Re: Confuse smpp with tlv

Hi,

You cannot capture tcp packets from the same server. You don't get actual TCP traffic. You need to do it from another server. But, why do you want to capture your lynx output? That's not the issue.

BR,
Nikos
  ----- Original Message ----- 
  From: Benjamin Heryanto 
  To: [email protected] 
  Sent: Saturday, October 10, 2009 3:48 AM
  Subject: Re: Confuse smpp with tlv


  Dear List

  if i use lynx "http://127.0.0.1:13013/cgi-bin/sendsms?user=...... to send sms there is no wireshark capture for what i sent, how to capture this action (capture filter in wireshark) coz i can see the kannel.log (see my email before) ...

  Thx 
  Benjamin


  On Fri, Oct 9, 2009 at 6:25 AM, Benjamin Heryanto <[email protected]> wrote:

    Dear Nikos

    I attach the wire output

    Regards
    Benjamin


    2009/10/9 Nikos Balkanas <[email protected]> 


      Hi,

      Could you please attach relevant wireshark output?

      BR,
      Nikos
        ----- Original Message ----- 
        From: Benjamin Heryanto 
        To: [email protected] 
        Sent: Friday, October 09, 2009 1:23 AM
        Subject: Confuse smpp with tlv


        Dear list 

        After configure smpp with tlv (using cvs version "Kannel/cvs-20090520")


        This is my configuration

        group = smsc
        smsc = smpp
        host = xxx.xxx.xxx.xxx
        port = 10293
        smsc-username = a
        smsc-password = b
        system-type = tcp
        smsc-id = new
        allowed-smsc-id = new
        transceiver-mode = yes
        source-addr-ton = 0
        source-addr-npi = 1
        source-addr-autodetect = no
        address-range = ""
        dest-addr-ton = 0
        dest-addr-npi = 1
        msg-id-type = 0x01
        throughput = 1

        /etc/kannel/smpp-tlv.conf
        group = smpp-tlv
        name = short_name
        tag = 0x5120
        type = octetstring
        length = 8

        group = smpp-tlv
        name = txid
        tag = 0x5121
        type = integer
        length = 20

        group = smpp-tlv
        name = conttype
        tag = 0x5123
        type = octetstring
        length = 20


         lynx "http://127.0.0.1:13013/cgi-bin/sendsms?user=new&smsc=new&pass=new&to=234355058673&from=123404&text=testing+push&meta-data=%3Fsmpp%3Fshort_name%3Dcr9trial"

        In /var/log/kannel/access.log
        2009-10-08 11:14:56 FAILED Send SMS [SMSC:new] [SVC:abc] [ACT:] [BINF:] [FID:] [META:?smpp?short_name=cr9trial] [from:123404] [to:234355058673] [flags:-1:0:-1:-1:-1] [msg:12:testing push] [udh:0:]

        In /var/log/kannel/kannel.log
        2009-10-08 11:14:55 [10888] [32] DEBUG: boxc_receiver: sms received
        2009-10-08 11:14:55 [10888] [32] DEBUG: send_msg: sending msg to box: <127.0.0.1>
        2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Manually forced source addr ton = 0, source add npi = 1
        2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Manually forced dest addr ton = 0, dest add npi = 1
        2009-10-08 11:14:55 [10888] [9] DEBUG: new group created `smpp'
        2009-10-08 11:14:55 [10888] [9] DEBUG: group=`smpp' key=`short_name' value=`cr9trial'
        2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Sending PDU:
        2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP PDU 0xc7c0ef0 dump:
        2009-10-08 11:14:55 [10888] [9] DEBUG:   type_name: submit_sm
        2009-10-08 11:14:55 [10888] [9] DEBUG:   command_id: 4 = 0x00000004
        2009-10-08 11:14:55 [10888] [9] DEBUG:   command_status: 0 = 0x00000000
        2009-10-08 11:14:55 [10888] [9] DEBUG:   sequence_number: 25577 = 0x000063e9
        2009-10-08 11:14:55 [10888] [9] DEBUG:   service_type: NULL
        2009-10-08 11:14:55 [10888] [9] DEBUG:   source_addr_ton: 0 = 0x00000000
        2009-10-08 11:14:55 [10888] [9] DEBUG:   source_addr_npi: 1 = 0x00000001
        2009-10-08 11:14:55 [10888] [9] DEBUG:   source_addr: "123404"
        2009-10-08 11:14:55 [10888] [9] DEBUG:   dest_addr_ton: 0 = 0x00000000
        2009-10-08 11:14:55 [10888] [9] DEBUG:   dest_addr_npi: 1 = 0x00000001
        2009-10-08 11:14:55 [10888] [9] DEBUG:   destination_addr: "234355058673"
        2009-10-08 11:14:55 [10888] [9] DEBUG:   esm_class: 3 = 0x00000003
        2009-10-08 11:14:55 [10888] [9] DEBUG:   protocol_id: 0 = 0x00000000
        2009-10-08 11:14:55 [10888] [9] DEBUG:   priority_flag: 0 = 0x00000000
        2009-10-08 11:14:55 [10888] [9] DEBUG:   schedule_delivery_time: NULL
        2009-10-08 11:14:55 [10888] [9] DEBUG:   validity_period: NULL
        2009-10-08 11:14:55 [10888] [9] DEBUG:   registered_delivery: 0 = 0x00000000
        2009-10-08 11:14:55 [10888] [9] DEBUG:   replace_if_present_flag: 0 = 0x00000000
        2009-10-08 11:14:55 [10888] [9] DEBUG:   data_coding: 0 = 0x00000000
        2009-10-08 11:14:55 [10888] [9] DEBUG:   sm_default_msg_id: 0 = 0x00000000
        2009-10-08 11:14:55 [10888] [9] DEBUG:   sm_length: 15 = 0x0000000f
        2009-10-08 11:14:55 [10888] [9] DEBUG:   short_message: "testing push"
        2009-10-08 11:14:55 [10888] [9] DEBUG:   short_name: "cr9trial"
        2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP PDU dump ends.
        2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP[new]: Got PDU:
        2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP PDU 0xc7a0fb8 dump:
        2009-10-08 11:14:56 [10888] [9] DEBUG:   type_name: submit_sm_resp
        2009-10-08 11:14:56 [10888] [9] DEBUG:   command_id: 2147483652 = 0x80000004
        2009-10-08 11:14:56 [10888] [9] DEBUG:   command_status: 1031 = 0x00000407
        2009-10-08 11:14:56 [10888] [9] DEBUG:   sequence_number: 25577 = 0x000063e9
        2009-10-08 11:14:56 [10888] [9] DEBUG:   message_id: NULL
        2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP PDU dump ends.
        2009-10-08 11:14:56 [10888] [9] ERROR: SMPP[new]: SMSC returned error code 0x00000407 (Vendor-specific error, please refer to your SMPP provider) in response to submit_sm.
        [I edit some data]

        The situation is my telco doing migration system with optional parameter. and they need wireshark data from us 
        From that there is submit_sm (kannel log above), but i can't see submit_sm in wireshark, why this could happen.  i have another connection to other port for the same ip and that connection not using any meta data and it work give submit_sm in wireshark.

        Regards
        Benjamin