Re: Problem with kannel

       Change the "esm_class" parameter sent from Kannel.

       Accepted values are 0 (Default SMSC Mode) and 3 (Store and Forward).

       Defaults to 3.

so you can use esm_class parameter to set ESM class, thanks to Alan!

2013/2/18 Alan McNatty <[email protected]>:
> Hi Rene,
>
> That's incorrect ..
>
> r4926 | amalysh | 2011-09-15 08:07:10 +1200 (Thu, 15 Sep 2011) | 3 lines
>
>     *  doc/userguide/userguide.xml, gw/smsc/smsc_smpp.c, gwlib/cfg.def:
> applied
>        patch that allows setting of esm_class in SMPP module.
>        Thanks to Alan McNatty <alan at catalyst.net.nz> for the patch.
>
> Please check the user-guide.
>
> Cheers,
> Alan
>
>
> On Sat, 2013-02-16 at 11:51 +0100, Rene Kluwen wrote:
>> You cannot change esm class by configuration.
>>
>> It’s hard coded.
>>
>> For data-coding, see the alt-dcs field.
>>
>>
>>
>> From: [email protected] [mailto:[email protected]] On
>> Behalf Of orlis moreta
>> Sent: zaterdag 2 februari 2013 1:02
>> To: Willy Mularto
>> Cc: kannel_dev_mailinglist devel@kannel. org
>> Subject: Re: Problem with kannel
>>
>>
>>
>>
>> Thanks for help
>>
>>
>>
>>
>>
>> I have an other question, i need to set Data Coding = 0x00 (SMSC
>> default Alphabet) and esm_class = 0 (Default)
>>
>>
>>
>>
>>
>> Is it possible to do that in conf file?
>>
>>
>>
>>
>>
>>
>>
>>
>>  SMPP PDU 0x97b5670 dump:
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   type_name: submit_sm
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   command_id: 4 = 0x00000004
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   command_status: 0 = 0x00000000
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   sequence_number: 3 =
>> 0x00000003
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   service_type: NULL
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   source_addr_ton: 1 =
>> 0x00000001
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   source_addr_npi: 1 =
>> 0x00000001
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   source_addr: "18299620518"
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   dest_addr_ton: 1 = 0x00000001
>>
>>
>> 2013-02-01 19:17:42 [6011] [6] DEBUG:   dest_addr_npi: 1 = 0x00000001
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   destination_addr:
>> "18299622439"
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   esm_class: 3 =
>> 0x00000003------------------------------------------------------------------->
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   protocol_id: 0 = 0x00000000
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   priority_flag: 0 = 0x00000000
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   schedule_delivery_time: NULL
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   validity_period: NULL
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   registered_delivery: 1 =
>> 0x00000001
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   replace_if_present_flag: 0 =
>> 0x00000000
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   data_coding: 241 = 0x000000f1
>>  --------------------------------------------------------------->
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   sm_default_msg_id: 0 =
>> 0x00000000
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   sm_length: 10 = 0x0000000a
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:   short_message:
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:    Octet string at 0x97b5760:
>>
>>
>> 2013-02-01 19:17:43 [6011] [6] DEBUG:      len:  10
>>
>>
>>
>>
>>
>>
>>
>>
>> Thanks
>>
>>
>> Orlis
>>
>>
>>
>>
>>
>>
>> ______________________________________________________________________
>> De: Willy Mularto <[email protected]>
>> Para: orlis moreta <[email protected]>
>> CC: "kannel_dev_mailinglist devel@kannel. org" <[email protected]>
>> Enviado: Domingo, 20 de enero, 2013 10:31 A.M.
>> Asunto: Re: Problem with kannel
>>
>>
>>
>>
>> You need to use http smsc not smpp
>>
>>
>> SlyDroid
>>
>>
>> On Jan 19, 2013 4:32 AM, "orlis moreta" <[email protected]> wrote:
>>
>>
>>
>>
>> Hi All
>>
>>
>>
>>
>>
>> I have GW 1.4-3 version installed but i'm failing to bind an SMSC.:
>>
>>
>>
>>
>>
>>
>>
>>
>> Any help would be apreciated
>>
>>
>>
>>
>>
>>
>>
>>
>>  SMPP PDU 0x9e5f740 dump:
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   type_name: bind_transceiver
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   command_id: 9 = 0x00000009
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   command_status: 0 = 0x00000000
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   sequence_number: 1 =
>> 0x00000001
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   system_id: "ivan"
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   password: "ivan1234"
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   system_type: "'VMA'"
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   interface_version: 48 =
>> 0x00000030
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   addr_ton: 0 = 0x00000000
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   addr_npi: 0 = 0x00000000
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG:   address_range: NULL
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] DEBUG: SMPP PDU dump ends.
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:
>> SMPP[SMPP:sms.secure-mytouchtone.net:9501/9501:ivan:'VMA']: Sending
>> PDU:
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG: SMPP PDU 0x9e5f888 dump:
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   type_name: bind_receiver
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   command_id: 1 = 0x00000001
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   command_status: 0 = 0x00000000
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   sequence_number: 2 =
>> 0x00000002
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   system_id: "ivan"
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   password: "ivan1234"
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   system_type: "'VMA'"
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   interface_version: 48 =
>> 0x00000030
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   addr_ton: 0 = 0x00000000
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   addr_npi: 0 = 0x00000000
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG:   address_range: NULL
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] DEBUG: SMPP PDU dump ends.
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] ERROR: SMPP: PDU length was too large
>> (1213486160, maximum is 7424).
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] ERROR:
>> SMPP[SMPP:sms.secure-mytouchtone.net:9501/9501:ivan:'VMA']: Server
>> sent garbage, ignored.
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] ERROR:
>> SMPP[SMPP:sms.secure-mytouchtone.net:9501/9501:ivan:'VMA']: I/O error
>> or other error. Re-connecting.
>>
>>
>> 2013-01-18 13:05:16 [9859] [6] ERROR:
>> SMPP[SMPP:sms.secure-mytouchtone.net:9501/9501:ivan:'VMA']: Couldn't
>> connect to SMS center (retrying in 10 seconds).
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] ERROR: SMPP: PDU length was too large
>> (1213486160, maximum is 7424).
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] ERROR:
>> SMPP[SMPP:sms.secure-mytouchtone.net:9501/9501:ivan:'VMA']: Server
>> sent garbage, ignored.
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] ERROR:
>> SMPP[SMPP:sms.secure-mytouchtone.net:9501/9501:ivan:'VMA']: I/O error
>> or other error. Re-connecting.
>>
>>
>> 2013-01-18 13:05:16 [9859] [7] ERROR:
>> SMPP[SMPP:sms.secure-mytouchtone.net:9501/9501:ivan:'VMA']: Couldn't
>> connect to SMS center (retrying in 10 seconds).
>>
>>
>>
>>
>>
>>
>>
>>
>> Thanks
>>
>>
>> orlis
>>
>>
>>
>>
>>
>
> --
> Alan McNatty
>
> e: [email protected]
> m: 64 (0) 21 02950201
> d: 64 (0) 9 9721320
> p: 64 (0) 4 4992267
>
> Catalyst IT (Auckland)
> Level 12, 48 Emily Place
> Auckland 1010
> New Zealand
>
> http://www.catalyst.net.nz
>
>