Re: [PATCH] smsc_at2.c error string

No this is currently uppon approval to be on CVS.
You can freely give your opignon though ;)

Vincent.


Alvaro Cornejo a écrit :
> Hi Vincent
> 
> Is that in the latest CVS?
> 
> I got this as error string:
> 
> 
> cat /var/log/kannel/x1p7_movimx2.log |grep -i error |more
> 
> 2009-06-18 06:08:41 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
> no network service
> 2009-06-18 06:08:41 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
> ERROR: no network service
> ...
> 
> 2009-06-18 21:16:59 [29762] [13] DEBUG: AT2[movimx1]: <-- +CMS ERROR: congestion
> 2009-06-18 21:16:59 [29762] [13] ERROR: AT2[movimx1]: CMS ERROR: +CMS
> ERROR: congestion
> ...
> 
> 2009-06-18 07:28:05 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
> unassigned (unallocated) number
> 2009-06-18 07:28:05 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
> ERROR: unassigned (unallocated)
> number
> 2009-06-18 07:28:40 [29762] [14] DEBUG: AT2[movimx2]: memory check error
> 2009-06-18 07:28:40 [29762] [14] ERROR: AT2[movimx2]: Couldn't connect
> (retrying in 10 seconds).
> 2009-06-18 07:30:16 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
> unassigned (unallocated) number
> 2009-06-18 07:30:16 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
> ERROR: unassigned (unallocated)
> number
> 2009-06-18 07:31:54 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
> no network service
> 2009-06-18 07:31:54 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
> ERROR: no network service
> 2009-06-18 07:32:41 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR: congestion
> 2009-06-18 07:32:41 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
> ERROR: congestion
> 2009-06-18 07:33:00 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
> unassigned (unallocated) number
> 2009-06-18 07:33:00 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
> ERROR: unassigned (unallocated)
> number
> 2009-06-18 07:34:56 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
> no network service
> 2009-06-18 07:34:56 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
> ERROR: no network service
> 2009-06-18 07:35:47 [29762] [14] DEBUG: AT2[movimx2]: memory check error
> 2009-06-18 07:35:47 [29762] [14] ERROR: AT2[movimx2]: Couldn't connect
> (retrying in 10 seconds).
> 2009-06-18 07:37:04 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR: congestion
> 2009-06-18 07:37:04 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
> ERROR: congestion
> 
> ...
> 
> 2009-06-18 12:23:06 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
> network out of order
> 2009-06-18 12:23:06 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
> ERROR: network out of order
> 
> ...
> 
> I use:
> 
> Kannel bearerbox version `cvs-20090513'. Build `May 12 2009 19:25:12',
> compiler `4.1.2 20070626 (Red Hat 4.1.2-13)'.
> 
> 
> Regards
> 
> Alvaro
> 
> 
> 
> |-----------------------------------------------------------------------------------------------------------------|
> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
> celular y Nextel
> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
> SMS y GPRS online
>               Visitenos en www.perusms.NET www.smsglobal.com.mx y
> www.pravcom.com
> 
> 
> 
> On Thu, Jun 18, 2009 at 11:17 AM, Vincent
> CHAVANIS<[email protected]> wrote:
>> This is already as it.
>>
>> error(0, "AT2[%s]: +CMS ERROR: %s (%d)", octstr_get_cstr(privdata->name),
>> at2_error_string(errcode), errcode);
>>
>> Vincent.
>>
>>
>> Alvaro Cornejo a écrit :
>>> Hi Vincent
>>>
>>> Might it be possible to show the message error number/code in the
>>> error message text? This way it will be easyer to google for
>>> additional information.
>>>
>>> someting like:
>>>
>>>
>>>     case 0:
>>>         /*
>>>          * Station cannot be reached because, although the number is in a
>>>          * valid format, it is not currently assigned (allocated).
>>>          */
>>>        return "[0] Unassigned (unallocated) number (+CMS) or No
>>> connection to phone (+CME)";
>>>    case 2:
>>>        return "[2] Phone-adaptor link reserved";
>>>     case 3:
>>>         /*
>>>          * This can be a lot of things, depending upon the command,
>>> but in general
>>>          * it relates to invaid parameters being passed.
>>>          */
>>>         return "[3] Operation / Parameter(s) not supported";
>>>    case 5:
>>>        return "[5] PH-SIM PIN required";
>>> ...
>>>
>>>     default:
>>>        return "[code] Error number unknown. Ask google and add it";
>>>
>>> This will also help people parse the logs
>>>
>>> Regards
>>>
>>> Alvaro
>>>
>>>
>>
> 
> 

-- 
Telemaque - 06560 SOPHIA-ANTIPOLIS - (FR)
Service Technique/Reseau - NOC
Direction du Developpement xMS+
http://www.telemaque.fr/
[email protected]
Tel : +33 4 92 90 99 84 (fax 9142)