Re: Weird Problem. Pls Help !

well I guess your best guess is then a Siemens TC35 modem settings
It works also for the MC35.
Note that hardware handshake is usually not an issue as modems tend  
to run at 19200 bps and your computer is usually able to keep up with  
that speed these days. Sending is also not too much of a problem  
because the driver has to wait on answers back from the modem.

group = modems
id = siemens_tc35
name = "Siemens TC35"
detect-string = "SIEMENS"
detect-string2 = "TC35"
init-string = "AT+CNMI=1,2,0,0,1"
speed = 19200
enable-hwhs = "AT\\Q3"
need-sleep = true

On 23.08.2006, at 09:00, Vaibhav Solanki wrote:

> Hi all,
>
> I have Falcom (Samba 55 USB ) GSM Modem.
> I get it connected to Kannel using following modem types:
>
> 1. falcom
> 2. wavecom
> 3. generic
>
> Now when i do "cu -l ttyUSB0 i get following details:
> # cu -l ttyUSB0
> Connected.
> ^SYSSTART
> ati
> SIEMENS
> MC55
> REVISION 03.03
>
> Please letmme know now what should i use for following parameters:
> init-string
> enable-hwhs
>
> Also which Modem type i should use.






Andreas Fink
Fink Consulting GmbH
---------------------------------------------------------------
Tel: +41-61-6666332 Fax: +41-61-6666331  Mobile: +41-79-2457333
Address: Clarastrasse 3, 4058 Basel, Switzerland
E-Mail:  [email protected]
Homepage: http://www.finkconsulting.com
---------------------------------------------------------------
ICQ: 8239353
MSN: [email protected] AIM: smsrelay Skype: andreasfink
Yahoo: finkconsulting SMS: +41792457333