Re: Portech MV-37x patch

Am 13.11.2014 14:48, schrieb Anton Osennikov:
> 13.11.2014 17:50, Stipe Tolj пишет:
>> Am 12.11.2014 18:42, schrieb Anton Osennikov:
>>>
>>> Hello.
>>>
>>> Here was another try to solve the same problem, for ALLVoIP
>>> AV3402 device. The device looks the same: same additional command, same
>>> additional response.
>>>
>>> http://www.mail-archive.com/[email protected]/msg11934.html
>>
>> Hi Anton,
>>
>> thanks a lot for the input here.
>>
>> Just to get you right, adding your patch to support \r escape codes
>> would solve both plaform requirements in terms of adding more input on
>> the AT command interface?
>
> It does so for ALLVoIP AV3402 device. We successfully use this patch
> with this device for several months now.
>
> I hope the patch will also work for Portech MV-37x devices, since
> additional prompts and responses are very similar.
>
> Here's log with "module1" command embedded into smsc-password:
>
> smsc-password = "23*****74\r\nmodule1"
>
> 2014-11-13 18:37:17 [9295] [7] INFO: AT2[mts]: opening device
> 2014-11-13 18:37:17 [9295] [7] DEBUG: Connecting to <93.191.111.114>
> 2014-11-13 18:37:17 [9295] [7] DEBUG: AT2[mts]: device opened. Telnet
> mode = 0
> 2014-11-13 18:37:17 [9295] [7] INFO: AT2[mts]: Logging in
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <--
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- >
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: --> voip^M
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- sername: voip>
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: --> 23*****74
> module1^M
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- password: **********
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- user level = admin.
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- command: logout,
> module1, module2, state1, state2, info.
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- ]
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- module1
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- getting module 1 ...
> 2014-11-13 18:37:18 [9295] [7] DEBUG: AT2[mts]: <-- got!! press 'ctrl-x'
> to release module 1.
> 2014-11-13 18:37:22 [9295] [7] DEBUG: AT2[mts]: --> AT^M
> 2014-11-13 18:37:23 [9295] [7] DEBUG: AT2[mts]: <-- 0

thanks Anton.

Ariel, does this work for the Portech platform too?

Stipe

-- 
-------------------------------------------------------------------
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany

tolj.org system architecture      Kannel Software Foundation (KSF)
http://www.tolj.org/              http://www.kannel.org/

mailto:st_{at}_tolj.org           mailto:stolj_{at}_kannel.org
-------------------------------------------------------------------