Re: USSD connection problem

On Tue, 2015-02-10 at 19:14, mohammad hossein shafinia wrote:
> We have installed Kannel 1.5.0 to resolve connecting with USSD via TLV.
> 
> With this version SMSbox and bearbox didn't stopped and we connected to
> USSD gateway.
> 
> But unfortunately we can't receive any USSD request.

I don't know if USSD can be over SMPP in Kannel. It can be sent over
modem, IIRC.

> Would you please help us and share with us a sample config file.

As I told in my previous mail, I don't use Kannel anymore so I cannot
help you with your problem.

> Please find our config file in the attachment.
> On Sat, Feb 7, 2015 at 4:34 PM, Milan P. Stanic <[email protected]> wrote:
> 
> > On Sat, 2015-02-07 at 16:06, mohammad hossein shafinia wrote:
> > > Thank you so much for your helpful comment.
> > >
> > > Also would you please let us know if the config file is OK?
> >
> > I don't use (unfortunately) Kannel for more than two years so I cannot
> > tell much about your config.
> > Upgrade Kannel to one of the newer version and test it. If it does not
> > work then post your log and config, so someone else could help you, I
> > hope.
> >
> > > On Sat, Feb 7, 2015 at 3:42 PM, Milan P. Stanic <[email protected]> wrote:
> > > > On Sat, 2015-02-07 at 12:47, mohammad hossein shafinia wrote:
> > > > [...]
> > > > > However, I want to develop an application to connect to USSD. But I
> > don't
> > > > > know how do I configure (kannel.conf) to connect to USSD. First we
> > > > changed
> > > > > the configuration of kannel.conf similar to what we done for SMS,
> > then
> > > > > restarted Kannel and we was connected to USSD server, but we couldn't
> > > > send
> > > > > or receive any USSD transaction. After that we searched more and
> > find a
> > > > > parameter named TLV and changed the parameter based on that, but
> > after
> > > > > restarting the Kannel, SMSbox and bearbox just stopped.
> > > > >
> > > > > Can you give me a sample of kannel.conf for connection to USSD ?
> > > > >
> > > > > Also please find the current config file that we are using now in the
> > > > > attachment. Please let me know how we have to change that config
> > file.
> > > > >
> > > > > Version: Kannel bearerbox version `1.4.1'.
> > > >
> > > > Kannel version 1.4.1 does not support TLVs, IIRC.
> > > >
> > > > You should use 1.4.4 or 1.5.0 (or even SVN) version not just because of
> > > > TLVs but because 1.4.1 is really old and lots of bugs are fixed in
> > newer
> > > > versions.

-- 
Kind regards,  Milan
--------------------------------------------------
Arvanta,        http://www.arvanta.net
Please do not send me e-mail containing HTML code or documents in
proprietary format (word, excel, pps and so on)