Re: Configuring multiple Transmitter on 1 port

Please address all configuration questions to users list. This is not the appropriate forum for this.

BR,
Nikos
  ----- Original Message ----- 
  From: Chaitanya Bhatt // Viva 
  To: [email protected] 
  Sent: Monday, December 29, 2008 2:06 PM
  Subject: Configuring multiple Transmitter on 1 port


  Hi

  My smpp provider has given me one smpp username,password & 2 ports, and told to use 3  binds as transmitter on port1, 3  binds as transmitter on port2, 1 bind as receiver on port2 to get good throughput.
  But i don't know how to configure multiple binds on single port?
  However i have configured this as follow:-

  Please let me know whether i had configured correct or not?


  group = smsc
  smsc = smpp
  smsc-id = smscid
  host=xxx.xxx.xxx.xxx
  smsc-username= smscid
  smsc-password=xxxx
  port = port1
  receive-port=port2
  connect-allow-ip = 127.0.0.1
  system-type="" 
  address-range="" 
  source-addr-ton=1 
  source-addr-npi=1  
  dest-addr-ton=1 
  dest-addr-npi=1
  reroute-dlr=1

  group = smsc
  smsc = smpp
  smsc-id = smscid
  host=xxx.xxx.xxx.xxx
  smsc-username= smscid
  smsc-password=xxxx
  port = port1
  receive-port=port2
  connect-allow-ip = 127.0.0.1
  system-type="" 
  address-range="" 
  source-addr-ton=1 
  source-addr-npi=1  
  dest-addr-ton=1 
  dest-addr-npi=1
  reroute-dlr=1

  group = smsc
  smsc = smpp
  smsc-id = smscid
  host=xxx.xxx.xxx.xxx
  smsc-username= smscid
  smsc-password=xxxx
  port = port1
  receive-port=port2
  connect-allow-ip = 127.0.0.1
  system-type="" 
  address-range="" 
  source-addr-ton=1 
  source-addr-npi=1  
  dest-addr-ton=1 
  dest-addr-npi=1
  reroute-dlr=1

  group = smsc
  smsc = smpp
  smsc-id = smscid
  host=xxx.xxx.xxx.xxx
  smsc-username= smscid
  smsc-password=xxxx
  port = port2
  receive-port=port2
  connect-allow-ip = 127.0.0.1
  system-type="" 
  address-range="" 
  source-addr-ton=1 
  source-addr-npi=1  
  dest-addr-ton=1 
  dest-addr-npi=1
  reroute-dlr=1

  group = smsc
  smsc = smpp
  smsc-id = smscid
  host=xxx.xxx.xxx.xxx
  smsc-username= smscid
  smsc-password=xxxxx
  port =port2
  receive-port=port2
  connect-allow-ip = 127.0.0.1
  system-type="" 
  address-range="" 
  source-addr-ton=1 
  source-addr-npi=1  
  dest-addr-ton=1 
  dest-addr-npi=1
  reroute-dlr=1

  group = smsc
  smsc = smpp
  smsc-id = smscid
  host=xxx.xxx.xxx.xxx
  smsc-username= smscid
  smsc-password=xxxx
  port = port2
  receive-port=port2
  connect-allow-ip = 127.0.0.1
  system-type="" 
  address-range="" 
  source-addr-ton=1 
  source-addr-npi=1  
  dest-addr-ton=1 
  dest-addr-npi=1
  reroute-dlr=1

  group = smsc
  smsc = smpp
  smsc-id = smscid
  host=xxx.xxx.xxx.xxx
  smsc-username= smscid
  smsc-password=xxxx
  receive-port=port2
  connect-allow-ip = 127.0.0.1
  system-type="" 
  address-range="" 
  source-addr-ton=1 
  source-addr-npi=1  
  dest-addr-ton=1 
  dest-addr-npi=1

  -- 
  Thanks & Regards
  Chaitanya Bhatt