Re: Segfault in Kannel meta-data (TLV) branch with certain DLR
Giulio Harding <[email protected]>
| Newsgroups | gmane.comp.mobile.kannel.devel |
|---|---|
| Message-ID | <[email protected]> |
Also, it looks like there's 2 instances of the same typo, one at
1396, the other at 1460
the 2nd instance at line 1460, should it be something like this?
...
if (dlrmsg != NULL) {
if (dlrmsg->sms.meta_data == NULL)
dlrmsg->sms.meta_data = octstr_create("");
meta_data_set_values(dlrmsg->sms.meta_data, pdu-
>u.deliver_sm.tlv, "smpp");
}
...
On 22/01/2008, at 1:32 AM, Kyriacos Sakkas wrote:
> Hi,
> There is some umbiquity in the patch. The new lines are inserted
> lower from where the old lines are removed, and specificaly after
> an IF
> statement that would negate this code block:
> if (dlrmsg != NULL) {
> + if (dlrmsg->sms.meta_data == NULL)
>
> This looks like an error in the diff output.
>
> Kyriacos
>
> Alexander Malysh wrote:
>> Hi,
>>
>> thanks for very good bug report. Please try attached patch that
>> should fix:
>> 1) typo ; 2) the case if dlr is not found in the storage.
>>
>> Just apply it to smpp-tlv branch.
>>
>> Giulio Harding wrote:
>>
>>
>>> Ok, after a bit more perusing of the code, I think I found the
>>> problem (line 1460 of gw/smsc/smsc_smpp.c):
>>>
>>> ...
>>> /* got a deliver ack (DLR)?
>>> * NOTE: following SMPP v3.4. spec. we are
>>> interested
>>> * only on bits 2-5 (some SMSC's send 0x44,
>>> and it's
>>> * spec. conforme)
>>> */
>>> if (pdu->u.deliver_sm.esm_class & (0x04|0x08)) {
>>>
>>> debug("bb.sms.smpp",0,"SMPP[%s] handle_pdu, got
>>> DLR",
>>> octstr_get_cstr(smpp->conn->id));
>>>
>>> dlrmsg = handle_dlr(smpp, pdu-
>>>> u.deliver_sm.source_addr, pdu->u.deliver_sm.short_message, pdu-
>>>> u.deliver_sm.message_payload,
>>> pdu-
>>>> u.deliver_sm.receipted_message_id, pdu-
>>>> >u.deliver_sm.message_state);
>>> if (dlrmsg->sms.meta_data == NULL)
>>> dlrmsg->sms.meta_data = octstr_create("");
>>> meta_data_set_values(msg->sms.meta_data, pdu-
>>>> u.deliver_sm.tlv, "smpp"); /* <----------------------- should be
>>> 'dlrmsg->sms.meta_data' */
>>> resp = smpp_pdu_create(deliver_sm_resp,
>>> pdu->u.deliver_sm.sequence_number);
>>> if (dlrmsg != NULL)
>>> reason = bb_smscconn_receive(smpp->conn,
>>> dlrmsg);
>>> else
>>> reason = SMSCCONN_SUCCESS;
>>> resp->u.deliver_sm_resp.command_status =
>>> smscconn_failure_reason_to_smpp_status(reason);
>>> } else {/* MO-SMS */
>>> ...
>>>
>>>
>>> I've changed that line (replaced 'msg' with 'dlrmsg') and rebuilt
>>> Kannel - it seems to be working fine so far, but I'll need some more
>>> traffic to know for sure (it's late here, so traffic has dropped off
>>> a bit)
>>>
>>> Can someone confirm this problem + fix?
>>>
>>> Thanks,
>>>
>>> On 21/01/2008, at 11:57 PM, Giulio Harding wrote:
>>>
>>>
>>>> I've been testing Alex's TLV patch with the meta-data branch, with
>>>> initial success (able to read and set mblox TLVs for US-specific
>>>> bind, as per Kyriacos's mblox TLV config - thanks for that!). It's
>>>> been performing perfectly on our test server, with a small number
>>>> of test binds, carrying test traffic.
>>>>
>>>> However, when I decided to try deploying that build to production,
>>>> bearerbox would crash shortly after startup (after varying delay,
>>>> sometimes 1 second, sometimes 10 or so). It would segfault, with no
>>>> indication in bearer.log (just a 'Connection closed by the
>>>> bearerbox' in smsbox.log) - the only indication was in /var/log/
>>>> messages, for example:
>>>>
>>>> Jan 21 23:46:27 smsgw2 kernel: bearerbox[10180]: segfault at
>>>> 0000000000000118 rip 000000000044c229 rsp 000000005ea30060 error 4
>>>>
>>>> I initially thought it might be a 32-bit/64-bit thing (test server
>>>> is 32-bit, production is 64-bit), but I couldn't reproduce the
>>>> problem on another 64-bit machine, and recompiling with gcc4 didn't
>>>> help. (gcc 3.4 apparently can produce incorrect instructions on 64-
>>>> bit machines in some rare cases??) Turning on debug logging didn't
>>>> show anything useful either.
>>>>
>>>> I recompiled kannel with --with-defaults=debug, and tried attaching
>>>> gdb to bearerbox to see if I could get anything useful when it
>>>> segfaulted - here's the output from gdb:
>>>>
>>>> ...
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: SMPP[optusfrmt]: Got PDU:
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: SMPP PDU 0x6bcff60 dump:
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: type_name: deliver_sm
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: command_id: 5 =
>>>> 0x00000005
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: command_status: 0 =
>>>> 0x00000000
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: sequence_number: 1 =
>>>> 0x00000001
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: service_type: "NOREP"
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: source_addr_ton: 1 =
>>>> 0x00000001
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: source_addr_npi: 1 =
>>>> 0x00000001
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: source_addr: "XXXX"
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: dest_addr_ton: 2 =
>>>> 0x00000002
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: dest_addr_npi: 8 =
>>>> 0x00000008
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: destination_addr:
>>>> "19774777"
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: esm_class: 4 = 0x00000004
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: protocol_id: 0 =
>>>> 0x00000000
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: priority_flag: 0 =
>>>> 0x00000000
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG:
>>>> schedule_delivery_time: NULL
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: validity_period: NULL
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: registered_delivery: 0 =
>>>> 0x00000000
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: replace_if_present_flag:
>>>> 0 = 0x00000000
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: data_coding: 0 =
>>>> 0x00000000
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: sm_default_msg_id: 0 =
>>>> 0x00000000
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: sm_length: 122 =
>>>> 0x0000007a
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: short_message:
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: Octet string at
>>>> 0x6be5f30:
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: len: 122
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: size: 123
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: immutable: 0
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: data: 69 64 3a 31 34
>>>> 32 37 31 35 39 33 37 36 20 73 75 id:1427159376 su
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: data: 62 3a 30 30 31
>>>> 20 64 6c 76 72 64 3a 30 30 31 20 b:001 dlvrd:001
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: data: 73 75 62 6d 69
>>>> 74 20 64 61 74 65 3a 30 38 30 31 submit date:0801
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: data: 32 31 32 33 35
>>>> 39 20 64 6f 6e 65 20 64 61 74 65 212359 done date
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: data: 3a 30 38 30 31
>>>> 32 31 32 33 35 39 20 73 74 61 74 :0801212359 stat
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: data: 3a 44 45 4c 49
>>>> 56 52 44 20 65 72 72 3a 30 30 30 :DELIVRD err:000
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: data: 20 74 65 78 74
>>>> 3a 43 68 20 37 3a 20 54 68 6e 78 text:Ch 7: Thnx
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: data: 20 34 20 65 6e
>>>> 74 65 72 69 6e 4 enterin
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: Octet string dump ends.
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: SMPP PDU dump ends.
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: SMPP[optusfrmt] handle_pdu,
>>>> got DLR
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: DLR[pgsql]: Looking for DLR
>>>> smsc=optusfrmt, ts=1427159376, dst=XXXX, type=1
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: sql: SELECT mask, service,
>>>> url, source, destination, boxc FROM dlr WHERE smsc='optusfrmt' AND
>>>> ts='1427159376' LIMIT 1;
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: Found entry, col1=31,
>>>> col2=apg, col3=http://apg:8888/dlr/kannel?i=44921898&t=%T&c=%d&m=%
>>>> A, col4=19774777, col5=XXXX col6=
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: DLR[pgsql]: created DLR
>>>> message for URL <http://apg:8888/dlr/kannel?i=44921898&t=%T&c=%
>>>> d&m=%A>
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: removing DLR from database
>>>> 2008-01-21 23:59:28 [18588] [49] DEBUG: sql: DELETE FROM dlr WHERE
>>>> smsc='optusfrmt' AND ts='1427159376';
>>>>
>>>> Program received signal SIGSEGV, Segmentation fault.
>>>> [Switching to Thread 1577253216 (LWP 18639)]
>>>> 0x000000000044ebc1 in handle_pdu (smpp=0x2a95c0e3d0,
>>>> conn=0x6b4f8c0,
>>>> pdu=0x6bcff60, pending_submits=0x5e02f0f0) at gw/smsc/
>>>> smsc_smpp.c:1460
>>>> 1460 meta_data_set_values(msg->sms.meta_data,
>>>> pdu->u.deliver_sm.tlv, "smpp");
>>>>
>>>>
>>>> So, it seems the segfault is triggered by TLV handling for a
>>>> certain kind of DLR? (We had DLRs coming in on our test binds, and
>>>> that didn't cause a problem). I'm a complete GDB noob, so if
>>>> there's anything else I can do to provide more information, please
>>>> let me know.
>>>>
>>>> Any ideas why that meta_data_set_value function call would die with
>>>> that DLR? Any assistance would be greatly appreciated!
>>>>
>>>> FYI, Kannel details are:
>>>>
>>>> Kannel bearerbox version `cvs-20071018'. Build `Jan 21 2008
>>>> 23:52:11', compiler `3.4.6 20060404 (Red Hat 3.4.6-9)'. System
>>>> Linux, release 2.6.9-55.0.2.ELsmp, version #1 SMP Tue Jun 26
>>>> 14:14:47 EDT 2007, machine x86_64. Hostname
>>>> smsgw2.appgw.mnetcorporation.com, IP 10.110.123.31. Libxml version
>>>> 2.6.16. Using checking malloc.
>>>>
>>>> Thanks,
>>>>
>>>> --
>>>> Giulio Harding
>>>> Systems Administrator
>>>>
>>>> m.Net Corporation
>>>> Level 2, 8 Leigh Street
>>>> Adelaide SA 5000, Australia
>>>>
>>>> Tel: +61 8 8210 2041
>>>> Fax: +61 8 8211 9620
>>>> Mobile: 0432 876 733
>>>> Yahoo: giulio.harding
>>>> MSN: [email protected]
>>>>
>>>> http://www.mnetcorporation.com
>>>>
>>>>
>>>>
>>>>
>>> --
>>> Giulio Harding
>>> Systems Administrator
>>>
>>> m.Net Corporation
>>> Level 2, 8 Leigh Street
>>> Adelaide SA 5000, Australia
>>>
>>> Tel: +61 8 8210 2041
>>> Fax: +61 8 8211 9620
>>> Mobile: 0432 876 733
>>> Yahoo: giulio.harding
>>> MSN: [email protected]
>>>
>>> http://www.mnetcorporation.com
>>>
>>
>>
>
>
> --
> Kyriacos Sakkas
> Development Team
> Netsmart
> Tel: + 357 22 452565
> Fax: + 357 22 452566
> Email: [email protected]
> http://www.netsmart.com.cy
>
> Taking Business to a New Level!
>
> ** Confidentiality Notice: The information contained in this email
> message may be privileged, confidential and protected from disclosure.
> If you are not the intended recipient, any dissemination,
> distribution,
> or copying of this email message is strictly prohibited.
> If you think that you have received this email message in error,
> please
> email the sender at [email protected] **
>
>
--
Giulio Harding
Systems Administrator
m.Net Corporation
Level 2, 8 Leigh Street
Adelaide SA 5000, Australia
Tel: +61 8 8210 2041
Fax: +61 8 8211 9620
Mobile: 0432 876 733
Yahoo: giulio.harding
MSN: [email protected]
http://www.mnetcorporation.com