DMC-FS62 Gphoto2 Camera Files

Rich Biggs <[email protected]> Tue, 5 Jan 2021 05:11:22 -0500

Newsgroups	gmane.comp.multimedia.gphoto.devel
Message-ID	<CAAhyKxCqPBa+zMPOzt4v_jFcgV1F8HdM+q0dojvXBrOfhy-1BA@mail.gmail.com>

Hello,

I recently started utilizing octolapse with gphoto2 along my 3d printing
journey. I have successfully set it up with the Logitech C922x (webcam)
however having some issues with my Panasonic Lumix G85.

I did check the compatibility list against the auto-detect label (DMC-FS62)
and see that it is not currently supported but was hoping providing
information may enable it to be supported in the future. I did make sure to
put the camera into USB PTP mode.

As stated GPhoto2 does auto detect the camera, however it is unable to
manually capture-image.

I ran the 2 commands as suggested at the top of the compatibility page and
have attached the output to this email.

If there is anything I could do to further assist this camera being
supported please let me know.

Thank you for your time and assistance,

Rich Biggs

P.S. Unsure if it is relevant but this is being ran on a Raspberry Pi 4
with Octopi 0.17.0 Operating System

_______________________________________________
Gphoto-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/gphoto-devel

CameraModel.txt (text/plain, 20 B)

Panasonic DMC-FS62

config.txt (text/plain, 1 KB)

/main/actions/opcode
Label: PTP Opcode
Readonly: 0
Type: TEXT
Current: 0x1001,0xparam1,0xparam2
END
/main/status/serialnumber
Label: Serial Number
Readonly: 0
Type: TEXT
Current: 000000000000000000XEL2009090052
END
/main/status/manufacturer
Label: Camera Manufacturer
Readonly: 0
Type: TEXT
Current: Panasonic
END
/main/status/cameramodel
Label: Camera Model
Readonly: 0
Type: TEXT
Current: DMC-G85
END
/main/status/deviceversion
Label: Device Version
Readonly: 0
Type: TEXT
Current: 1.5
END
/main/status/vendorextension
Label: Vendor Extension
Readonly: 0
Type: TEXT
Current: None
END
/main/status/batterylevel
Label: Battery Level
Readonly: 1
Type: TEXT
Current: 50%
END
/main/other/d406
Label: Session Initiator Info
Readonly: 0
Type: TEXT
Current: Windows/6.2.9200 MTPClassDriver/6.2.9200.16384
END
/main/other/d407
Label: Perceived Device Type
Readonly: 1
Type: TEXT
Current: 1
END
/main/other/5001
Label: Battery Level
Readonly: 1
Type: RANGE
Current: 50
Bottom: 0
Top: 100
Step: 10
END

summary.txt (text/plain, 1.9 KB)

Camera summary:
Manufacturer: Panasonic
Model: DMC-G85
  Version: 1.5
  Serial Number: 000000000000000000XEL2009090052
Vendor Extension ID: 0x6 (1.0)

Capture Formats:
Display Formats: Association/Directory, DPOF, Apple Quicktime, Defined Type, JPEG
Supported MTP Object Properties:
        Association/Directory/3001: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc05/AssociationType dc07/ObjectFileName dc0b/Par$
        DPOF/3006: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectI$
        Apple Quicktime/300d: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUn$
        Defined Type/3800: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqu$
        JPEG/3801: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectI$

Device Capabilities:
        File Download, File Deletion, No File Upload
        No Image Capture, No Open Capture, No vendor specific capture

Storage Devices Summary:
store_00010001:
        StorageDescription: None
        VolumeLabel: None
        Storage Type: Removable RAM (memory card)
        Filesystemtype: Digital Camera Layout (DCIM)
        Access Capability: Read-Write
        Maximum Capability: 127831900160 (121910 MB)
        Free Space (Bytes): 127050842112 (121165 MB)
        Free Space (Images): 0

Device Property Summary:
Session Initiator Info(0xd406):(readwrite) (type=0xffff) 'Windows/6.2.9200 MTPClassDriver/6.2.9200.16384'
Perceived Device Type(0xd407):(read only) (type=0x6) 1
Battery Level(0x5001):(read only) (type=0x2) Range [0 - 100, step 10] value: 50% (50)