Re: Inverted Exclamation mark and question mark issue.
Davor Spasoski <[email protected]>
| Newsgroups | gmane.comp.mobile.kannel.user |
|---|---|
| Message-ID | <[email protected]> |
Do you mean you get “@“ for any of the "¤¡ÄÖÑܧ¿äöñüà" or just for “¡” ? If so, the SMPP part of the SMSC does some strange character conversions. From my experience, the SMSC usually sets some sort of ISO-8859-1 as a default alphabet on SMPP level and than converts (with losses) to GSM alphabet. GSM 7-bit is usually supported with DCS above 240 so try setting alt-dcs =1, coding = 0 and charset left blank (utf-8). Lately, some SMSCs support UTF-8 as default and even something called "Esaped-Latin-1" or "X-ISO-8859-GSM-escaped" for which I could not find any standardization, but that is basically an 8-bit alphabet, having the common GSM/ASCII characters plus the extension with the GSM only characters. In order to support that, you will need a custom charset translation on your side. Try the alt-dcs with coding=0 and if not successful, ask to set the default SMSC/SMPP alphabet as GSM. BR, Davor On Apr 5, 2018, at 4:56 AM, Wan Md Arif Noor Bin. Wan Nizam <[email protected] > wrote: Hi All, Thanks for the response, I have removed alt-charset from the config but now all I get is @. curl http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=601132495424&text=%C2%A1&coding=0 curl http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=601132495424&text=%C2%A1&charset=UTF-8 curl http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=601132495424&text=%A1&charset=ISO-8859-1 2018-04-05 10:21:02 [16025] [7] DEBUG: SMPP PDU 0x7f69dc000a10 dump: 2018-04-05 10:21:02 [16025] [7] DEBUG: type_name: submit_sm 2018-04-05 10:21:02 [16025] [7] DEBUG: command_id: 4 = 0x00000004 2018-04-05 10:21:02 [16025] [7] DEBUG: command_status: 0 = 0x00000000 2018-04-05 10:21:02 [16025] [7] DEBUG: sequence_number: 31 = 0x0000001f 2018-04-05 10:21:02 [16025] [7] DEBUG: service_type: NULL 2018-04-05 10:21:02 [16025] [7] DEBUG: source_addr_ton: 0 = 0x00000000 2018-04-05 10:21:02 [16025] [7] DEBUG: source_addr_npi: 1 = 0x00000001 2018-04-05 10:21:02 [16025] [7] DEBUG: source_addr: "68888" 2018-04-05 10:21:02 [16025] [7] DEBUG: dest_addr_ton: 1 = 0x00000001 2018-04-05 10:21:02 [16025] [7] DEBUG: dest_addr_npi: 1 = 0x00000001 2018-04-05 10:21:02 [16025] [7] DEBUG: destination_addr: "601132495424" 2018-04-05 10:21:02 [16025] [7] DEBUG: esm_class: 3 = 0x00000003 2018-04-05 10:21:02 [16025] [7] DEBUG: protocol_id: 0 = 0x00000000 2018-04-05 10:21:02 [16025] [7] DEBUG: priority_flag: 0 = 0x00000000 2018-04-05 10:21:02 [16025] [7] DEBUG: schedule_delivery_time: NULL 2018-04-05 10:21:02 [16025] [7] DEBUG: validity_period: NULL 2018-04-05 10:21:02 [16025] [7] DEBUG: registered_delivery: 0 = 0x00000000 2018-04-05 10:21:02 [16025] [7] DEBUG: replace_if_present_flag: 0 = 0x00000000 2018-04-05 10:21:02 [16025] [7] DEBUG: data_coding: 0 = 0x00000000 2018-04-05 10:21:02 [16025] [7] DEBUG: sm_default_msg_id: 0 = 0x00000000 2018-04-05 10:21:02 [16025] [7] DEBUG: sm_length: 1 = 0x00000001 2018-04-05 10:21:02 [16025] [7] DEBUG: short_message: "@" 2018-04-05 10:21:02 [16025] [7] DEBUG: SMPP PDU dump ends. Tested all the character of GSM only @£$¥èéùìòÇØøÅåΔ_ΦΓΛΩΠΨΣΘΞ^{}\[~]|€ÆæßÉ!\"#%&'()*+,-./:;<=>? Is working while the ¤¡ÄÖÑܧ¿äöñüà is not regardless of charset used in the parameter. ¤¡ÄÖÑܧ¿äöñüà curl http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=601132495424&text=%C2%A4%C2%A1%C3%84%C3%96%C3%91%C3%9C%C2%A7%C2%BF%C3%A4%C3%B6%C3%B1%C3%BC%C3%A0 2018-04-05 10:54:07 [16129] [7] DEBUG: SMPP PDU 0x7f09c8000a10 dump: 2018-04-05 10:54:07 [16129] [7] DEBUG: type_name: submit_sm 2018-04-05 10:54:07 [16129] [7] DEBUG: command_id: 4 = 0x00000004 2018-04-05 10:54:07 [16129] [7] DEBUG: command_status: 0 = 0x00000000 2018-04-05 10:54:07 [16129] [7] DEBUG: sequence_number: 56 = 0x00000038 2018-04-05 10:54:07 [16129] [7] DEBUG: service_type: NULL 2018-04-05 10:54:07 [16129] [7] DEBUG: source_addr_ton: 0 = 0x00000000 2018-04-05 10:54:07 [16129] [7] DEBUG: source_addr_npi: 1 = 0x00000001 2018-04-05 10:54:07 [16129] [7] DEBUG: source_addr: "68888" 2018-04-05 10:54:07 [16129] [7] DEBUG: dest_addr_ton: 1 = 0x00000001 2018-04-05 10:54:07 [16129] [7] DEBUG: dest_addr_npi: 1 = 0x00000001 2018-04-05 10:54:07 [16129] [7] DEBUG: destination_addr: "601132495424" 2018-04-05 10:54:07 [16129] [7] DEBUG: esm_class: 3 = 0x00000003 2018-04-05 10:54:07 [16129] [7] DEBUG: protocol_id: 0 = 0x00000000 2018-04-05 10:54:07 [16129] [7] DEBUG: priority_flag: 0 = 0x00000000 2018-04-05 10:54:07 [16129] [7] DEBUG: schedule_delivery_time: NULL 2018-04-05 10:54:07 [16129] [7] DEBUG: validity_period: NULL 2018-04-05 10:54:07 [16129] [7] DEBUG: registered_delivery: 0 = 0x00000000 2018-04-05 10:54:07 [16129] [7] DEBUG: replace_if_present_flag: 0 = 0x00000000 2018-04-05 10:54:07 [16129] [7] DEBUG: data_coding: 0 = 0x00000000 2018-04-05 10:54:07 [16129] [7] DEBUG: sm_default_msg_id: 0 = 0x00000000 2018-04-05 10:54:07 [16129] [7] DEBUG: sm_length: 13 = 0x0000000d 2018-04-05 10:54:07 [16129] [7] DEBUG: short_message: 2018-04-05 10:54:07 [16129] [7] DEBUG: Octet string at 0x7f09c8000c70: 2018-04-05 10:54:07 [16129] [7] DEBUG: len: 13 2018-04-05 10:54:07 [16129] [7] DEBUG: size: 27 2018-04-05 10:54:07 [16129] [7] DEBUG: immutable: 0 2018-04-05 10:54:07 [16129] [7] DEBUG: data: 24 40 5b 5c 5d 5e 5f 60 7b 7c 7d 7e 7f $@[\]^_`{|}~. 2018-04-05 10:54:07 [16129] [7] DEBUG: Octet string dump ends. 2018-04-05 10:54:07 [16129] [7] DEBUG: SMPP PDU dump ends. Kindly do let me know if there’s anything else that I can try, appreciate it. Regards Arif Noor From: Alexander Malysh <[email protected] > On Behalf Of [email protected] Sent: Wednesday, April 04, 2018 11:46 PM To: Wan Md Arif Noor Bin. Wan Nizam <[email protected] > Cc: [email protected] Subject: Re: Inverted Exclamation mark and question mark issue. This is in most cases wrong: 2018-04-04 17:17:39 [10745] [7] DEBUG: short_message: 2018-04-04 17:17:39 [10745] [7] DEBUG: Octet string at 0x7efe78000c40: 2018-04-04 17:17:39 [10745] [7] DEBUG: len: 2 2018-04-04 17:17:39 [10745] [7] DEBUG: size: 3 2018-04-04 17:17:39 [10745] [7] DEBUG: immutable: 0 2018-04-04 17:17:39 [10745] [7] DEBUG: data: c2 a1 .. 2018-04-04 17:17:39 [10745] [7] DEBUG: Octet string dump ends. You are sending as UTF-8. Please align your alt-charset with a smsc default charset. dest-addr-ton = 1 dest-addr-npi = 1 interface-version = 52 throughput = 15 alt-charset = "utf-8" ^^^^^^^^^ Thanks, Alex Am 04.04.2018 um 12:24 schrieb Wan Md Arif Noor Bin. Wan Nizam <[email protected] >: Hi There, Thanks for replying, I already tested using that parameter, but I keep receiving “B?”. Below are the debug log. curl " http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=601132495424&text=%C2%A1&coding=0&charset=UTF-8 " 2018-04-04 17:17:39 [10745] [7] DEBUG: SMPP PDU 0x7efe78000a10 dump: 2018-04-04 17:17:39 [10745] [7] DEBUG: type_name: submit_sm 2018-04-04 17:17:39 [10745] [7] DEBUG: command_id: 4 = 0x00000004 2018-04-04 17:17:39 [10745] [7] DEBUG: command_status: 0 = 0x00000000 2018-04-04 17:17:39 [10745] [7] DEBUG: sequence_number: 56414 = 0x0000dc5e 2018-04-04 17:17:39 [10745] [7] DEBUG: service_type: NULL 2018-04-04 17:17:39 [10745] [7] DEBUG: source_addr_ton: 0 = 0x00000000 2018-04-04 17:17:39 [10745] [7] DEBUG: source_addr_npi: 1 = 0x00000001 2018-04-04 17:17:39 [10745] [7] DEBUG: source_addr: "68888" 2018-04-04 17:17:39 [10745] [7] DEBUG: dest_addr_ton: 1 = 0x00000001 2018-04-04 17:17:39 [10745] [7] DEBUG: dest_addr_npi: 1 = 0x00000001 2018-04-04 17:17:39 [10745] [7] DEBUG: destination_addr: "601132495424" 2018-04-04 17:17:39 [10745] [7] DEBUG: esm_class: 3 = 0x00000003 2018-04-04 17:17:39 [10745] [7] DEBUG: protocol_id: 0 = 0x00000000 2018-04-04 17:17:39 [10745] [7] DEBUG: priority_flag: 0 = 0x00000000 2018-04-04 17:17:39 [10745] [7] DEBUG: schedule_delivery_time: NULL 2018-04-04 17:17:39 [10745] [7] DEBUG: validity_period: NULL 2018-04-04 17:17:39 [10745] [7] DEBUG: registered_delivery: 0 = 0x00000000 2018-04-04 17:17:39 [10745] [7] DEBUG: replace_if_present_flag: 0 = 0x00000000 2018-04-04 17:17:39 [10745] [7] DEBUG: data_coding: 0 = 0x00000000 2018-04-04 17:17:39 [10745] [7] DEBUG: sm_default_msg_id: 0 = 0x00000000 2018-04-04 17:17:39 [10745] [7] DEBUG: sm_length: 2 = 0x00000002 2018-04-04 17:17:39 [10745] [7] DEBUG: short_message: 2018-04-04 17:17:39 [10745] [7] DEBUG: Octet string at 0x7efe78000c40: 2018-04-04 17:17:39 [10745] [7] DEBUG: len: 2 2018-04-04 17:17:39 [10745] [7] DEBUG: size: 3 2018-04-04 17:17:39 [10745] [7] DEBUG: immutable: 0 2018-04-04 17:17:39 [10745] [7] DEBUG: data: c2 a1 .. 2018-04-04 17:17:39 [10745] [7] DEBUG: Octet string dump ends. 2018-04-04 17:17:39 [10745] [7] DEBUG: SMPP PDU dump ends. However it works correctly when sending with coding=2, but by using that it halved the SMS length. Appreciate your help in this. Cheers, Arif Noor From: Alexander Malysh <[email protected] > On Behalf Of [email protected] Sent: Wednesday, April 04, 2018 4:40 PM To: Wan Md Arif Noor Bin. Wan Nizam <[email protected] > Cc: [email protected] Subject: Re: Inverted Exclamation mark and question mark issue. Hi, you have to send in UTF-8 with coding=0 (for inverted exclamation mark: text=%C2%A1&coding=0). If it doesn’t work please check your smpp debug logs and check if submit_sm has correct values in message body and if yes then SMSC doing something wrong. Thanks, Alex Am 04.04.2018 um 07:27 schrieb Wan Md Arif Noor Bin. Wan Nizam <[email protected] >: Hello Users, I’m having an issue with sending both inverted exclamation mark (¡) and inverted question mark (¿) , it seems like it was converted to B! and B? instead. Tried with all below parameter but none working except for UCS-2 which I want to avoid. curl "http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=60113******&text=¿ " Result : B? curl " http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=60113******&text=%C2%BF " Result :B? curl "http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=60113******&text=¿&coding=0&alt-dcs=1 " Result : ‘ curl " http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=60113******&text=%C2%BF&coding=0&alt-dcs=1 " Result : ‘ curl "http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=60113******&text=¿&coding=0&alt-dcs=0 " Result : B? curl " http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=60113******&text=%C2%BF&coding=0&alt-dcs=0 " Result : B? curl "http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=60113******&text=¿&coding=0&charset=ISO-8859-1&alt-dcs=1 "Result : ?’ curl "http://localhost:13017/cgi-bin/sendsms?username=smsSMPP2&password=smsPass&from=68888&to=60113******&text=¿&coding=0&charset=ISO-8859-1&alt-dcs=1 "Result : ?’ Tried with charset UTF-8 and ASCII, but same with same result. Please advise what else can be done to get this working? Config: group = core admin-port = 13005 smsbox-port = 13007 sms-resend-retry = 10 admin-password = admin box-deny-ip = "*.*.*.*" box-allow-ip = "" access-log = /opt/kannel/smpp_access.log access-log-format = "[SMSC:%i] [from:%p] [to:%P] [msg:%L:%b] [FID:%F]" store-type = file store-location = "/opt/kannel/smpp.store" store-dump-freq = 100 group = smsbox bearerbox-host = 127.0.0.1 sendsms-port = 13017 http-request-retry = 3 http-queue-delay = 5 reply-couldnotfetch = "Please wait" log-file = "/opt/kannel/smsbox/smsbox.log" log-level = 0 group = smsc smsc = smpp smsc-id = smppConnection2 allowed-smsc-id = "smppConnection2" host = port = system-type = "" address-range = "1234" smsc-username = "" smsc-password = "" source-addr-ton = 0 source-addr-npi = 1 dest-addr-ton = 1 dest-addr-npi = 1 interface-version = 52 throughput = 15 alt-charset = "utf-8" connection-timeout = 60 max-pending-submits = 10 enquire-link-interval = 20 transceiver-mode = 0 log-file = "/opt/kannel/bearerbox/debug.log" log-level = 0 reconnect-delay = 2 group = sendsms-user username = smsSMPP2 password = smsPass max-messages = 10 concatenation = true default-smsc = smppConnection2 group = sms-service keyword = default accepted-smsc = smppConnection2 get-url = " max-messages = 0 concatenation = true ---------- Disclaimer: one.Vip DOOEL Skopje This e-mail (including any attachments) is confidential and may be protected by legal privilege. If you are not the intended recipient, you should not copy it, re-transmit it, use it or disclose its contents, but should return it to the sender immediately and delete your copy from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change. one.Vip DOOEL Skopje shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. Please, do not print this e-mail unless it is necessary! Think about saving the environment! Напомена: оне.Вип ДООЕЛ Скопје Оваа електронска порака (вклучувајќи ги и прилозите) е доверлива и може да биде заштитена со правни привилегии. Доколку не сте лицето на кое таа му е наменета пораката, не треба да ја копирате, дистрибуирате или да ја откривате нејзината содржина, туку веднаш да ја препратите до испраќачот и да ја избришете оригиналната порака и сите нејзини копии од Вашиот компјутерски систем. Секое неовластено користење на оваа порака во целост или делови од истата е строго забрането. Ве молиме да забележите дека електронските пораки се подложни на промени. оне.Вип ДООЕЛ Скопје не презема одговорност за несоодветно или нецелосно пренесување на информациите содржани во оваа комуникација, ниту пак за било какво задоцнување на приемот или оштетувања на вашиот систем. Ве молиме не ја печатете оваа порака освен ако не е неопходно! Зачувајте ја природата!