   dest_addr_npi: 9 = 0x00000009
2006-02-06 13:42:33 [781] [6] DEBUG:   destination_addr: "72320"
2006-02-06 13:42:33 [781] [6] DEBUG:   esm_class: 0 = 0x00000000
2006-02-06 13:42:33 [781] [6] DEBUG:   protocol_id: 0 = 0x00000000
2006-02-06 13:42:33 [781] [6] DEBUG:   priority_flag: 0 = 0x00000000
2006-02-06 13:42:33 [781] [6] DEBUG:   schedule_delivery_time: NULL   
2006-02-06 13:42:33 [781] [6] DEBUG:   validity_period: NULL
2006-02-06 13:42:33 [781] [6] DEBUG:   registered_delivery: 0 = 0x00000000
2006-02-06 13:42:33 [781] [6] DEBUG:   replace_if_present_flag: 0 = 0x00000000
2006-02-06 13:42:33 [781] [6] DEBUG:   data_coding: 0 = 0x00000000
2006-02-06 13:42:33 [781] [6] DEBUG:   sm_default_msg_id: 0 = 0x00000000
2006-02-06 13:42:33 [781] [6] DEBUG:   sm_length: 11 = 0x0000000b
2006-02-06 13:42:33 [781] [6] DEBUG:   short_message: "DAWALL 1014"   
2006-02-06 13:42:33 [781] [6] DEBUG: SMPP PDU dump ends.
2006-02-06 13:42:33 [781] [6] ERROR: SMPP[T2_72320]: Mallformed addr `72320', 
expected at least 7 digits.

This is my SMSC group;

dest-addr-ton = 1
dest-addr-npi = 9


-- 
Yours sincerely,
Eurobate ASA

Arne K. Haaje
Senior Network Engineer
--------------------------------------------------------------------
    Eurobate ASA - Postboks 4589 Nydalen - 0404 Oslo - Norway
Phone: +47 23 22 73 73 - Fax: +47 23 22 73 74 - Mob: +47 92 88 44 66
                    http://www.eurobate.no/