Re: Kannel on Mac OSX

Hi,

please try attached hack and let us know what the panic is.

Alejandro Guerrieri wrote:

> So, I've recompiled with -g.
> 
> What I did (shell is "fish")
> 
> set CFLAGS "-g -O2"
> 
> ./configure
> make
> make install
> 
> During make, I've confirmed that the -g flag was being passed on the
> arguments like this:
> ...
> gcc -D_REENTRANT=1 -I. -Igw -g -O2 -DDARWIN=1
> -L/Developer/SDKs/MacOSX10.4u.sdk/usr/lib
> -I/Developer/SDKs/MacOSX10.4u.sdk/usr/include -I/usr/include/libxml2
> -o checks/check_date checks/check_date.o libgw.a libwmlscript.a
> libwap.a libgwlib.a -lresolv -lm  -lpthread -liconv -L/usr/lib -lxml2
> -lz -lpthread -liconv -lm
> ...
> But then on the gdb, the backtrace doesn't have any symbols either:
> 
>> gdb /usr/local/sbin/bearerbox /cores/core.14690
> GNU gdb 6.3.50-20050815 (Apple version gdb-563) (Wed Jul 19 05:10:58 GMT
> 2006) Copyright 2004 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and you
> are welcome to change it and/or distribute copies of it under certain
> conditions. Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB.  Type "show warranty" for
> details. This GDB was configured as "i386-apple-darwin"...Reading symbols
> for shared libraries ...... done
> 
> Core was generated by `/usr/local/sbin/bearerbox'.
> Core file contained no thread-specific data
> 
> (gdb) bt
> #0  0x00000000 in ?? ()
> 
> Am I missing something?
> 
> Regards,
> 
> Alejandro.
> On 4/23/07, Alejandro Guerrieri <[email protected]> wrote:
>> I've started with
>>
>> --with-pcre --enable-mysql
>>
>> but ended up with plain "./configure", it didn't make any differences
>> though.
>>
>> Are you using it on Intel or PPC platform? Mine's a MacBook Pro (Intel
>> 2.16 Ghz Core Duo with 2Gb RAM).
>>
>> I'll try adding the symbols and run gdb again.
>>
>> Regards,
>>
>> Alejandro.
>>
>> On 4/23/07, Andreas Fink <[email protected]> wrote:
>> > Alejandro, what ./configure line did you use?
>> > We use kannel without a problem under MacOS X...
>> > I would recommend to build it with debug symbols (add -g to the
>> > compiler flags).
>> >
>> >
>> >
>> >
>> > On 21.04.2007, at 19:53, Alejandro Guerrieri wrote:
>> >
>> > Hi,
>> >
>> > I've been struggling to get Kannel running on Mac OSX Tiger 10.4.9 on
>> > a MacBook Pro (Intel architecture) to no avail.
>> >
>> > Kannel compiles fine, but when run it segfaults.
>> >
>> > gdb output is rather poor:
>> >
>> > #0  0x00000000 in ?? ()
>> >
>> > CrashReporter log is as follows:
>> >
>> > **********
>> >
>> > Host Name:      silverbook
>> > Date/Time:      2007-04-21 12:01:00.689 -0300
>> > OS Version:     10.4.9 (Build 8P2137)
>> > Report Version: 4
>> >
>> > Command: bearerbox
>> > Path:    /usr/local/sbin/bearerbox
>> > Parent:  bash [9999]
>> >
>> > Version: ??? (???)
>> >
>> > PID:    18746
>> > Thread: 0
>> >
>> > Exception:  EXC_BAD_ACCESS (0x0001)
>> > Codes:      KERN_INVALID_ADDRESS (0x0001) at 0xbf7ffd7c
>> >
>> > Thread 0 Crashed:
>> > 0   libSystem.B.dylib 0x9000b10d __vfprintf + 12
>> > 1   libSystem.B.dylib 0x9000b0f0 sprintf + 480
>> > 2   bearerbox         0x00080160 format + 650 (log.c:386)
>> > 3   bearerbox         0x000802e3 gw_panic + 72 (log.c:527)
>> > 4   bearerbox         0x00075611 gw_rwlock_rdlock + 52
>> > (gw-rwlock.c:152)
>> > 5   bearerbox         0x000802f7 gw_panic + 92 (log.c:527)
>> > 6   bearerbox         0x00075611 gw_rwlock_rdlock + 52
>> > (gw-rwlock.c:152)
>> > 7   bearerbox         0x000802f7 gw_panic + 92 (log.c:527)
>> > 8   bearerbox         0x00075611 gw_rwlock_rdlock + 52
>> > (gw-rwlock.c:152)
>> > 9   bearerbox         0x000802f7 gw_panic + 92 (log.c:527)
>> > 10  bearerbox         0x00075611 gw_rwlock_rdlock + 52
>> > (gw-rwlock.c:152) ...
>> > (Repeats the same two lines)
>> > ...
>> >
>> > 505 bearerbox         0x000802f7 gw_panic + 92 (log.c:527)
>> > 506 bearerbox         0x00075611 gw_rwlock_rdlock + 52
>> > (gw-rwlock.c:152)
>> > 507 bearerbox         0x000802f7 gw_panic + 92 (log.c:527)
>> > 508 bearerbox         0x00075611 gw_rwlock_rdlock + 52
>> > (gw-rwlock.c:152)
>> >
>> > Thread 0 crashed with X86 Thread State (32-bit):
>> >  eax: 0xbf8005b4  ebx: 0x9000af20  ecx: 0x00000000  edx: 0xa00023e0
>> >  edi: 0x0000000c  esi: 0xbf800628  ebp: 0xbf8004d8  esp: 0xbf7ffd80
>> >   ss: 0x0000001f  efl: 0x00010282  eip: 0x9000b10d   cs: 0x00000017
>> >   ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000037
>> >
>> > Binary Images Description:
>> >    0x1000 -    0xa6fff bearerbox /usr/local/sbin/bearerbox
>> > 0x8fe00000 - 0x8fe4afff dyld 46.12 /usr/lib/dyld
>> > 0x90000000 - 0x90172fff libSystem.B.dylib /usr/lib/libSystem.B.dylib
>> > 0x901c2000 - 0x901c4fff libmathCommon.A.dylib
>> >  /usr/lib/system/libmathCommon.A.dylib
>> > 0x90bd2000 - 0x90bd9fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
>> > 0x91157000 - 0x91165fff libz.1.dylib /usr/lib/libz.1.dylib
>> > 0x91946000 - 0x919f8fff libcrypto.0.9.7.dylib
>> > /usr/lib/libcrypto.0.9.7.dylib 0x91be1000 - 0x91cbffff libxml2.2.dylib
>> > /usr/lib/libxml2.2.dylib 0x92627000 - 0x92714fff libiconv.2.dylib
>> > /usr/lib/libiconv.2.dylib 0x9496d000 - 0x94992fff libssl.0.9.7.dylib
>> > /usr/lib/libssl.0.9.7.dylib 0x9499e000 - 0x949bbfff libresolv.9.dylib
>> > /usr/lib/libresolv.9.dylib
>> >
>> > If anyone have a clue about what's wrong, it will be more than welcome
>> > ;)
>> >
>> > Thank you in advance
>> > --
>> > Alejandro Guerrieri
>> > Magicom
>> > http://www.magicom-bcn.net/
>> > LinkedIn: http://www.linkedin.com/in/aguerrieri
>> >
>> >
>> > Andreas Fink
>> >
>> > Fink Consulting GmbH
>> > Global Networks Schweiz AG
>> > BebbiCell AG
>> >
>> > ---------------------------------------------------------------
>> > Tel: +41-61-6666330 Fax: +41-61-6666331  Mobile: +41-79-2457333
>> > Address: Clarastrasse 3, 4058 Basel, Switzerland
>> > E-Mail:  [email protected]
>> > www.finkconsulting.com www.global-networks.ch www.bebbicell.ch
>> > ---------------------------------------------------------------
>> > ICQ: 8239353 MSN: [email protected] AIM: smsrelay Skype: andreasfink
>> > Yahoo: finkconsulting SMS: +41792457333
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>> --
>> Alejandro Guerrieri
>> Magicom
>> http://www.magicom-bcn.net/
>> LinkedIn: http://www.linkedin.com/in/aguerrieri
>>
> 
> 

-- 
Thanks,
Alex

=== gwlib/log.c
==================================================================
--- gwlib/log.c	(revision 282)
+++ gwlib/log.c	(local)
@@ -520,11 +520,32 @@
 
 void gw_panic(int err, const char *fmt, ...)
 {
+    int i;
+    char buf[FORMAT_SIZE];
+    va_list args;
+    int level = GW_PANIC;
+    char *place = "";
+
     /*
      * we don't want PANICs to spread accross smsc logs, so
      * this will be always within the main core log.
      */
-    FUNCTION_GUTS(GW_PANIC, "");
+    format(buf, level, "", err, fmt, 1);
+    for (i = 0; i < num_logfiles; ++i) {
+	if (logfiles[i].exclusive == GW_NON_EXCL &&
+            level >= logfiles[i].minimum_output_level &&
+            logfiles[i].file != NULL) {
+            va_start(args, fmt);
+            output(logfiles[i].file, buf, args);
+            va_end(args);
+	}
+    }
+    if (dosyslog) {
+        format(buf, level, place, err, fmt, 0);
+	va_start(args, fmt);
+	kannel_syslog(buf,args,level);
+	va_end(args);
+    }
 
 #ifdef HAVE_BACKTRACE
     {