Re: [PATCH] smsc_at2.c error string

But from what i see,
Your modem does not send any error code
<-- +CMS ERROR: no network service
You just receive this text, and this does not match any error codes.
So nothing is displayed.

This is probably because you did not initialize
your modem with +CMEE=1 (numeric errors)

regards

Vincent.


Vincent CHAVANIS a écrit :
> 
> No this is currently uppon approval to be on CVS.
> You can freely give your opignon though ;)
> 
> Vincent.
> 
> 
> Alvaro Cornejo a écrit :
>> Hi Vincent
>>
>> Is that in the latest CVS?
>>
>> I got this as error string:
>>
>>
>> cat /var/log/kannel/x1p7_movimx2.log |grep -i error |more
>>
>> 2009-06-18 06:08:41 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
>> no network service
>> 2009-06-18 06:08:41 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
>> ERROR: no network service
>> ...
>>
>> 2009-06-18 21:16:59 [29762] [13] DEBUG: AT2[movimx1]: <-- +CMS ERROR: 
>> congestion
>> 2009-06-18 21:16:59 [29762] [13] ERROR: AT2[movimx1]: CMS ERROR: +CMS
>> ERROR: congestion
>> ...
>>
>> 2009-06-18 07:28:05 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
>> unassigned (unallocated) number
>> 2009-06-18 07:28:05 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
>> ERROR: unassigned (unallocated)
>> number
>> 2009-06-18 07:28:40 [29762] [14] DEBUG: AT2[movimx2]: memory check error
>> 2009-06-18 07:28:40 [29762] [14] ERROR: AT2[movimx2]: Couldn't connect
>> (retrying in 10 seconds).
>> 2009-06-18 07:30:16 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
>> unassigned (unallocated) number
>> 2009-06-18 07:30:16 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
>> ERROR: unassigned (unallocated)
>> number
>> 2009-06-18 07:31:54 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
>> no network service
>> 2009-06-18 07:31:54 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
>> ERROR: no network service
>> 2009-06-18 07:32:41 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR: 
>> congestion
>> 2009-06-18 07:32:41 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
>> ERROR: congestion
>> 2009-06-18 07:33:00 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
>> unassigned (unallocated) number
>> 2009-06-18 07:33:00 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
>> ERROR: unassigned (unallocated)
>> number
>> 2009-06-18 07:34:56 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
>> no network service
>> 2009-06-18 07:34:56 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
>> ERROR: no network service
>> 2009-06-18 07:35:47 [29762] [14] DEBUG: AT2[movimx2]: memory check error
>> 2009-06-18 07:35:47 [29762] [14] ERROR: AT2[movimx2]: Couldn't connect
>> (retrying in 10 seconds).
>> 2009-06-18 07:37:04 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR: 
>> congestion
>> 2009-06-18 07:37:04 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
>> ERROR: congestion
>>
>> ...
>>
>> 2009-06-18 12:23:06 [29762] [14] DEBUG: AT2[movimx2]: <-- +CMS ERROR:
>> network out of order
>> 2009-06-18 12:23:06 [29762] [14] ERROR: AT2[movimx2]: CMS ERROR: +CMS
>> ERROR: network out of order
>>
>> ...
>>
>> I use:
>>
>> Kannel bearerbox version `cvs-20090513'. Build `May 12 2009 19:25:12',
>> compiler `4.1.2 20070626 (Red Hat 4.1.2-13)'.
>>
>>
>> Regards
>>
>> Alvaro
>>
>>
>>
>> |-----------------------------------------------------------------------------------------------------------------| 
>>
>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
>> celular y Nextel
>> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
>> SMS y GPRS online
>>               Visitenos en www.perusms.NET www.smsglobal.com.mx y
>> www.pravcom.com
>>
>>
>>
>> On Thu, Jun 18, 2009 at 11:17 AM, Vincent
>> CHAVANIS<[email protected]> wrote:
>>> This is already as it.
>>>
>>> error(0, "AT2[%s]: +CMS ERROR: %s (%d)", 
>>> octstr_get_cstr(privdata->name),
>>> at2_error_string(errcode), errcode);
>>>
>>> Vincent.
>>>
>>>
>>> Alvaro Cornejo a écrit :
>>>> Hi Vincent
>>>>
>>>> Might it be possible to show the message error number/code in the
>>>> error message text? This way it will be easyer to google for
>>>> additional information.
>>>>
>>>> someting like:
>>>>
>>>>
>>>>     case 0:
>>>>         /*
>>>>          * Station cannot be reached because, although the number is 
>>>> in a
>>>>          * valid format, it is not currently assigned (allocated).
>>>>          */
>>>>        return "[0] Unassigned (unallocated) number (+CMS) or No
>>>> connection to phone (+CME)";
>>>>    case 2:
>>>>        return "[2] Phone-adaptor link reserved";
>>>>     case 3:
>>>>         /*
>>>>          * This can be a lot of things, depending upon the command,
>>>> but in general
>>>>          * it relates to invaid parameters being passed.
>>>>          */
>>>>         return "[3] Operation / Parameter(s) not supported";
>>>>    case 5:
>>>>        return "[5] PH-SIM PIN required";
>>>> ...
>>>>
>>>>     default:
>>>>        return "[code] Error number unknown. Ask google and add it";
>>>>
>>>> This will also help people parse the logs
>>>>
>>>> Regards
>>>>
>>>> Alvaro
>>>>
>>>>
>>>
>>
>>
> 

-- 
Telemaque - 06560 SOPHIA-ANTIPOLIS - (FR)
Service Technique/Reseau - NOC
Direction du Developpement xMS+
http://www.telemaque.fr/
[email protected]
Tel : +33 4 92 90 99 84 (fax 9142)