Maestro 100 Problem while Maestro 20 Working

Hi,

I am getting a generic ERROR while sending messages. My logs and conf's
are described below.

Modem: Maestro 100
Kannel: RPM Version 1.4.1
OS: Fedora Core 5

The same works flawlessly with Maestro 20.

Conf
====
#SMSC GSM Fargo Maestro 100 Modem
group = smsc
smsc = at
smsc-id = GSM
modemtype = WAVECOM
device = /dev/ttyS0
validityperiod = 167
speed = 9600
my-number = +9198XXXXXXXX
sms-center = +919811009998
keepalive = 60
sim-buffering = true

# Fargo Maestro 20 900/1800 GSM Modem (Working)
#group = modems
#id = wavecom
#name = "Fargo Maestro 20"
#detect-string = "WAVECOM"
#need-sleep = true
#keepalive-cmd = "AT+CBC;+CSQ"
#enable-mms = false
#speed = 9600

# Maestro 100 900/1800 GSM Modem (Not Working)
group = modems
id = wavecom
name = "Maestro 100 Lite"
detect-string = "WAVECOM"
need-sleep = true
keepalive-cmd = "AT+CBC;+CSQ"
enable-mms = false
speed = 9600

Logs
====
2008-03-03 15:27:10 [8740] [0] INFO: Kannel bearerbox II version 1.4.1
starting
2008-03-03 15:27:10 [8740] [0] INFO: MAIN: Start-up done, entering
mainloop
2008-03-03 15:27:10 [8740] [0] DEBUG: AT2[GSM]: start called
2008-03-03 15:27:10 [8740] [6] DEBUG: AT2[GSM]: device opened
2008-03-03 15:27:10 [8740] [7] DEBUG: sms_router: gwlist_len = 0
2008-03-03 15:27:10 [8740] [12] DEBUG: Thread 12
(gw/bearerbox.c:wdp_router) maps to pid 8740.
2008-03-03 15:27:10 [8740] [12] DEBUG: udp_die: removing producers from
udp-lists
2008-03-03 15:27:10 [8740] [12] DEBUG: Thread 12
(gw/bearerbox.c:wdp_router) terminates.
2008-03-03 15:27:11 [8740] [6] DEBUG: AT2[GSM]: device opened
2008-03-03 15:27:11 [8740] [6] INFO: AT2[GSM]: speed set to 9600
2008-03-03 15:27:11 [8740] [6] DEBUG: AT2[GSM]: --> ^M
2008-03-03 15:27:13 [8740] [6] DEBUG: AT2[GSM]: --> AT^M
2008-03-03 15:27:13 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:13 [8740] [6] DEBUG: AT2[GSM]: --> AT&F^M
2008-03-03 15:27:13 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:13 [8740] [6] DEBUG: AT2[GSM]: --> ATE0^M
2008-03-03 15:27:13 [8740] [5] INFO: Client connected from <127.0.0.1> 
2008-03-03 15:27:13 [8740] [5] DEBUG: Started thread 13
(gw/bb_boxc.c:function)
2008-03-03 15:27:13 [8740] [13] DEBUG: Thread 13 (gw/bb_boxc.c:function)
maps to pid 8740.
2008-03-03 15:27:13 [8740] [13] DEBUG: Started thread 14
(gw/bb_boxc.c:boxc_sender)
2008-03-03 15:27:13 [8740] [14] DEBUG: Thread 14
(gw/bb_boxc.c:boxc_sender) maps to pid 8740.
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: --> ATI^M
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: <-- WAVECOM MODEM
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: <-- MULTIBAND  900E
1800
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: found string <WAVECOM>,
using modem definition <Maestro 100 Lite>
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: --> AT+CSMS=?^M
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: <-- +CSMS: (0,1)
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:14 [8740] [6] INFO: AT2[GSM]: Phase 2+ is supported
2008-03-03 15:27:14 [8740] [6] INFO: AT2[GSM]: closing device
2008-03-03 15:27:14 [8740] [6] INFO: AT2[GSM]: opening device
2008-03-03 15:27:14 [8740] [6] DEBUG: AT2[GSM]: device opened
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: device opened
2008-03-03 15:27:15 [8740] [6] INFO: AT2[GSM]: init device
2008-03-03 15:27:15 [8740] [6] INFO: AT2[GSM]: speed set to 9600
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: --> ATZ^M
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: --> AT^M
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: <-- AT
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: --> AT&F^M
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: <-- AT&F
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:15 [8740] [6] DEBUG: AT2[GSM]: --> ATE0^M
2008-03-03 15:27:16 [8740] [6] DEBUG: AT2[GSM]: <-- ATE0
2008-03-03 15:27:16 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:16 [8740] [6] DEBUG: AT2[GSM]: --> AT+IFC=2,2^M
2008-03-03 15:27:16 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:16 [8740] [6] DEBUG: AT2[GSM]: --> AT+CPIN?^M
2008-03-03 15:27:16 [8740] [6] DEBUG: AT2[GSM]: <-- +CPIN: READY
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: --> AT
+CSCA="+919811009998"^M
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: --> AT+CMGF=0^M
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: --> AT+CSMS=?^M
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: <-- +CSMS: (0,1)
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:27 [8740] [6] INFO: AT2[GSM]: Phase 2+ is supported
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: --> AT+CSMS=1^M
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: <-- +CSMS: 1,1,1
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: --> AT+CNMI=1,2,0,1,0^M
2008-03-03 15:27:27 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:27 [8740] [6] INFO: AT2[GSM]: AT SMSC successfully
opened.
2008-03-03 15:27:29 [8740] [6] DEBUG: AT2[GSM]: --> AT+CBC;+CSQ^M
2008-03-03 15:27:29 [8740] [6] DEBUG: AT2[GSM]: <-- +CBC: 0,0
2008-03-03 15:27:29 [8740] [6] DEBUG: AT2[GSM]: <-- +CSQ: 31,0
2008-03-03 15:27:29 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:27:29 [8740] [6] DEBUG: AT2[GSM]: --> AT+CPMS?^M
2008-03-03 15:27:29 [8740] [6] DEBUG: AT2[GSM]: <-- +CPMS:
"SM",0,17,"SM",0,17,"SM",0,17
2008-03-03 15:27:29 [8740] [6] DEBUG: AT2[GSM]: <-- OK
2008-03-03 15:28:12 [8740] [13] DEBUG: boxc_receiver: sms received
2008-03-03 15:28:12 [8740] [13] DEBUG: send_msg: sending msg to box:
<127.0.0.1>
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: TP-Validity-Period: 24.0
hours
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: --> AT+CMGS=20^M
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: <-- >
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: send command status: 1
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: -->
0011000C911989012547840000A706F4F29C0E9A01
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: --> ^Z
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: <-- >
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: <-- ERROR
2008-03-03 15:28:13 [8740] [6] ERROR: AT2[GSM]: Generic error: ERROR
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: send command status: -1
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: --> AT+CMGS=20^M
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: <-- >
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: send command status: 1
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: -->
0011000C911989012547840000A706F4F29C0E9A01
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: --> ^Z
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: <-- >
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: <-- ERROR
2008-03-03 15:28:13 [8740] [6] ERROR: AT2[GSM]: Generic error: ERROR
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: send command status: -1
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: --> AT+CMGS=20^M
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: <-- >
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: send command status: 1
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: -->
0011000C911989012547840000A706F4F29C0E9A01
2008-03-03 15:28:13 [8740] [6] DEBUG: AT2[GSM]: --> ^Z
2008-03-03 15:28:14 [8740] [6] DEBUG: AT2[GSM]: <-- >
2008-03-03 15:28:14 [8740] [6] DEBUG: AT2[GSM]: <-- ERROR
2008-03-03 15:28:14 [8740] [6] ERROR: AT2[GSM]: Generic error: ERROR
2008-03-03 15:28:14 [8740] [6] DEBUG: AT2[GSM]: send command status: -1

As you can see it binds to the modem successfully but cannot send. The
SIM has been tested on Maestro 20 and also on a phone. I have also
changed settings for speed to auto detect(0).

Any Help is greatly appreciated. Please point me to TFM where I can
proceed. Thanks

Shiv