Re: GSM Modem is not sending SMS or even not putting into queue

Andreas,

I have attached my configuration file for more details..

*BearBox Log:-*

2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: gwlist_len = 14
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x855e568 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x8578d30 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x85605c0 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x8560040 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0xb56011c0 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x857ae78 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x8568730 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x8568a00 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x857b0f8 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x855cc80 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x857ed08 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x85694d0 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x8569790 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x85602f8 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: handling message
(0x855e568 vs 0x855e568)
2012-10-10 15:00:12 [3099] [7] DEBUG: Routing failed, re-queued.
2012-10-10 15:00:12 [3099] [7] DEBUG: sms_router: time to sleep 30.00 secs.

*SMSBox:-*

2012-10-10 14:55:00 [3108] [0] DEBUG:     <password> = <bhati>
2012-10-10 14:55:00 [3108] [0] DEBUG: Started thread 4
(gw/smsbox.c:obey_request_thread)
2012-10-10 14:55:00 [3108] [0] DEBUG: Started thread 5
(gw/smsbox.c:url_result_thread)
2012-10-10 14:55:00 [3108] [0] DEBUG: Started thread 6
(gw/smsbox.c:http_queue_thread)
2012-10-10 14:55:00 [3108] [0] INFO: Connected to bearerbox at localhost
port 13001.
2012-10-10 14:55:00 [3108] [0] DEBUG: Started thread 7
(gw/heartbeat.c:heartbeat_thread)
2012-10-10 14:55:00 [3108] [4] DEBUG: Thread 4
(gw/smsbox.c:obey_request_thread) maps to pid 3108.
2012-10-10 14:55:00 [3108] [5] DEBUG: Thread 5
(gw/smsbox.c:url_result_thread) maps to pid 3108.
2012-10-10 14:55:00 [3108] [6] DEBUG: Thread 6
(gw/smsbox.c:http_queue_thread) maps to pid 3108.
2012-10-10 14:55:00 [3108] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread)
maps to pid 3108.
2012-10-10 14:55:00 [3108] [7] DEBUG: Thread 7
(gw/heartbeat.c:heartbeat_thread) maps to pid 3108.
2012-10-10 14:55:13 [3108] [2] DEBUG: HTTP: Creating HTTPClient for
`115.115.95.162'.
2012-10-10 14:55:13 [3108] [2] DEBUG: HTTP: Created HTTPClient area
0xb53005c8.
2012-10-10 14:55:13 [3108] [3] INFO: smsbox: Got HTTP request
</cgi-bin/sendsms> from <115.115.95.162>
2012-10-10 14:55:13 [3108] [3] INFO: sendsms used by <virendra>
2012-10-10 14:55:13 [3108] [3] INFO: sendsms sender:<virendra:9718500594>
(115.115.95.162) to:<00919718500594> msg:<"Hi Virendra Bhati, SMS gateway
is working now">
2012-10-10 14:55:13 [3108] [3] DEBUG: Stored UUID
f70cb417-6ba2-4217-a489-19547ebe68f2
2012-10-10 14:55:13 [3108] [3] DEBUG: message length 47, sending 1 messages
2012-10-10 14:55:13 [3108] [3] DEBUG: Status: 202 Answer: <Sent.>
2012-10-10 14:55:13 [3108] [3] DEBUG: Delayed reply - wait for bearerbox
2012-10-10 14:55:13 [3108] [0] DEBUG: Got ACK (3) of
f70cb417-6ba2-4217-a489-19547ebe68f2
2012-10-10 14:55:13 [3108] [0] DEBUG: HTTP: Resetting HTTPClient for
`115.115.95.162'.
2012-10-10 14:55:13 [3108] [3] INFO: smsbox: Got HTTP request
</favicon.ico> from <115.115.95.162>
2012-10-10 14:55:13 [3108] [3] DEBUG: Status: 404 Answer: <Unknown request.>
2012-10-10 14:55:13 [3108] [3] DEBUG: HTTP: Resetting HTTPClient for
`115.115.95.162'.
2012-10-10 14:55:31 [3108] [3] INFO: smsbox: Got HTTP request
</cgi-bin/status> from <115.115.95.162>
2012-10-10 14:55:31 [3108] [3] DEBUG: Status: 404 Answer: <Unknown request.>
2012-10-10 14:55:31 [3108] [3] DEBUG: HTTP: Resetting HTTPClient for
`115.115.95.162'.
2012-10-10 14:56:04 [3108] [3] INFO: smsbox: Got HTTP request
</cgi-bin/status=hariom> from <115.115.95.162>
2012-10-10 14:56:04 [3108] [3] DEBUG: Status: 404 Answer: <Unknown request.>
2012-10-10 14:56:04 [3108] [3] DEBUG: HTTP: Resetting HTTPClient for
`115.115.95.162'.
2012-10-10 14:57:04 [3108] [1] DEBUG: Timeout for fd:24 appeares.
2012-10-10 14:57:04 [3108] [1] DEBUG: HTTP: Destroying HTTPClient area
0xb53005c8.
2012-10-10 14:57:04 [3108] [1] DEBUG: HTTP: Destroying HTTPClient for
`115.115.95.162'.


If anything is required from my side then let me know..


On Tue, Oct 9, 2012 at 9:42 AM, Andreas Fink <[email protected]> wrote:

> you have
>
> modemtype = Bluocean
>
> but no modem definition with that name in the config file.
> Try adding this:
>
> group = modems
> id = Bluocean
> name = Bluocean
> speed = 115200
> detect-string = "Bluocean"
> detect-string2 = ""
> init-string = "AT+CNMI=2,2,2,1,0"
> enable-hwhs = ""
> need-sleep = true
> no-pin = true
> no-smsc = false
> sendline-sleep = 100
> keepalive-cmd = "AT"
> broken = false
> message-storage = "SM"
> hardware-flow-control = false
> reset-string = "AT+CFUN=1"
>
>
> You might have to play with the init string, hardware handshake, speed
>  etc.
> Above settings is what I use with my wavecom modems which are pretty much
> following the GSM standards.
>
> Trial and error helps there. Just set it up and watch the bearerbox
> logfile to see what kannel does do when talking to the modem and how the
> modem reacts. Especially in cases where you have lots of incoming SMS or
> delivery reports.
>
> On 09.10.2012, at 06:04, virendra bhati <[email protected]> wrote:
>
> *1) do you have a manual for it?*
>
> http://www.bluocean.biz/gsm_modem.html#usb_gprs
> model 2 is the GSM modem..
>
> *2) what kind of GSM modem options have you configured?*
>
> group = core
> admin-port = 13000
> smsbox-port = 13001
> admin-password = hariom
> status-password = foo
> admin-deny-ip = ""
> admin-allow-ip = ""
> log-level = 0
> log-file = "/var/log/kannel/kannel.log"
> box-deny-ip = "*.*.*.*"
> box-allow-ip = "127.0.0.1"
> access-log = "/var/log/kannel/access.log"
> store-location= "/var/log/kannel/a-z.log"
> smsbox-max-pending = 10
> unified-prefix = "91,0091,+91,091"
>
> group = smsc
> smsc = at
> smsc-id = Bluocean
> modemtype = Bluocean
> device = /dev/ttyUSB0
>  my-number = "+6583640330"
> speed = 115200
> log-level = 0
> log-file = "/var/log/kannel/smsc.log"
>
> group = wapbox
> bearerbox-host = localhost
> log-file = "/var/log/kannel/wapbox.log"
> log-level = 0
>
> # MODEM DEFINITIONS
> group = modems
> id = wavecom
> name = "wavecom"
> detect-string = "wavecom"
> init-string = "ATZ"
> reset-string = "ATZ"
>
> group = smsbox
> bearerbox-host = localhost
> sendsms-port = 13003
> global-sender = 9718500594
> #sendsms-url = "http://localhost:13003/cgi-bin/sendsms"
> access-log = /var/log/kannel/smsaccess.log
> log-file = "/var/log/kannel/smsbox.log"
> log-level = 0
>
>
> # SEND-SMS USERS
>
> group = sendsms-user
> username = virendra
> password = bhati
>
> #---------------------------------------------
> # SERVICES
>
> group = sms-service
> keyword = default
> text = "This facility is down for maintenance."
> accept-x-kannel-headers = true
> max-messages = 1
> concatenation = true
> get-url = "
> http://localhost/playsms/plugin/gateway/kannel/geturl.php?t=%t&q=%q&a=%a"
>
> group = mysql-connection
> id = mydlr
> host = localhost
> username = root
> password =
> database = playsms
> max-connections = 1
>
> group = dlr-db
> id = mydlr
> table = dlr
> field-smsc = smsc
> field-timestamp = ts
> field-destination = destination
> field-source = source
> field-service = service
> field-url = url
> field-mask = mask
> field-status = status
> field-boxc-id = boxc3)what does the bearerbox.log say if you enable
> log-level = 0 ?
>
> *what does the bearerbox.log say if you enable log-level = 0 ?*
> Right now dedicated server center is down when come up then I will provide
> that details as well.
> On Mon, Oct 8, 2012 at 11:12 PM, Andreas Fink <[email protected]> wrote:
>
>>
>> On 08.10.2012, at 19:39, virendra bhati <[email protected]> wrote:
>>
>> Hi Team,
>>
>> I have installed Kannel and working perfectly with *Ubuntu 12.04.1 LTS*.
>> But I am not able to installed *BluOcean™ USB GSM / GPRS Modem*. Could
>> you please help me so that I will configure and used my GSM modem for
>> sending SMS from Kannel.
>>
>>
>> do you have a manual for it?
>> what kind of GSM modem options have you configured?
>> what does the bearerbox.log say if you enable log-level = 0 ?
>>
>> Usually its only a question of finding the right init strings...(which
>> can be tricky at times...)
>>
>>
>>
>>
>> --
>>
>> Thanks and regards
>>
>>  Virendra Bhati
>> +91-9718500594
>> Asterisk Developer
>> E-mail-: [email protected]
>> Skype id:- virbhati2
>> New Delhi(India)
>> [image: View my profile on LinkedIn]<http://in.linkedin.com/pub/virendra-bhati/6/a30/755>
>>
>>
>>
>
>
> --
>
> Thanks and regards
>
>  Virendra Bhati
> +91-9718500594
> Asterisk Developer
> E-mail-: [email protected]
> Skype id:- virbhati2
> New Delhi(India)
> [image: View my profile on LinkedIn]<http://in.linkedin.com/pub/virendra-bhati/6/a30/755>
>
>
>


-- 

Thanks and regards

 Virendra Bhati
+91-9718500594
Asterisk Developer
E-mail-: [email protected]
Skype id:- virbhati2
New Delhi(India)
[image: View my profile on
LinkedIn]<http://in.linkedin.com/pub/virendra-bhati/6/a30/755>

group = core
admin-port = 13000
smsbox-port = 13001
#wapbox-port= 13002
admin-password = hariom
status-password = foo
admin-deny-ip = ""
admin-allow-ip = ""
log-level = 0
log-file = "/var/log/kannel/kannel.log"
box-deny-ip = "*.*.*.*"
box-allow-ip = "127.0.0.1"
access-log = "/var/log/kannel/access.log"
store-location= "/var/log/kannel/a-z.log"
smsbox-max-pending = 10
unified-prefix = "91,0091,+91,091" 
#dlr-storage = mysql

group = smsc
smsc = at 
smsc-id = Bluocean
#modemtype = Bluocean
modemtype = auro
device = /dev/usb/hiddev0
#device = /dev/ttyUSB0
#device = /dev/ttyS0
my-number = "+6583640330"
# my-number = "+919757408157"
# sms-center = "+919810051873"
# sms-center = "+919869099994"
# sms-center = "+919892051914"
# Airtel :+919892051914"
speed = 9600                      
pin = 2345    
sim-buffering = true      
log-level = 0  
log-file = "/var/log/kannel/smsc.log"            

#group = wapbox
#bearerbox-host = localhost
#log-file = "/var/log/kannel/wapbox.log"
#log-level = 0

# MODEM DEFINITIONS
#group = modems
#id = Bluocean
#name = "Bluocean"
#detect-string = "Bluocean"
#init-string = "AT+CNMI=1,2,0,1,0"
#http://sivren.hopto.org:13003/cgi-bin/sendsms?username= init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
# init-string = "AT+CNMI=1,2,0,1,0;+CMEE=1"
# init-string = "AT+CNMI=2,1,2,0,0;+CMEE=1"
#reset-string = "ATZ" 
#message-storage = "ME"
#message-start = 1
 
group = modems
id = Bluocean
name = Bluocean
speed = 115200
detect-string = "Bluocean"
detect-string2 = ""
init-string = "AT+CNMI=2,2,2,1,0"
enable-hwhs = ""
need-sleep = true
no-pin = true
no-smsc = false
sendline-sleep = 100
keepalive-cmd = "AT"
broken = false
message-storage = "SM"
#hardware-flow-control = false
reset-string = "AT+CFUN=1"

#group=smsc
#smsc=smpp
#host=72.167.38.22
#port=9001
#receive-port= 9002
#smsc-id=BondSMS
#smsc-username = topgopub
#smsc-password = t0g0pub
#system-type = "VMA"
##system-type = "generic"
#transceiver-mode = 1
#interface-version=34
#unified-prefix = "91,0091,+91,091" 

group = smsbox
bearerbox-host = localhost
sendsms-port = 13003
global-sender = 9718500594
#sendsms-url = "http://localhost:13003/cgi-bin/sendsms"
access-log = /var/log/kannel/smsaccess.log
log-file = "/var/log/kannel/smsbox.log"
log-level = 0
#access-log = "access.log"

# SEND-SMS USERS

group = sendsms-user
username = virendra
password = bhati
#user-deny-ip = ""
#user-allow-ip = ""

#---------------------------------------------
# SERVICES

#group = sms-service
#keyword = default
#text = "This facility is down for maintenance."
#accept-x-kannel-headers = true
#max-messages = 1
#concatenation = true
#get-url = "http://localhost/playsms/plugin/gateway/kannel/geturl.php?t=%t&q=%q&a=%a"

#Fake SMSC
#group = smsc
#smsc = fake
#port = 10000
#connect-allow-ip = 127.0.0.1

#group = mysql-connection
#id = mydlr
#host = localhost
#username = root
#password = 
#database = playsms
#max-connections = 1

#group = dlr-db
#id = mydlr
#table = dlr
#field-smsc = smsc
#field-timestamp = ts
#field-destination = destination
#field-source = source
#field-service = service
#field-url = url
#field-mask = mask
#field-status = status
#field-boxc-id = boxc