Re: SMSC - Maximum retries for message exceeded, discarding it!

Hi Rene,

Thanks for quick response.

You mean that the " Maximum retries for message exceeded, discarding it! "
is coming from SMSC? as for me it looks like Kannel response.

Thanks
----
Best Regards,





On Mon, 23 Sep 2019 at 11:54, Rene Kluwen <[email protected]> wrote:

> Hi Denis,
>
>
>
> It can mean different things. It’s best to inquire with your smsc
> themselves to ask them what this message means.
>
>
>
> Regards,
>
>
>
> Rene Kluwen
>
>
>
>
>
> *Van:* users <[email protected]> *Namens *Denis Lezgin
> *Verzonden:* maandag 23 september 2019 10:51
> *Aan:* [email protected]
> *Onderwerp:* SMSC - Maximum retries for message exceeded, discarding it!
>
>
>
> Hi guys,
>
>
>
> I noticed strange behavior of bearerbox (SMSC side of it) that most likely
> have been occurring for some long time but I just noticed it.
>
>
>
> In smsc log i see following warning message:
>
>
>
> "Maximum retries for message exceeded, discarding it!"
>
>
>
> and it comes right after submit_sm_resp that has an error from SMSC within
> it, for example:
>
>
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 =
> 0x80000004
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x00000008
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 =
> 0x001c162f
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:    Octet string at 0x7f209a78aba0:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:      len:  2
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:      size: 3
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:      immutable: 0
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:      data: 04
> 23                                             .#
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:    Octet string dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code
> 0x00000008 (System Error) in response to submit_sm PDU.
>
> 2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message
> exceeded, discarding it!
>
>
>
> SMSC conf:
>
>
>
> group = smsc
> smsc = smpp
> smsc-id =
> smsc-admin-id =
> allowed-smsc-id =
> host =
> port =
> transceiver-mode = true
> throughput = 30
> smsc-username =
> smsc-password =
> interface-version = 34
> system-type = "ESME"
> source-addr-ton = 3
> source-addr-npi = 9
> dest-addr-ton = 1
> dest-addr-npi = 1
> reconnect-delay = 10
> enquire-link-interval = 60
> address-range = ""
> log-file = "/opt/kannel/var/log/smsc_.log"
> log-level = 0
> msg-id-type = 0x01
> source-addr-autodetect = yes
>
>
>
> The "0x00000008 (System Error)" is ok, we know what this error means and
> how to process it.
>
>
>
> I searched a lot about this warning message over the internet but couldn't
> find anything.
>
>
>
> Is there anyway to overcome this issue maybe?
>
>
>
>
>
> Our system information:
>
> Kannel bearerbox version `svn-r5180M'
>
> OS: Ubuntu 14.04.4 LTS
>
>
>
>
>
> Thanks in advance!
>
> ----
>
> Best Regards,
>
>
>
>
>
>