DLR-url not being called
Matthew Muscat <[email protected]>
| Newsgroups | gmane.comp.mobile.kannel.devel |
|---|---|
| Message-ID | <[email protected]> |
Hey everyone,
cannot seem to figure out whats going wrong here and was hoping someone
might have an idea as to whats wrong...
basically all my sms's are able to be sent out however getting a status of
the message doesn't work
(please note ive blanked out specific urls and usernames/passwords -
smpp1test.com is replaced too)
basiaclly my php script calls the sendsms cgi which all works fine and sends
dlr-mask=31 and a urlencoded dlr-url
$dlr_url = "http://sms.*****.
com.au/delivery_report.php?smsId=$messageId[$i]&smscId=%i&status=%A&dest=%p
";
$r= new HttpRequest("http://127.0.0.1:13002/cgi-bin/sendsms",
HttpRequest::METH_GET);
$r->addQueryData(array(username=>"matthew",password=>"password",from=>$senderId,to=>$sendList[$i],text=>urlencode($message),dlr-mask=>"31",dlr-url=>urlencode($dlr_url)));
so overall my request turns out like...
http://127.0.0.1:13002/cgi-bin/sendsms?username=****&password=****&from=$from&to=$to&text=$tmessage&dlr-mask=31&dlr-url=$dlr_url
message gets sent, can see it on the providers ends - however no report
comes back - of which i can type in the url manually and it will update my
database accordingly
i think the issue stems from this line
2010-06-10 13:07:39 [27802] [0] INFO: DLR rerouting for smsc id <smpp1>
disabled.
however i dont know what is causing this
any ideas? - a big thanks to anyone that can help!
my log file for the core is...
2010-06-10 13:07:39 [27802] [0] INFO: Added logfile `/home/*****/kannel.log'
> with level `0'.
>
> 2010-06-10 13:07:39 [27802] [0] INFO: HTTP: Opening server at port 13000.
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: Started thread 1
> (gwlib/fdset.c:poller)
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: Started thread 2
> (gwlib/http.c:server_thread)
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: Started thread 3
> (gw/bb_http.c:httpadmin_run)
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: starting smsbox connection module
>
> 2010-06-10 13:07:39 [27802] [2] DEBUG: Thread 2
> (gwlib/http.c:server_thread) maps to pid 27802.
>
> 2010-06-10 13:07:39 [27802] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps
> to pid 27802.
>
> 2010-06-10 13:07:39 [27802] [3] DEBUG: Thread 3
> (gw/bb_http.c:httpadmin_run) maps to pid 27802.
>
> 2010-06-10 13:07:39 [27802] [0] INFO: BOXC: 'smsbox-max-pending' not set,
> using default (100).
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: Adding smsbox routing to id <smpp1>
> for receiver no <*> and smsc id <smpp1>
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: Started thread 4
> (gw/bb_boxc.c:sms_to_smsboxes)
>
> 2010-06-10 13:07:39 [27802] [4] DEBUG: Thread 4
> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 27802.
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: Started thread 5
> (gw/bb_boxc.c:smsboxc_run)
>
> 2010-06-10 13:07:39 [27802] [0] INFO: Set SMS resend frequency to 60
> seconds.
>
> 2010-06-10 13:07:39 [27802] [0] INFO: SMS resend retry set to unlimited.
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: smsbox MO concatenated message
> handling enabled
>
> 2010-06-10 13:07:39 [27802] [0] INFO: DLR rerouting for smsc id <smpp1>
> disabled.
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: Started thread 6
> (gw/smsc/smsc_smpp.c:io_thread)
>
> 2010-06-10 13:07:39 [27802] [6] DEBUG: Thread 6
> (gw/smsc/smsc_smpp.c:io_thread) maps to pid 27802.
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: Started thread 7
> (gw/smsc/smsc_smpp.c:io_thread)
>
> 2010-06-10 13:07:39 [27802] [0] DEBUG: Started thread 8
> (gw/bb_smscconn.c:sms_router)
>
> 2010-06-10 13:07:39 [27802] [0] INFO:
> ----------------------------------------
>
> 2010-06-10 13:07:39 [27802] [0] INFO: Kannel bearerbox II version 1.4.3
> starting
>
> 2010-06-10 13:07:39 [27802] [8] DEBUG: Thread 8
> (gw/bb_smscconn.c:sms_router) maps to pid 27802.
>
> 2010-06-10 13:07:39 [27802] [0] INFO: MAIN: Start-up done, entering
> mainloop
>
> 2010-06-10 13:07:39 [27802] [7] DEBUG: Thread 7
> (gw/smsc/smsc_smpp.c:io_thread) maps to pid 27802.
>
> 2010-06-10 13:07:39 [27802] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run)
> maps to pid 27802.
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: SMPP[smpp1]: Sending PDU:
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: SMPP PDU 0x2b5d080010a0 dump:
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: type_name: bind_transceiver
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: command_id: 9 = 0x00000009
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: command_status: 0 = 0x00000000
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: sequence_number: 1 = 0x00000001
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: system_id: "*****"
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: password: "*****"
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: system_type: "default"
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: interface_version: 52 = 0x00000034
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: addr_ton: 0 = 0x00000000
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: addr_npi: 0 = 0x00000000
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: address_range: NULL
>
> 2010-06-10 13:07:40 [27802] [6] DEBUG: SMPP PDU dump ends.
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: SMPP[smpp1]: Sending PDU:
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: SMPP PDU 0x50b8020 dump:
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: type_name: bind_receiver
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: command_id: 1 = 0x00000001
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: command_status: 0 = 0x00000000
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: sequence_number: 2 = 0x00000002
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: system_id: "****"
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: password: "****"
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: system_type: "default"
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: interface_version: 52 = 0x00000034
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: addr_ton: 0 = 0x00000000
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: addr_npi: 0 = 0x00000000
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: address_range: NULL
>
> 2010-06-10 13:07:40 [27802] [7] DEBUG: SMPP PDU dump ends.
>
> 2010-06-10 13:07:41 [27802] [6] DEBUG: SMPP[smpp1]: Got PDU:
>
> 010-06-10 13:07:48 [27802] [6] DEBUG: SMPP PDU 0x2b5d080014b0 dump:
>
> 2010-06-10 13:07:48 [27802] [6] DEBUG: type_name: unbind_resp
>
> 2010-06-10 13:07:48 [27802] [6] DEBUG: command_id: 2147483654 =
> 0x80000006
>
> 2010-06-10 13:07:48 [27802] [6] DEBUG: command_status: 0 = 0x00000000
>
> 2010-06-10 13:07:48 [27802] [6] DEBUG: sequence_number: 3 = 0x00000003
>
> 2010-06-10 13:07:48 [27802] [6] DEBUG: SMPP PDU dump ends.
>
> 2010-06-10 13:07:48 [27802] [6] DEBUG: SMPP[smpp1]: io_thread: break and
> shutting down
>
> 2010-06-10 13:07:48 [27802] [6] DEBUG: Thread 6
> (gw/smsc/smsc_smpp.c:io_thread) terminates.
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: SMPP[smpp1]: Sending unbind:
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: SMPP PDU 0x50b8220 dump:
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: type_name: unbind
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: command_id: 6 = 0x00000006
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: command_status: 0 = 0x00000000
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: sequence_number: 4 = 0x00000004
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: SMPP PDU dump ends.
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: SMPP[smpp1]: Got PDU:
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: SMPP PDU 0x50b8220 dump:
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: type_name: unbind_resp
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: command_id: 2147483654 =
> 0x80000006
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: command_status: 0 = 0x00000000
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: sequence_number: 4 = 0x00000004
>
> 2010-06-10 13:07:48 [27802] [7] DEBUG: SMPP PDU dump ends.
>
and my configuration file is
#
# Sample configuration file for Kannel bearerbox on Debian.
# See the documentation for explanations of fields.
#
# HTTP administration is disabled by default. Make sure you set the
# password if you enable it.
group = core
admin-port=13000
smsbox-port=13001
admin-password=*****
status-password=*****
log-file="/home/*****/kannel.log"
log-level=0
# box-deny-ip="*.*.*.*"
#dlr-storage=mysql
dlr-storage=internal
box-allow-ip="*.*.*.*"
group=smsc
smsc=smpp
smsc-id=smpp1
host=smsc6.smpp1test.com
port=7777
smsc-username=*****test
smsc-password=Asu3PZt6
system-type=default
transceiver-mode=1
interface-version=34
connect-allow-ip="127.0.0.1"
msg-id-type=0x01
receive-port=7777
log-level=0
group=smsbox
bearerbox-host=127.0.0.1
sendsms-port=13002
smsbox-id=smpp1
log-level=0
log-file=\"/home/*****/smsbox.log\"
access-log=\"/home/*****/smsbox-access.log\"
group=sendsms-user
username=****
password=****
user-allow-ip="*.*.*.*"
default-smsc=smpp1
group=dlr-db
id=mydlr
table=dlr
field-smsc=smsc
field-timestamp=ts
field-source=destination
field-destination=source
field-destination=source
field-service=service
field-url=url
field-mask=mask
field-status=status
field-boxc-id=boxc
group=mysql-connection
id=mydlr
host=localhost
username=*****
password=****
database=kannel
max-connections=1
group=smsbox-route
smsbox-id=smpp1
shortcode=*
smsc-id=smpp1