Re: Destination address problem with 1.4.1

Still, Kannel should "listen" to my config and set dest-addr-ton to 0.
Why doesn't this work? According to the PDU dump, it's still set to 1.
Am I missing something?

Thanks in advance.

Ehizogie Binitie wrote:

I don't think the patch is in CVS yet.

Ehi

Rancard Solutions Ltd.
web: www.rancardsolutions.com
email: [email protected]
mobile: +233.27.622.1212
office: +233.21.782.949

-----Original Message-----
From: Rolandow [ mailto:[email protected] ]
Sent: Monday, November 13, 2006 4:20 PM
To: 'Kannel Development list'
Subject: Re: Destination address problem with 1.4.1

Hi Stipe,

I just updated kannel through CVS, but I am still receiving errors. I
don't understand why this is happenig. This is my dump:

2006-11-13 17:12:53 [32590] [6] DEBUG: SMPP PDU 0x81b4a10 dump:
2006-11-13 17:12:53 [32590] [6] DEBUG: type_name: deliver_sm
2006-11-13 17:12:53 [32590] [6] DEBUG: command_id: 5 = 0x00000005
2006-11-13 17:12:53 [32590] [6] DEBUG: command_status: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG: sequence_number: 856949 =
0x000d1375
2006-11-13 17:12:53 [32590] [6] DEBUG: service_type: NULL
2006-11-13 17:12:53 [32590] [6] DEBUG: source_addr_ton: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG: source_addr_npi: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG: source_addr: "51198550378"
2006-11-13 17:12:53 [32590] [6] DEBUG: dest_addr_ton: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG: dest_addr_npi: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG: destination_addr: "8585"
2006-11-13 17:12:53 [32590] [6] DEBUG: esm_class: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG: protocol_id: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG: priority_flag: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG: schedule_delivery_time: NULL
2006-11-13 17:12:53 [32590] [6] DEBUG: validity_period: NULL
2006-11-13 17:12:53 [32590] [6] DEBUG: registered_delivery: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG: replace_if_present_flag: 0 =
0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG: data_coding: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG: sm_default_msg_id: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG: sm_length: 39 = 0x00000027
2006-11-13 17:12:53 [32590] [6] DEBUG: short_message:
2006-11-13 17:12:53 [32590] [6] DEBUG: Octet string at 0x81b4b58:
2006-11-13 17:12:53 [32590] [6] DEBUG: len: 39
2006-11-13 17:12:53 [32590] [6] DEBUG: size: 40
2006-11-13 17:12:53 [32590] [6] DEBUG: immutable: 0
2006-11-13 17:12:53 [32590] [6] DEBUG: data: 44 49 4d 45 20 4b 45
20 44 45 53 45 41 53 20 53 DIME KE DESEAS S
2006-11-13 17:12:53 [32590] [6] DEBUG: data: 41 42 45 52 20 44 45
20 4d 49 3f 54 45 20 45 53 ABER DE MI?TE ES
2006-11-13 17:12:53 [32590] [6] DEBUG: data: 50 45 52 4f 20 4f
4b PERO OK
2006-11-13 17:12:53 [32590] [6] DEBUG: Octet string dump ends.
2006-11-13 17:12:53 [32590] [6] DEBUG: SMPP PDU dump ends.
2006-11-13 17:12:53 [32590] [6] ERROR: SMPP[1]: Mallformed addr `8585',
expected at least 7 digits.

As you can see, the dest-addr-ton = 1 .. although I configured it like this:

# SMSC SMPP = SMS CENTER
# RX Movistar Peru
group = smsc
smsc = smpp
smsc-id = 1
denied-smsc-id = 1
host = 200.37.161.238
port = 5018
transceiver-mode = 1
smsc-username = "eMobBr_R"
smsc-password = "XXXX"
system-type = "ESME"
address-range = "9696"
my-number = 8585
dest-addr-ton = 0
dest-addr-npi = 1

I hope somebody can help me solving this issue. Also I still receive an
error instead of a warning?

Thanks in advance!

Kind regards,
Roland.

Stipe Tolj wrote:

Andreas Fink wrote:

this is correct... since it's "semantically illegal" to use a
combination on TON=1 and addr value <7 digits. This would "mean",
that there exist an international destination number with less then
7 digits, there is no such in real life.

Stipe, I have to disagree. Some countries might have short numbers
in the international format that way.

Think of +49112 as the international format of the emergecny code
112 in germany (+49). This would make 5 digits.
or +88234 as a country code which we own, we could easily make
+882345 as a pseudo international short ID with 6 digits.

I would make this a warning, not an error.

ok, sounds reasonable, even whie I'm not "sure" if a generic PLMN
shortcode (ie. 112 for emergency) can be dial from outside the home
network, hence using the country code prefix plus the shortcode. Can
you dial "+49112" from Switzerland? ;)

I'm +0 on this... so I'll change to a warning rather then error and
refusing the PDU.

Stipe

-------------------------------------------------------------------
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany

tolj.org system architecture Kannel Software Foundation (KSF)
http://www.tolj.org/ http://www.kannel.org/

mailto:st_{at }_tolj.org mailto:stolj_{at }_kannel.org
-------------------------------------------------------------------