Re: Initialization of device failed Error While connecting Kannel with GSM modem

Andreas Fink <[email protected]>
Newsgroups gmane.comp.mobile.kannel.devel
Message-ID <[email protected]> 
this part hints that AT+IFC=2,2 does stop the modem from sending the data to your computer because the hardware handshake wires (RTS/CTS) are not connected and thus the modem waits on the computer to become available.

> Am 21.10.2014 um 05:54 schrieb Anjaly Kurian <[email protected]>:
> 
> 2014-10-21 09:00:37 [5744] [6] DEBUG: AT2[simcom]: --> AT+IFC=2,2^M
> 2014-10-21 09:00:44 [5744] [6] INFO: AT2[simcom]: cannot enable hardware handshake




Andreas Fink
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.