Re: Problem with got +CMT but pdu_extract failed

Try lowering the speed from 115200 to 28800.

On Sat, Jun 12, 2010 at 5:36 AM, <[email protected]> wrote:

> I am getting a problem with the kannel bearerbox not being able to read
> from the modem.  Previously my configs were working, and then this error
> started popping up.
> I updated to Kannel v 1.4.3, and I still get the same error.  I cannot get
> messages from the modem any more and it wont send those messages either, so
> I am really stuck.
>
>
>
> 2010-06-11 18:09:45 [24845] [0] INFO: MAIN: Start-up done, entering
> mainloop
> 2010-06-11 18:09:45 [24845] [0] DEBUG: AT2[airlink1]: start called
> 2010-06-11 18:09:45 [24863] [15] DEBUG: Thread 15
> (gw/bb_store_file.c:store_dumper) maps to pid 24863.
> 2010-06-11 18:09:45 [24863] [15] DEBUG: Dumping 0 messages to store
> 2010-06-11 18:09:45 [24854] [6] DEBUG: AT2[airlink1]: device opened
> 2010-06-11 18:09:45 [24854] [6] INFO: AT2[airlink1]: Logging in
> 2010-06-11 18:09:46 [24854] [6] INFO: AT2[airlink1]: init device
> 2010-06-11 18:09:46 [24854] [6] INFO: AT2[airlink1]: speed set to 115200
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: --> ATZ^M
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: --> AT^M
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- AT
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: --> AT&F^M
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- AT&F
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: --> ATE0^M
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- ATE0
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: --> AT\Q3^M
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: --> AT+CPIN?^M
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- +CPIN: READY
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:46 [24854] [6] DEBUG: AT2[airlink1]: --> AT+CMGF=0^M
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: --> AT+CSMS=?^M
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: <-- +CSMS: (0,1)
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:47 [24854] [6] INFO: AT2[airlink1]: Phase 2+ is supported
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: --> AT+CSMS=1^M
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: <-- +CSMS: 1,1,1
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: --> AT+CMGR=2^M
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: <-- +CMGR: 0,,0
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: <-- OK
> 2010-06-11 18:09:47 [24854] [6] DEBUG: AT2[airlink1]: received message from
> SMSC:
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
> 2010-06-11 18:09:47 [24854] [6] ERROR: AT2[airlink1]: got +CMT but
> pdu_extract failed
> 2010-06-11 18:09:51 [24854] [6] ERROR: AT2[airlink1]: Initialization of
> device failed.
> 2010-06-11 18:09:51 [24854] [6] INFO: AT2[airlink1]: Closing device
> 2010-06-11 18:09:51 [24854] [6] ERROR: AT2[airlink1]: Couldn't connect
> (retrying in 10 seconds).
>
>
>
>
> Here is the config file kannel.conf:
>
> ==========================================
> #
> # THIS IS A SAMPLE CONFIGURATION FOR SMS KANNEL
> #
> # This second/other SMS Kannel configuration is meant to be used
> # together with original gw/smskannel.conf, to test out Kannel as
> # HTTP SMSC.
> #
> # The entire system is run like this
> #
> #  1% gw/bearerbox gw/smskannel.conf
> #  2% gw/smsbox gw/smskannel.conf
> #  1% gw/bearerbox gw/other_smskannel.conf
> #  2% gw/smsbox gw/other_smskannel.conf
> #  3% test/fakesmsc -r 10000 -H localhost -i 1 -m 100 "100 300 text relay
> nop"
> #
> # ..all 3 commands in separate shells (or screen sessions)
> #
> # For any modifications to this file, see Kannel User Guide
> # If that does not help, send email to [email protected]
> #
> #   Kalle Marjola Mar 2001
> #
>
> group = core
> admin-port = 15000
> smsbox-port = 15001
> admin-password = airlink
> box-deny-ip = "*.*.*.*"
> box-allow-ip = "127.0.0.1"
> # Wapbox related
> wapbox-port = 13002
> udp-deny-ip = "*.*.*.*"
> udp-allow-ip = "127.0.0.1"
> wdp-interface-name = "*"
> log-file = "/var/log/kannel.log"
> log-level = 0
> access-log = "/var/log/kannel-access.log"
> store-file = "/var/lib/kannel/kannel.store"
>
>
> group = wapbox
> bearerbox-host = localhost
> log-file = "/var/log/wapbox.log"
>
> # SMSC CONNECTIONS
>
> #Modem5
> group = modems
> id = wavecom
> name = Wavecom
> detect-string = "WAVECOM"
> #no-smsc = true
> #broken = true
> #no_smsc = true
>
> #
> # dg-2010-04-19-1006 -
> # ... modemtype = siemens_mc75
> # ... commented out sim-buffering=true
> # ...v1.1
> #   modemtype = auto
> # ...v1.2
> #   uncomment sim-buffering
> # ...v1.3
> #   modemtype=siemens_mc75
> #   comment out sim-buffering
> # ...v1.4
> #   uncomment sim-buffering
> #
> group = smsc
> smsc = at
> smsc-id = airlink1
> #modemtype = auto
> modemtype = siemens_mc75
> #modemtype = wavecom
> device = /dev/ttyS0
> #device = /dev/null
> speed = 115200
> my-number = 5124061150
> sim-buffering = true
>
>
> include = "/etc/kannel/modems.conf"
> #include = "/home/devec/kannel/gateway-1.4.1/doc/examples/modems.conf"
>
> #Services
> group = sms-service
> keyword = default
> #keyword-regex = .*
> catch-all = yes
> #max-messages = 0
> #get-url = "
> http://dev.yfcimpact.net/kannel/receive.php?keyword=%k&second=%s&r=%r&whole_message=%a&sent=%t&from=%p&udh_data=%u&udh_length=%U
> "
> get-url = "
> http://www.traqone.com/al_module.php?session_name=script_user-airlink_corp&session_id=4429783499252&page_action=ENTERNEWREC&page_type=PT_POPUP&module_class=tq1_sms_text_message&alft_layout_id=ALFTID=2457&ext_var_flag=TRUE&ext_var_arg_num_messages=1&ext_var_arg_message_time=%t&ext_var_arg_message_date=%t&ext_var_arg_message_content=%b&ext_var_arg_message_caller_id=%p&ext_var_arg_message_caller_id_formatted=%p&ext_var_arg_message_recipient_caller_id_formatted=%P
> "
> omit-empty = 1
>
>
> # SMSBOX SETUP
>
> group = smsbox
> bearerbox-host = 127.0.0.1
> sendsms-port = 15015
> global-sender = 15015
> log-file = "/var/log/smsbox.log"
> log-level = 0
>
> # SEND-SMS USERS
>
> group = sendsms-user
> username = tester
> password = foobar
> max-messages = 10
> concatenation = 1
>
> =========================================
>
>
>
> Here is the config file modems.conf:
>
>
>
> ========================================
>
>
> # Modems configuration
> #
> # Example and default values
> #
> # group = modems
> # id = "my-id"
> # name = "my-name"
> # detect-string = "MODEM"
> # detect-string2 = "" [Default]
> # init-string = "AT+CNMI=1,2,0,0,0" [Default]
> # speed = 9600 [Default]
> # enable-hwhs = "AT+IFC=2,2" [Default]
> # need-sleep = false [Default]
> # no-pin = false [Default]
> # no-smsc = false [Default]
> # sendline-sleep = 100 [Default, miliseconds]
> # keepalive-cmd = "AT" [Default]
> # broken = false [Default]
> # message-storage = "SM"
> # enable-mms = false [Default]
>
>
> # If modemtype=auto, try everyone and defaults to this one
> group = modems
> id = generic
> name = "Generic Modem"
>
> group = modems
> id = wavecom
> name = Wavecom
> detect-string = "WAVECOM"
>
> group = modems
> id = premicell
> name = Premicell
> detect-string = "PREMICEL"
> no-pin = true
> no-smsc = true
>
>
> #
> # dg 2010-04-19-1052
> #... changed init-string from AT to AT+CMGR=0
> #
> #
> #
>
> #added by rob
> group = modems
> id = siemens_mc75
> name = "Siemens MC75"
> detect-string = "SIEMENS"
> detect-string2 = "MC75"
> init-string = "AT+CMGR=2"
> #init-string = "AT"
> speed = 115200
> enable-hwhs = "AT\\Q3"
> need-sleep = true
> #no-smsc = true
>
>
> group = modems
> id = siemens_tc35
> name = "Siemens TC35"
> detect-string = "SIEMENS"
> detect-string2 = "TC35"
> init-string = "AT+CNMI=1,2,0,1,1"
> speed = 19200
> enable-hwhs = "AT\\Q3"
> need-sleep = true
>
> group = modems
> id = siemens_m20
> name = "Siemens M20"
> detect-string = "SIEMENS"
> detect-string2 = "M20"
> speed = 19200
> enable-hwhs = "AT\\Q3"
> keepalive-cmd = "AT+CBC;+CSQ"
> need-sleep = true
>
> group = modems
> id = siemens_sl45
> name = "Siemens SL45"
> detect-string = "SIEMENS"
> detect-string2 = "SL45"
> init-string = "AT+CNMI=1,2,2,2,1"
> keepalive-cmd = "AT+CBC;+CSQ"
> speed = 19200
> enable-hwhs = "AT\\Q3"
> need-sleep = true
> message-storage = "SM"
>
> group = modems
> id = nokiaphone
> name = "Nokia Phone"
> detect-string = "Nokia Mobile Phone"
> need-sleep = true
> keepalive-cmd = "AT+CBC;+CSQ"
> enable-mms = true
>
> group = modems
> id = falcom
> name = "Falcom"
> detect-string = "Falcom"
> #no-smsc = true
>
> group = modems
> id = ericsson_r520m
> name = "Ericsson R520m"
> detect-string = "R520m"
> init-string = "AT+CNMI=3,2,0,0"
>
> group = modems
> id = ericsson_t68
> name = "Ericsson T68"
> detect-string = "T68"
> init-string = "AT+CNMI=3,3"
> keepalive-cmd = "AT+CBC;+CSQ"
> broken = true
>
> group = modems
> id = sonyericsson_gr47
> name = "Sony Ericsson GR47"
> detect-string = "GR47"
> message-storage = "ME"
> # use this init-string for non sim-buffering
> init-string = "AT+CNMI=3,2,0,0"
> # use this init-string for sim-buffering
> #init-string = "AT+CNMI=3,1,0,0"
> reset-string = "ATZ"
> broken = true
>
> group = modems
> id = alcatel
> name = "Alcatel"
> detect-string = "Alcatel"
> init-string = "AT+CNMI=3,2,0,0"
>
> group = modems
> id = sonyericsson_T630-T628
> name = "Sony Ericsson T630-T628?
> init-string = "AT+CNMI=2,3,2,0,0;+CMGF=0?
> keepalive-cmd = "AT+CBC;+CSQ;+CMGF=0?
> broken = true
>
>
>
> =====================================
>
>
> According to previous logs, out modem is:
>
>
> 2009-02-05 10:46:19 [14314] [6] DEBUG: AT2[/dev/ttyS0]: --> ATI^M
> 2009-02-05 10:46:19 [14314] [6] DEBUG: AT2[/dev/ttyS0]: <-- SIEMENS
> 2009-02-05 10:46:19 [14314] [6] DEBUG: AT2[/dev/ttyS0]: <-- MC75
> 2009-02-05 10:46:19 [14314] [6] DEBUG: AT2[/dev/ttyS0]: <-- REVISION 01.001
> 2009-02-05 10:46:19 [14314] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
>
>
> ----TQEM-TraqOne ID-LINK-TQ1ID-9884-4-64-4366173----
>
>
>
>