Re: IBM Purify problem with LDAP 6.0.2 DBG and OPT libraries

what toolchain are you using? both DBG and OPT there are built with
Sun Studio [ 11 i think ]. you can always check out the source code
and build your own binaries using whatever toolchain you have there.

David B Hinz wrote:
>  
> I've run into an interesting problem when linking with the OPT version 
> of the LDAP 6.0.2 libraries compared to linking with the DBG libraries 
> on Solaris 8 and possible on Solaris 10.
>  
> I downloaded the pre-built libraries from 
> ftp://ftp.mozilla.org/pub/mozilla.org/directory/c-sdk/releases/v6.0.2-contrib-bin/
>  
> Both sets of libraries work.  I run into problems when linking the 
> executables with the OPT version of of the libraries with IBM Purify 
> 7.0.0.8 as 32- or 64-bit.  (Newer iFix releases of Purify 7.0.0.10 and 
> 7.0.0.12 do not fix the problem.)
>  
> When linked as 32-bit with Purify the executables core dump with the 
> following stack:
>  
> 
> (dbx)where
> 
>   [1] StRlEn(0x24, 0x16, 0x24, 0xbd000000, 0x0, 0xfd741ef0), at 0xfd741f40
> 
>   [2] strlen(0x0, 0xfd58f018, 0x1, 0xb8, 0xfffff940, 0x2), at 0x485ec
> 
>   [3] dosprintf(0xffbf7e80, 0xffffffff, 0xffbf7f4c, 0x0, 0x0, 
> 0xfd4f0e68), at 0xfd495a80
> 
>   [4] PR_vsmprintf(0xfd58f010, 0xffb7f40, 0xfd495f28, 0xfd4f0e68, 
> 0xfffa50c0, 0x5ac00), at 0xfd496434
> 
>   [5] PR_smprintf(0xfd58f010, 0xb8f28, 0xfd5a53bc, 0x24, 0x9, 0xc), at 
> 0xfd49636c
> 
>   [6] secmod_mkSlotFlags(0x80003f3f, 0x8bc, 0x1, 0x79274, 0xfd5a17c0, 
> 0xfd5a207c), at 0xfd528678
> 
>   [7] secmod_mkSlotString(0x1, 0x80003f3f, 0x1e, 0xff, 0x0, 0x0), at 
> 0xfd52eaf0
> 
>   [8] secmod_decodeData(0x0, 0x1, 0xb8680, 0xb84b0, 0x1, 0x0), at 0xfd52eaf0
> 
>   [9] secmod_ReadPermDB(0xb4138, 0xb30e0, 0xb3300, 0xb2928, 0x0, 
> 0xb33e0), at 0xfd52f2a4
> 
>   [10] NSC_ModuleDBFunc(0x0, 0xb2928, 0x0, 0xfd6e20d8, 0xb3300, 
> 0xfd5a17c0), at 0xfd536840
> 
>   [11] SECMOD_LoadModule(0xb0c88, 0x0, 0x1, 0xb0430, 0x1114, 0xb28a0), 
> at 0xfd6556e4
> 
>   [12] nss_Init(0xaf898, 0xaf950, 0xafc30, 0xfdaf5ce0, 0xb0130, 0x0), at 
> 0xfd60ec38
> 
>   [13] NSS_Initialize(0xaf898, 0xaf950, 0xafc30, 0x1, 0x1, 0x0), at 
> 0xfd60f0d0
> 
>   [14] ldapssl_basic_init(0x77da8, 0xfffec2b8, 0xfdaf5ce0, 0xfdb09a28, 
> 0xbd00000, 0x16cc4), at 0xfdaf2c30
> 
>   [15] ldapssl_clientauth_init(0x77da8, 0xfdb09ec8, 0x1, 0x77dc0, 0x4a0, 
> 0x0), at 0xfdaf2db4
> 
> =>[16] main(argc = 1, argv = 0xffbf8454), line 35 in “ldap_small.c”
> 
>  
> When linked as 64-bit with Purify the executables run but always fail in 
> the ldapssl_enable_clientauth() function.
>  
> Has anyone else tried using Purify with the LDAP 6.0.2 libraries?
>  
> What are the differences between the DBG and OPT libraries?
>  
> I haven't tried 6.0.4, since pre-built libraries are not available and I 
> have not had much success building NSS, NSPR, LDAP, etc. to get the full 
> suite of libraries available for testing.
>  
> david.
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> dev-tech-ldap mailing list
> [email protected]
> https://lists.mozilla.org/listinfo/dev-tech-ldap