Re: Destination address problem with 1.4.1

Ehizogie Binitie wrote:

> Hi ,
> I have two versions of Kannel . 1.4.0 and 1.4.1  on two different servers
> with exactly the same conf file. 
> When I run the server with 1.4.0 and text a keyword to a shortcode I don’t
> get an error. 
> 
> When I run the server with 1.4.1 and send the exact same message, I get
> feedback from the SMSC saying that 
> “ Your message could not be completed” 
> 
> Kannel logs indicate that the problem could be with the ton settings 
> 2006-11-10 06:43:01 [9216] [9] ERROR: SMPP[mySMSC]: Mallformed addr `XXX',
> expected at least 7 digits.
> 
> I have tried explicitly setting source-addr-autodetect to yes  but to no
> avail.
> Does anyone have an idea why this could be happening..?
> 
> 
> The logs are  shown below
> 
> 2006-11-10 06:42:58 [9216] [18] DEBUG: Dumping 0 messages to store
> 2006-11-10 06:42:58 [9216] [1] DEBUG: HTTP: Destroying HTTPClient area
> 0x8ed1a40.
> 2006-11-10 06:42:58 [9216] [1] DEBUG: HTTP: Destroying HTTPClient for
> `127.0.0.1'.
> 2006-11-10 06:42:59 [9216] [23] DEBUG: boxc_receiver: heartbeat with load
> value 0 received
> 2006-11-10 06:43:01 [9216] [9] DEBUG: SMPP[myBuzz]: Got PDU:
> 2006-11-10 06:43:01 [9216] [9] DEBUG: SMPP PDU 0x8ecd2a0 dump: 
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   type_name: deliver_sm
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   command_id: 5 = 0x00000005
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   command_status: 0 = 0x00000000
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   sequence_number: 30202211 =
> 0x01ccd963
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   service_type: "1001"               
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   source_addr_ton: 1 = 0x00000001
> 
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   source_addr_npi: 1 = 0x00000001
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   source_addr: "XXXXXXXXXXXX"      
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   dest_addr_ton: 1 = 0x00000001
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   dest_addr_npi: 1 = 0x00000001     
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   destination_addr: "XXX"       
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   esm_class: 0 = 0x00000000
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   protocol_id: 0 = 0x00000000
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   priority_flag: 0 = 0x00000000
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   schedule_delivery_time: NULL
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   validity_period: NULL
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   registered_delivery: 0 = 0x00000000
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   replace_if_present_flag: 0 =
> 0x00000000
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   data_coding: 242 = 0x000000f2
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   sm_default_msg_id: 0 = 0x00000000
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   sm_length: 2 = 0x00000002
> 2006-11-10 06:43:01 [9216] [9] DEBUG:   short_message: "in"
> 2006-11-10 06:43:01 [9216] [9] DEBUG: SMPP PDU dump ends.
> 2006-11-10 06:43:01 [9216] [9] ERROR: SMPP[mySMSC]: Mallformed addr `801',
> expected at least 7 digits.

this is correct... since it's "semantically illegal" to use a combination on 
TON=1 and addr value <7 digits. This would "mean", that there exist an 
international destination number with less then 7 digits, there is no such in 
real life.

This is obviously a internal network addr, so it should be using TON=0 for 
destination addr.

Stipe

-------------------------------------------------------------------
Kölner Landstrasse 419
40589 DĂĽsseldorf, NRW, Germany

tolj.org system architecture      Kannel Software Foundation (KSF)
http://www.tolj.org/              http://www.kannel.org/

mailto:st_{at}_tolj.org           mailto:stolj_{at}_kannel.org
-------------------------------------------------------------------