Re: 回复: 回复: About Olym pus E-PL2

Hi,

This seems like you want to do postprocessing or using Octoprint?

THis is outside of libgphoto2 work, I can not help you here.

Can you see if there are HOWTOs or other forums for OctoPrint or what you are using?

Ciao, Marcus
On Tue, Jan 19, 2021 at 11:52:25PM +0000, Sam Huang wrote:
> Hi Marcus,
> 
> I got a new issue here, since I have the Mosaic Canvas Hub S(Pi), I don’t know if this make everything hard. I can’t continue to setup the process.
> 
> pi@b87r-ch-canvas-hub:~ $ whereis gphoto2
> gphoto2: /usr/bin/gphoto2 /usr/share/man/man1/gphoto2.1.gz
> pi@b87r-ch-canvas-hub:~ $ gphoto2 --auto-detect
> Model                          Port
> ----------------------------------------------------------
> Nikon DSC D90 (PTP mode)       usb:001,006
> pi@b87r-ch-canvas-hub:~ $ gphoto2 --capture-image
> New file is in location /capt0000.jpg on the camera
> pi@b87r-ch-canvas-hub:~ $ gphoto2 --capture-image-and-download
> New file is in location /capt0000.jpg on the camera
> File capt0000.jpg exists. Overwrite? [y|n] y
> Saving file as capt0000.jpg
> Deleting file /capt0000.jpg on the camera
> pi@b87r-ch-canvas-hub:~ $ ls
> capt0000.jpg  led.py  netconnectd  OctoPrint  webcam
> pi@b87r-ch-canvas-hub:~ $ cd /home/pi/scripts
> -bash: cd: /home/pi/scripts: No such file or directory
> pi@b87r-ch-canvas-hub:~ $
> 
> 
> Thanks for help me.
> 
> Sam
> 
> 
> 
> 发件人: Marcus Meissner<mailto:[email protected]>
> 发送时间: 2021年1月19日 14:41
> 收件人: Sam Huang<mailto:[email protected]>
> 抄送: [email protected]<mailto:[email protected]>
> 主题: Re: 回复: [gphoto-devel] About Olympus E-PL2
> 
> Hi,
> 
> You can only download the pictures you took with the camera manually.
> 
> You can not remotely trigger any capture or preview with this camera.
> 
> Ciao, Marcus
> On Tue, Jan 19, 2021 at 06:31:47AM +0000, Sam Huang wrote:
> > Thanks for your reply, Marcus. You mean try to using downloading of pictures to take the actual pictures? Sorry I am new to these, haha.
> >
> >
> > Best Regards,
> >
> > Sam Huang
> >
> > Product Designer | Waboba AB GZ Rep Office
> > Tele: +86-20-8890 2847
> > Room1606, Jinke Plaza, No. 19th GuangWei Road
> > YueXiu District, Guangzhou City, China  510030
> > Waboba.com<https://waboba.com/>
> > [cid:[email protected]]
> >
> > 发件人: Marcus Meissner<mailto:[email protected]>
> > 发送时间: 2021年1月19日 14:27
> > 收件人: Sam Huang<mailto:[email protected]>
> > 抄送: [email protected]<mailto:[email protected]>
> > 主题: Re: [gphoto-devel] About Olympus E-PL2
> >
> > On Mon, Jan 18, 2021 at 10:14:04PM +0000, Sam Huang wrote:
> > > Hi,
> > > I have an old camera Olympus E-PL2, I tried to use it for Gphoto on Octoprint, but it didn’t work, do you know how to make it work? It does show “MTP” when I plug in the USB into my pi.
> > > It does detect the camera, but it shows the wrong model:
> > > Olympus mju 500                usb:001,004
> >
> > The mju series does not support remote control, but only download of pictures.
> >
> > If downloading of pictures work, then we are ok.
> >
> > CIoa, Marcus
> >
> 
> 


_______________________________________________
Gphoto-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/gphoto-devel