Re: Request for support for new camera, OM Systems OM-1

Hi,

thanks for the report!

I added code to the current libgphoto2 master branch to enable OM-1 for capture.

Judging from the debug it will probably work, but would like to have feedback 
if it does :)

Ciao, Marcus
On Mon, Jul 24, 2023 at 04:17:12PM +0000, bill.visick via Gphoto-devel wrote:
> Hi,
> 
> I’m trying to use an OM System OM-1 camera with libgphoto2 (actually so I can use it tethered from darktable) and it is not supported. I think this is because it’s too new: the earlier Olympus OMD EM1 mark 3 is supported. The results of the commands listed on your support page follow and I attach the debug log from capture image.
> 
> I hope this gives you sufficient information and thanks for looking at this, and for all the great work on this project – it’s much appreciated.
> 
> $ lsusb
> Bus 002 Device 004: ID 33a2:0136 OMSYSTEM OM-1
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> 
> $ gphoto2 --auto-detect
> Model Port
> ----------------------------------------------------------
> USB PTP Class Camera usb:002,004
> bill@jim-laptop:~$ LANG=C gphoto2 --summary >summary.txt
> bill@jim-laptop:~$ LANG=C gphoto2 --list-all-config >config.txt
> 
> $ gphoto2 --capture-image
> 
> *** Error ***
> Sorry, your camera does not support generic capture
> ERROR: Could not capture image.
> ERROR: Could not capture.
> *** Error (-6: 'Unsupported operation') ***
> 
> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <[email protected]>, please run
> gphoto2 as follows:
> 
> env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
> See my-logfile.txt attached
> 
> Regards
> Bill
> +44 7901 954568
> 
> Sent with [Proton Mail](https://proton.me/) secure email.


_______________________________________________
Gphoto-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/gphoto-devel