Re: Kannel 1.4.5 migration

Hi Ron

The problem is with your smpp configuration, not kannel itself.

As the error said, now SMPP must have a setup of TX and RX in separate
blocks. Check user manual for details.

Regards,

Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
              Visitenos en www.perusms.com


Le jeu. 29 nov. 2018 à 17:24, Ron Rechtman <[email protected]> a
écrit :

> So basically it is the same instructions…what it did give is a way to see
> more info…
>
>
>
> 2018-11-29 17:16:53 [62770] [0] ERROR: SMPP: Configuration file can only
> have port or receive-port. Usage of both in one group is deprecated!
>
> 2018-11-29 17:16:53 [62770] [0] PANIC: Cannot start with SMSC connection
> failing
>
> 2018-11-29 17:16:53 [62770] [0] PANIC:
> /usr/local/sbin/bearerbox(gw_backtrace+0xae) [0x4899be]
>
> 2018-11-29 17:16:53 [62770] [0] PANIC:
> /usr/local/sbin/bearerbox(gw_panic+0x15f) [0x489b2f]
>
> 2018-11-29 17:16:53 [62770] [0] PANIC:
> /usr/local/sbin/bearerbox(smsc2_start+0x5ee) [0x41a6ce]
>
> 2018-11-29 17:16:53 [62770] [0] PANIC:
> /usr/local/sbin/bearerbox(main+0xf84) [0x40ee34]
>
> 2018-11-29 17:16:53 [62770] [0] PANIC:
> /lib64/libc.so.6(__libc_start_main+0xf5) [0x7fb181ead445]
>
> 2018-11-29 17:16:53 [62770] [0] PANIC: /usr/local/sbin/bearerbox()
> [0x40f11a]
>
>
>
>
>
> So my provider has different ports. It seems breaking it up works. I’ll do
> more testing tomorrow
>
> Thank you!
>
>
>
> *From:* Web Min <[email protected]>
> *Sent:* Thursday, November 29, 2018 4:11 PM
> *To:* Ron Rechtman <[email protected]>
> *Cc:* [email protected]
> *Subject:* Re: Kannel 1.4.5 migration
>
>
>
> try to follow the below link:
>
>
>
>
> http://www.sabinshrestha.com.np/linux-downloads/centos-7-kannel-1-4-5-and-mariadb-10-3-install-and-configure-2018/
>
>
>
> Good night
>
>
>
> On Thu, Nov 29, 2018 at 11:56 PM Ron Rechtman <[email protected]>
> wrote:
>
> I don’t follow
>
> export WANT_AUTOMAKE=1.8
>
> change to
>
> export WANT_AUTOMAKE=1.13.4
>
> ?
>
>
>
> I still end up with the same errors
>
>
>
>
>
>
>
>
>
> *From:* Web Min <[email protected]>
> *Sent:* Thursday, November 29, 2018 3:55 PM
> *To:* Ron Rechtman <[email protected]>
> *Cc:* [email protected]
> *Subject:* Re: Kannel 1.4.5 migration
>
>
>
> Better to update the version of Automake via the bootstrap file instead
>
>
>
> On Thu, Nov 29, 2018 at 11:51 PM Ron Rechtman <[email protected]>
> wrote:
>
> I left C/linux in 2000 when I got my Comp Eng. Degree.
>
> After that it has been mostly Microsoft & moved to C#.
>
>
>
> So you’ll have to be a bit patient with me
>
>
>
> Automake = 1.13.4
>
>
>
> So I tried edited the config.ac file…
>
> Seems quite a bit of changes in the INIT need to be done.
>
>
>
> Better Ideas?
>
>
>
>
>
> *From:* Web Min <[email protected]>
> *Sent:* Thursday, November 29, 2018 3:36 PM
> *To:* Ron Rechtman <[email protected]>
> *Cc:* [email protected]
> *Subject:* Re: Kannel 1.4.5 migration
>
>
>
> I don't have much experience with kannel under CentOS, but my experience
> under Ubuntu.
>
>
>
> try check the automake version to match it with bootstrap
>
> automake --version | sed -e '1s/[^0-9]*//' -e q
>
>
>
>
>
> On Thu, Nov 29, 2018 at 11:30 PM Ron Rechtman <[email protected]>
> wrote:
>
>
>
>
>
> *From:* Web Min <[email protected]>
> *Sent:* Thursday, November 29, 2018 3:29 PM
> *To:* Ron Rechtman <[email protected]>
> *Cc:* [email protected]
> *Subject:* Re: Kannel 1.4.5 migration
>
>
>
> Glad to hear it! What is the full log of installation?
>
>
>
> On Thu, Nov 29, 2018 at 11:26 PM Ron Rechtman <[email protected]>
> wrote:
>
> First off thanks for the super fast replies.
>
>
>
> The bootstrap didn’t give errors now
>
> But ended up with the same error
>
>
>
>
>
>
>
>
>
> *From:* Web Min <[email protected]>
> *Sent:* Thursday, November 29, 2018 3:21 PM
> *To:* Ron Rechtman <[email protected]>
> *Cc:* [email protected]
> *Subject:* Re: Kannel 1.4.5 migration
>
>
>
> try the below first
>
>
>
> mv configure.in configure.ac
>
> ./bootstrap
>
>
>
> then make
>
> make install
>
>
>
> On Thu, Nov 29, 2018 at 11:17 PM Ron Rechtman <[email protected]>
> wrote:
>
> I followed instructions
>
> https://blog.onesconsultants.com/2018/08/how-to-install-kannel-in-centos-7.html
>
> But pulling 1.4.5
>
> Applied patch
>
> https://redmine.kannel.org/issues/699
>
>
>
> & my config file
>
>
>
> I ran the .sh file, but guessing the earlier make install broke it?
>
>
>
> [root@sms-2 gateway-1.4.5]# ./bootstrap.sh
>
> + export WANT_AUTOMAKE=1.8
>
> + WANT_AUTOMAKE=1.8
>
> ++ which glibtoolize
>
> which: no glibtoolize in
> (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin)
>
> + libtoolize --copy --automake --force
>
> + aclocal
>
> aclocal: warning: autoconf input should be named 'configure.ac', not '
> configure.in'
>
> + autoheader
>
> autoheader: warning: missing template: ENABLE_COOKIES
>
> autoheader: Use AC_DEFINE([ENABLE_COOKIES], [], [Description])
>
> autoheader: warning: missing template: GW_NAME
>
> autoheader: warning: missing template: GW_VERSION
>
> autoheader: warning: missing template: HAVE_CASS
>
> autoheader: warning: missing template: HAVE_FUNC_GETHOSTBYNAME_R_3
>
> autoheader: warning: missing template: HAVE_FUNC_GETHOSTBYNAME_R_5
>
> autoheader: warning: missing template: HAVE_FUNC_GETHOSTBYNAME_R_6
>
> autoheader: warning: missing template: HAVE_GSOAP
>
> autoheader: warning: missing template: HAVE_MYSQL
>
> autoheader: warning: missing template: HAVE_NFTW
>
> autoheader: warning: missing template: HAVE_PCRE
>
> autoheader: warning: missing template: HAVE_PGSQL
>
> autoheader: warning: missing template: HAVE_PTHREAD_RWLOCK
>
> autoheader: warning: missing template: HAVE_PTHREAD_SPINLOCK_T
>
> autoheader: warning: missing template: HAVE_REDIS
>
> autoheader: warning: missing template: HAVE_REGEX
>
> autoheader: warning: missing template: HAVE_SDB
>
> autoheader: warning: missing template: HAVE_SEMAPHORE
>
> autoheader: warning: missing template: HAVE_SQLITE
>
> autoheader: warning: missing template: HAVE_SQLITE3
>
> autoheader: warning: missing template: HAVE_UCONTEXT
>
> autoheader: warning: missing template: HAVE_WTLS_OPENSSL
>
> autoheader: warning: missing template: HAVE___FUNCTION__
>
> autoheader: warning: missing template: HAVE___FUNC__
>
> autoheader: warning: missing template: LIBPCRE_VERSION
>
> autoheader: warning: missing template: LIBSDB_VERSION
>
> autoheader: warning: missing template: LOG_TIMESTAMP_LOCALTIME
>
> autoheader: warning: missing template: MUTEX_STATS
>
> autoheader: warning: missing template: NO_GWASSERT
>
> autoheader: warning: missing template: NO_SMS
>
> autoheader: warning: missing template: NO_WAP
>
> autoheader: warning: missing template: SUFFIX
>
> autoheader: warning: missing template: USE_GWMEM_CHECK
>
> autoheader: warning: missing template: USE_GWMEM_NATIVE
>
> autoheader: warning: missing template: USE_GWMEM_SLOW
>
> autoheader: warning: missing template: USE_KEEPALIVE
>
> autoheader: warning: missing template: WS_DEBUG
>
> + automake --add-missing --copy --gnu
>
> automake: warning: autoconf input should be named 'configure.ac', not '
> configure.in'
>
> configure.in:89: warning: AM_INIT_AUTOMAKE: two- and three-arguments
> forms are deprecated.  For more info, see:
>
> configure.in:89:
> http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
>
> automake: warning: autoconf input should be named 'configure.ac', not '
> configure.in'
>
> + autoconf
>
>
>
> So I decided to try again
>
> Deleted everything
>
>
>
> Sudo wget http://www.kannel.org/download/1.4.5/gateway-1.4.5.tar.gz
>
> sudo tar -zxvf gateway-1.4.5.tar.gz
>
>
>
> and had the same warnings as above
>
>
>
> sudo ./configure  --prefix=/etc/kannel --enable-start-stop-daemon
>
> sudo make gives error…
>
>
>
> sudo make clean
>
> apply patch from https://redmine.kannel.org/issues/699
>
> [root@sms-2 gateway-1.4.5]# patch < gateway-1.4.5.patch -p1
>
> patching file wmlscript/wsgram.y
>
> patching file wmlscript/wsint.h
>
> patching file wmlscript/wslexer.c
>
>
>
> sudo make
>
> sudo make install
>
>
>
> service kannel start (with my config file)
>
> and same error
>
>
>
> 2018-11-29 15:15:43 [40483] [0] PANIC: Cannot start with SMSC connection
> failing
>
> 2018-11-29 15:15:43 [40483] [0] PANIC:
> /etc/kannel/sbin/bearerbox(gw_backtrace+0xae) [0x49840e]
>
> 2018-11-29 15:15:43 [40483] [0] PANIC:
> /etc/kannel/sbin/bearerbox(gw_panic+0x15f) [0x49857f]
>
> 2018-11-29 15:15:43 [40483] [0] PANIC:
> /etc/kannel/sbin/bearerbox(smsc2_start+0x5ee) [0x418eae]
>
> 2018-11-29 15:15:43 [40483] [0] PANIC:
> /etc/kannel/sbin/bearerbox(main+0xed4) [0x40d8f4]
>
> 2018-11-29 15:15:43 [40483] [0] PANIC:
> /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f03ded88445]
>
> 2018-11-29 15:15:43 [40483] [0] PANIC: /etc/kannel/sbin/bearerbox()
> [0x40db86]
>
> 2018-11-29 15:15:53 [40498] [0] PANIC: Cannot start with SMSC connection
> failing
>
> 2018-11-29 15:15:53 [40498] [0] PANIC:
> /etc/kannel/sbin/bearerbox(gw_backtrace+0xae) [0x49840e]
>
> 2018-11-29 15:15:53 [40498] [0] PANIC:
> /etc/kannel/sbin/bearerbox(gw_panic+0x15f) [0x49857f]
>
> 2018-11-29 15:15:53 [40498] [0] PANIC:
> /etc/kannel/sbin/bearerbox(smsc2_start+0x5ee) [0x418eae]
>
> 2018-11-29 15:15:53 [40498] [0] PANIC:
> /etc/kannel/sbin/bearerbox(main+0xed4) [0x40d8f4]
>
> 2018-11-29 15:15:53 [40498] [0] PANIC:
> /lib64/libc.so.6(__libc_start_main+0xf5) [0x7efeafc29445]
>
> 2018-11-29 15:15:53 [40498] [0] PANIC: /etc/kannel/sbin/bearerbox()
> [0x40db86]
>
>
>
> *From:* Web Min <[email protected]>
> *Sent:* Thursday, November 29, 2018 2:44 PM
> *To:* Ron Rechtman <[email protected]>
> *Cc:* [email protected]
> *Subject:* Re: Kannel 1.4.5 migration
>
>
>
> It seems you have a problem in so file  as mentioned below
>
>
>
> /lib64/libc.so.6
>
>
>
> Did you install the Kannel via source? if yes make sure to run the
> bootrtap.sh first
>
>
>
> Regards
>
>
>
> On Thu, Nov 29, 2018 at 10:41 PM Ron Rechtman <[email protected]>
> wrote:
>
>
>
> Hello,
>
>
>
> I have 1.4.3 running no problem on Cent 6.6
>
>
> I have built a new box with Cent 7 and 1.4.5 and I cannot get it to run.
>
>
>
> I have installed Kannel, and used the same CONFIG from the 1.4.3 and get
> errors.
>
>
>
>
>
> 2018-11-29 14:27:51 [29716] [0] PANIC: Cannot start with SMSC connection
> failing
>
> 2018-11-29 14:27:51 [29716] [0] PANIC:
> /etc/kannel/sbin/bearerbox(gw_backtrace+0xae) [0x49840e]
>
> 2018-11-29 14:27:51 [29716] [0] PANIC:
> /etc/kannel/sbin/bearerbox(gw_panic+0x15f) [0x49857f]
>
> 2018-11-29 14:27:51 [29716] [0] PANIC:
> /etc/kannel/sbin/bearerbox(smsc2_start+0x5ee) [0x418eae]
>
> 2018-11-29 14:27:51 [29716] [0] PANIC:
> /etc/kannel/sbin/bearerbox(main+0xed4) [0x40d8f4]
>
> 2018-11-29 14:27:51 [29716] [0] PANIC:
> /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f197d2de445]
>
> 2018-11-29 14:27:51 [29716] [0] PANIC: /etc/kannel/sbin/bearerbox()
> [0x40db86]
>
> 2018-11-29 14:28:51 [29738] [0] PANIC: Cannot start with SMSC connection
> failing
>
> 2018-11-29 14:28:51 [29738] [0] PANIC:
> /etc/kannel/sbin/bearerbox(gw_backtrace+0xae) [0x49840e]
>
> 2018-11-29 14:28:51 [29738] [0] PANIC:
> /etc/kannel/sbin/bearerbox(gw_panic+0x15f) [0x49857f]
>
> 2018-11-29 14:28:51 [29738] [0] PANIC:
> /etc/kannel/sbin/bearerbox(smsc2_start+0x5ee) [0x418eae]
>
> 2018-11-29 14:28:51 [29738] [0] PANIC:
> /etc/kannel/sbin/bearerbox(main+0xed4) [0x40d8f4]
>
> 2018-11-29 14:28:51 [29738] [0] PANIC:
> /lib64/libc.so.6(__libc_start_main+0xf5) [0x7fd5d78e9445]
>
> 2018-11-29 14:28:51 [29738] [0] PANIC: /etc/kannel/sbin/bearerbox()
> [0x40db86]
>
>
>
> Some guidance would be appreciated.
>
>
>
> Thank you,
>
>
>
> Ron
>
>