Re: *** Error *** , Packet was rejected by camera. Please contact <[email protected]>.
Dieter Blaas <[email protected]>
| Newsgroups | gmane.comp.multimedia.gphoto.devel |
|---|---|
| Message-ID | <[email protected]> |
Hi Marcus and Sam, thanks a lot for your comments! I finally believe that this, and all my other identical cams have suffered the same damages over the years. All of a sudden they behaved strange when operated with the old Windows program cam2com and became irreliable. Nevertheless, there is a single one that I have been using since many years without any problem. All the others started losing connection or were not even being recognized after one or two years. Below are several gphoto2 commands and their outputs (sorry, I used a German system here). If you have any idea, please let me know! However, I think that I have to find another way or simply buy more expensive and more recent cams and it is not worthwhile to dig into this further! Best, Dieter blaas@ubuntu:~$ gphoto2 --auto-detect Modell Port ---------------------------------------------------------- Olympus C-2040Z usbscsi:/dev/sg2 Olympus C-2040Z usbscsi:/dev/sg3 ########################################################### blaas@ubuntu:~$ gphoto2 --capture-image-and-download FEHLER: Konnte Bild nicht aufnehmen. FEHLER: Konnte nicht aufnehmen. blaas@ubuntu:~$ gphoto2 --summary *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). Kamerazusammenfassung: Project-Id-Version: libexif 0.6.16 Report-Msgid-Bugs-To: [email protected] PO-Revision-Date: 2013-10-06 17:52+0200 Last-Translator: Marcus Meissner Language-Team: German <[email protected]> Language: de MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Generator: Lokalize 1.4 Plural-Forms: nplurals=2; plural=n == 1 ? 0 : 1; ########################################################### blaas@ubuntu:~$ gphoto2 --summary *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. blaas@ubuntu:~$ gphoto2 --summary *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). Kamerazusammenfassung: Project-Id-Version: libexif 0.6.16 Report-Msgid-Bugs-To: [email protected] PO-Revision-Date: 2013-10-06 17:52+0200 Last-Translator: Marcus Meissner Language-Team: German <[email protected]> Language: de MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Generator: Lokalize 1.4 Plural-Forms: nplurals=2; plural=n == 1 ? 0 : 1; Bitte kontaktieren Sie <[email protected]> (auf Englisch). *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). Kamerazusammenfassung: Project-Id-Version: libexif 0.6.16 Report-Msgid-Bugs-To: [email protected] PO-Revision-Date: 2013-10-06 17:52+0200 Last-Translator: Marcus Meissner Language-Team: German <[email protected]> Language: de MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Generator: Lokalize 1.4 Plural-Forms: nplurals=2; plural=n == 1 ? 0 : 1; ############################################################### blaas@ubuntu:~$ gphoto2 --storage-info [Storage 0] basedir=/ access=0 Lesen/Schreiben type=4 Entfernbarer RAM fstype=4 Kamera Struktur (DCIM) ################################################################ blaas@ubuntu:~$ gphoto2 --list-all-config *** Fehler *** Rekursive Aufrufe werden vom Sierra-Treiber nicht unterstützt. Bitte kontaktieren Sie <[email protected]> (auf Englisch). ################################################################## laas@ubuntu:~$ gphoto2 --storage-info [Storage 0] basedir=/ access=0 Lesen/Schreiben type=4 Entfernbarer RAM fstype=4 Kamera Struktur (DCIM) #################################################################### blaas@ubuntu:~$ gphoto2 --trigger-capture *** Fehler *** This camera cannot trigger capture. FEHLER: Konnte nicht aufnehmen. *** Fehler (-6: »Nicht unterstützte Funktion«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --trigger-capture Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. ###################################################################### blaas@ubuntu:~$ gphoto2 --no-keep blaas@ubuntu:~$ gphoto2 --trigger-capture *** Fehler *** This camera cannot trigger capture. FEHLER: Konnte nicht aufnehmen. *** Fehler (-6: »Nicht unterstützte Funktion«) *** blaas@ubuntu:~$ gphoto2 --keep-raw blaas@ubuntu:~$ gphoto2 --trigger-capture *** Fehler *** This camera cannot trigger capture. FEHLER: Konnte nicht aufnehmen. *** Fehler (-6: »Nicht unterstützte Funktion«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --trigger-capture Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --trigger-capture Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. blaas@ubuntu:~$ gphoto2 --keep-raw blaas@ubuntu:~$ gphoto2 --trigger-capture *** Fehler *** This camera cannot trigger capture. FEHLER: Konnte nicht aufnehmen. *** Fehler (-6: »Nicht unterstützte Funktion«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --trigger-capture Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. ############################################################################# blaas@ubuntu:~$ gphoto2 --keep-raw blaas@ubuntu:~$ gphoto2 --trigger-capture *** Fehler *** This camera cannot trigger capture. FEHLER: Konnte nicht aufnehmen. *** Fehler (-6: »Nicht unterstützte Funktion«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifizierter Fehler«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. blaas@ubuntu:~$ gphoto2 --keep-raw blaas@ubuntu:~$ gphoto2 --trigger-capture *** Fehler *** This camera cannot trigger capture. FEHLER: Konnte nicht aufnehmen. *** Fehler (-6: »Nicht unterstützte Funktion«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --trigger-capture Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --trigger-capture Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. ###################################################################### blaas@ubuntu:~$ gphoto2 --abilities Fähigkeiten für Kamera : Olympus C-2040Z Unterstützung für seriellen Port : Ja USB-Unterstützung : Nein Unterstützte Datenraten (seriell): : 9600 : 19200 : 38400 : 57600 blaas@ubuntu:~$ gphoto2 --abilities Fähigkeiten für Kamera : Mass Storage Camera Unterstützung für seriellen Port : Nein USB-Unterstützung : Nein Aufnahme machen (Auswahl) : : Aufnahme wird nicht durch Treiber unterstützt Konfigurationsunterstützung : Nein Unterstützung für das Löschen einzelner Bilder: Ja Unterstützung für das Löschen aller Bilder : Nein Unterstützung für Bildvorschau : Nein Unterstützung für Bildhochladen : Ja : 115200 blaas@ubuntu:~$ gphoto2 --abilities Fähigkeiten für Kamera : Mass Storage Camera Unterstützung für seriellen Port : Nein USB-Unterstützung : Nein Aufnahme machen (Auswahl) : : Aufnahme wird nicht durch Treiber unterstützt Konfigurationsunterstützung : Nein Unterstützung für das Löschen einzelner Bilder: Ja Unterstützung für das Löschen aller Bilder : Nein Unterstützung für Bildvorschau : Nein Unterstützung für Bildhochladen : Ja Aufnahme machen (Auswahl) : : Bild : Bildvorschau Konfigurationsunterstützung : Ja Unterstützung für das Löschen einzelner Bilder: Ja Unterstützung für das Löschen aller Bilder : Ja Unterstützung für Bildvorschau : Ja Unterstützung für Bildhochladen : Ja #################################################################### blaas@ubuntu:~$ gphoto2 --show-preview *** Fehler (-1: »Unspezifiblaas@ubuntu:~$ gphoto2 --abilities Fähigkeiten für Kamera : Mass Storage Camera Unterstützung für seriellen Port : Nein USB-Unterstützung : Nein Aufnahme machen (Auswahl) : : Aufnahme wird nicht durch Treiber unterstützt Konfigurationsunterstützung : Nein Unterstützung für das Löschen einzelner Bilder: Ja Unterstützung für das Löschen aller Bilder : Nein Unterstützung für Bildvorschau : Nein Unterstützung für Bildhochladen : Ja zierter Fehler«) *** Für Debug-Meldungen verwenden Sie bitte die Option »--debug«. Diese Meldungen können Ihnen helfen, eine Lösung für Ihr Problem zu finden. Wenn Sie jedoch Fehler- oder Debug-Meldungen an die Mailingliste <[email protected]> schicken wollen, so starten sie gphoto2 bitte wie folgt: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --show-preview Bitte stellen Sie sicher das die uebergebenen Argument ausreichend gequoted sind. ####################################################################### ------------------------------------------------------------------------ Dieter Blaas, Max Perutz Laboratories Medical University of Vienna, Inst. Med. Biochem., Vienna Biocenter (VBC), Dr. Bohr Gasse 9/3, A-1030 Vienna, Austria, Tel: 0043 1 4277 61630, Mobile: 0043 699 1942 1659 e-mail: [email protected] ------------------------------------------------------------------------ On 22.07.2021 18:02, Sam Friedman wrote: > Yeah it’s strange to me that after a certain point they would just stop working! I wonder why. > > I know for me in the past I run into trouble when I try to shoot to the internal RAM instead of the memory card. With the Canon cameras I’ve worked with, gphoto defaults to shooting to RAM instead of memory card. Worth double checking! > > -- > http://www.samfriedman.tech > >> On Jul 22, 2021, at 11:19, Dieter Blaas <[email protected]> wrote: >> >> Hi Sam, >> >> thanks a lot for the hint! I'll try as soon as I have access to cam and PC and report back! The strange issue with the memory card occurred also with other cameras. It usually manifest in the message: something like 'no space left'. When trying to format it I find that the option 'format' is greyed out and thus it is not possible to format it. I have tried a number of cards, of course all old because the cam is quite old as well, but they behaved the same! So my guess is that something in the cam is broken. I have various old cams that suffered the same problem after using them for a year or two. There is only one that has been working for several years without any problem..... >> >> bw Dieter >> >> >> ------------------------------------------------------------------------ >> Dieter Blaas, >> Max Perutz Laboratories >> Medical University of Vienna, >> Inst. Med. Biochem., Vienna Biocenter (VBC), >> Dr. Bohr Gasse 9/3, >> Tel: 0043 1 4277 61630, >> Mobile: 0043 699 1942 1659 >> e-mail: [email protected] >> ------------------------------------------------------------------------ >> >>> On 22.07.2021 14:46, Sam Friedman wrote: >>> Hi Dieter, >>> >>> Maybe this is a stupid question, I apologize, but I noticed you didn’t mention using the command “gphoto2 —trigger-capture” >>> >>> Is that because of the issue with the memory card? Have you tried other memory cards? >>> >>> I realize this is very basic troubleshooting I’m offering, but it’s the first thing that came to mind… I’ve noticed with cameras I’ve used in the past, the options you used don’t always work for me, but when I make sure to set the storage target to memory card and then perform “trigger-capture,” that works, and then I just have to do the extra step of manually collecting the image from the memory card. >>> >>> Apologies if you’ve already done these things! >>> >>> Sam >>> >>> >>> >>> -- >>> http://www.samfriedman.tech >>> >>>>> On Jul 22, 2021, at 04:28, Dieter Blaas <[email protected]> wrote: >>>> Dear Marcus, >>>> >>>> thanks for your willingness to help! I am afraid that the camera is broken: With the old Windows software Cam2Com it works sometimes and sometimes not. I had such failures before and finally needed changing the camera. I was hoping that the problem could eventually be overcome with gphoto2...... >>>> >>>> I believe that there are no cameras of this particular type remaining on the planet: I bought them all :-( >>>> >>>> Best, Dieter >>>> >>>> ------------------------------------------------------------------------ >>>> Dieter Blaas, >>>> Max Perutz Laboratories >>>> Medical University of Vienna, >>>> Inst. Med. Biochem., Vienna Biocenter (VBC), >>>> Dr. Bohr Gasse 9/3, >>>> A-1030 Vienna, Austria, >>>> Tel: 0043 1 4277 61630, >>>> Mobile: 0043 699 1942 1659 >>>> e-mail: [email protected] >>>> ------------------------------------------------------------------------ >>>> >>>>> On 21.07.2021 17:54, Marcus Meissner wrote: >>>>> Hi, >>>>> >>>>> It tries to do cause a sierra capture action, but receives status code 0x11 SIERRA_PACKET_INVALID >>>>> back. >>>>> >>>>> before it queries register 0x33 (card present) and receives 0x3 ... no idea what that means. >>>>> >>>>> I currently have still no good idea. Need to try with my Nikon Coolpix 2500 >>>>> to see if I can see something. >>>>> >>>>> But I have not much hope. >>>>> >>>>> Ciao, Marcus >>>>> >>>>>> On Mon, Jul 12, 2021 at 03:30:19PM +0200, Dieter Blaas wrote: >>>>>> Dear Marcus, >>>>>> >>>>>> referring to my last mail I finally came back from vacations and run the >>>>>> command: "env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt >>>>>> --capture-image" >>>>>> >>>>>> The output is attached. Please note that it is an Olympus C-40Zoom and not, >>>>>> as reported by gphoto2, an Olympus C2040-Z. As I wrote already, changing the >>>>>> memory card for several other ones did not help and a new one is not >>>>>> available since long! It would be great if you found a way of getting it to >>>>>> run! >>>>>> >>>>>> Thanks a lot, best regards, Dieter >>>>>> >>>>>> ------------------------------------------------------------------------ >>>>>> Dieter Blaas, >>>>>> Max Perutz Laboratories >>>>>> Medical University of Vienna, >>>>>> Inst. Med. Biochem., Vienna Biocenter (VBC), >>>>>> Dr. Bohr Gasse 9/3, >>>>>> A-1030 Vienna, Austria, >>>>>> Tel: 0043 1 4277 61630, >>>>>> Mobile: 0043 699 1942 1659 >>>>>> e-mail: [email protected] >>>>>> ------------------------------------------------------------------------ >>>>>> >>>>>> On 22.06.2021 21:40, Dieter Blaas wrote: >>>>>>> Hi Marcus, >>>>>>> >>>>>>> thank you so much for the quick answer! I am afraid that this does not >>>>>>> help: I already tried replacing the card by another one (they are very >>>>>>> old and not available since long) but without avail. I am afraid that >>>>>>> something happened to the camera. I shall be on vacations for about 2 >>>>>>> weeks but shall come back to you with a debuglogfile. I find it quite >>>>>>> strange that all seems to work except from capturing a photo! >>>>>>> >>>>>>> Best. Dieter >>>>>>> >>>>>>> ------------------------------------------------------------------------ >>>>>>> Dieter Blaas, >>>>>>> Max Perutz Labora fdatories >>>>>>> Medical University of Vienna, >>>>>>> Inst. Med. Biochem., Vienna Biocenter (VBC), >>>>>>> Dr. Bohr Gasse 9/3, >>>>>>> A-1030 Vienna, Austria, >>>>>>> Tel: 0043 1 4277 61630, >>>>>>> Mobile: 0043 699 1942 1659 >>>>>>> e-mail: [email protected] >>>>>>> ------------------------------------------------------------------------ >>>>>>> >>>>>>> On 22.06.2021 17:20, Marcus Meissner wrote: >>>>>>>> On Tue, Jun 22, 2021 at 01:36:29AM +0200, Dieter Blaas wrote: >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> I installed gphoto2 from the repository under Ubuntu-Mate >>>>>>>>> 20.04 and >>>>>>>>> tried controlling an old Olympus C-40Z connected to a power >>>>>>>>> supply. I got >>>>>>>>> the following: >>>>>>>>> >>>>>>>>> 1) gphoto2 --list-config >>>>>>>>> /Camera Configuration/Picture Settings/resolution >>>>>>>>> /Camera Configuration/Picture Settings/shutter >>>>>>>>> /Camera Configuration/Picture Settings/aperture >>>>>>>>> /Camera Configuration/Picture Settings/color >>>>>>>>> /Camera Configuration/Picture Settings/flash >>>>>>>>> /Camera Configuration/Picture Settings/whitebalance >>>>>>>>> /Camera Configuration/Picture Settings/focus-mode >>>>>>>>> /Camera Configuration/Picture Settings/focus-pos >>>>>>>>> /Camera Configuration/Picture Settings/exp >>>>>>>>> /Camera Configuration/Picture Settings/exp-meter >>>>>>>>> /Camera Configuration/Picture Settings/zoom >>>>>>>>> /Camera Configuration/Picture Settings/dzoom >>>>>>>>> /Camera Configuration/Picture Settings/iso >>>>>>>>> /Camera Configuration/Camera Settings/date-time >>>>>>>>> /Camera Configuration/Camera Settings/lcd-mode >>>>>>>>> /Camera Configuration/Camera Settings/lcd-brightness >>>>>>>>> /Camera Configuration/Camera Settings/lcd-auto-shutoff >>>>>>>>> /Camera Configuration/Camera Settings/camera-power-save >>>>>>>>> /Camera Configuration/Camera Settings/host-power-save >>>>>>>>> /Camera Configuration/Camera Settings/timefmt >>>>>>>>> >>>>>>>>> 2) gphoto2 --summary >>>>>>>>> Camera summary: >>>>>>>>> Camera Model: SX553 >>>>>>>>> Manufacturer: OLYMPUS OPTICAL CO.,LTD. >>>>>>>>> Camera ID: SAUNA >>>>>>>>> Serial Number: 000203123086 >>>>>>>>> Software Rev.: v553p-73 >>>>>>>>> Frames Taken: 0 >>>>>>>>> Frames Left: 0 >>>>>>>>> Battery Life: 0 >>>>>>>>> Memory Left: 0 bytes >>>>>>>>> Date: Thu Jan 1 00:59:59 1970 >>>>>>>>> >>>>>>>>> 3) gphoto2 --capture-preview ------- WORKS >>>>>>>>> >>>>>>>>> 4) gphoto2 --capture-movie--------- WORKS >>>>>>>>> >>>>>>>>> 5) However, when evoking gphoto2 --capture-image-and-download or just >>>>>>>>> gphoto2 --capture-image >>>>>>>>> >>>>>>>>> I get: >>>>>>>>> >>>>>>>>> >>>>>>>>> *** Error *** >>>>>>>>> Packet was rejected by camera. Please contact >>>>>>>>> <[email protected]>. >>>>>>>>> ERROR: Could not capture image. >>>>>>>>> ERROR: Could not capture. >>>>>>>>> >>>>>>>>> What is wrong? So far I used Sabsik's Cam2Com running under >>>>>>>>> Windows XP to >>>>>>>>> control three identical cameras but wanted to finally migrate to Linux. >>>>>>>>> There is a problem with the memory card as the camera says that >>>>>>>>> it is full >>>>>>>>> and it refuses to format it. With Cam2Com I, therefore, used >>>>>>>>> direct download >>>>>>>>> without storing the image on the memory card. Is there a way of >>>>>>>>> doing so >>>>>>>>> under gphoto2 as well? Maybe the error is related to the >>>>>>>>> defective internal >>>>>>>>> storage. I must say that I have used a number of the same type >>>>>>>>> of camera >>>>>>>>> over the years as all finally ended with one or another defect >>>>>>>>> that made >>>>>>>>> them useless. But this one still worked! >>>>>>>> Currently our capture goes via card... >>>>>>>> >>>>>>>> Can you not try to buy another card as quick workaround? >>>>>>>> >>>>>>>> Also a debuglogfile might be useful, but it seems card related. >>>>>>>> >>>>>>>> ciao, Marcus >>>>>> 0.000020 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >>>>>> 0.000134 main (2): gphoto2 2.5.23 >>>>>> 0.000160 main (2): gphoto2 has been compiled with the following options: >>>>>> 0.000183 main (2): + gcc (C compiler used) >>>>>> 0.000204 main (2): + popt (mandatory, for handling command-line parameters) >>>>>> 0.000225 main (2): + exif (for displaying EXIF information) >>>>>> 0.000245 main (2): + cdk (for accessing configuration options) >>>>>> 0.000265 main (2): + aa (for displaying live previews) >>>>>> 0.000285 main (2): + jpeg (for displaying live previews in JPEG format) >>>>>> 0.000307 main (2): + readline (for easy navigation in the shell) >>>>>> 0.000337 main (2): libgphoto2 2.5.25 >>>>>> 0.000362 main (2): libgphoto2 has been compiled with the following options: >>>>>> 0.000387 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >>>>>> 0.000408 main (2): + gcc (C compiler used) >>>>>> 0.000430 main (2): + ltdl (for portable loading of camlibs) >>>>>> 0.000450 main (2): + EXIF (for special handling of EXIF files) >>>>>> 0.000479 main (2): libgphoto2_port 0.12.0 >>>>>> 0.000502 main (2): libgphoto2_port has been compiled with the following options: >>>>>> 0.000523 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >>>>>> 0.000544 main (2): + gcc (C compiler used) >>>>>> 0.000564 main (2): + ltdl (for portable loading of iolibs) >>>>>> 0.000584 main (2): + EXIF (for vusb) >>>>>> 0.000604 main (2): + USB (libusb1, for USB cameras) >>>>>> 0.000624 main (2): + serial (for serial cameras) >>>>>> 0.000644 main (2): + no resmgr (serial port access and locking) >>>>>> 0.000664 main (2): + no ttylock (serial port locking) >>>>>> 0.000684 main (2): + no lockdev (serial port locking) >>>>>> 0.000704 main (2): CAMLIBS env var not set, using compile-time default instead >>>>>> 0.000725 main (2): IOLIBS env var not set, using compile-time default instead >>>>>> 0.000744 main (2): invoked with following arguments: >>>>>> 0.000765 main (2): --debug >>>>>> 0.000786 main (2): --debug-logfile=my-logfile.txt >>>>>> 0.000806 main (2): --capture-tethered >>>>>> 0.000863 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >>>>>> 0.001001 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >>>>>> 0.001179 main (2): The user has not specified both a model and a port. Try to figure them out. >>>>>> 0.001208 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >>>>>> 0.001388 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.001820 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >>>>>> 0.001868 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >>>>>> 0.001915 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >>>>>> 0.002106 gp_port_library_list (2): found mtab fsname sysfs >>>>>> 0.002136 gp_port_library_list (2): found mtab fsname proc >>>>>> 0.002163 gp_port_library_list (2): found mtab fsname udev >>>>>> 0.002216 gp_port_library_list (2): found mtab fsname devpts >>>>>> 0.002244 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.002292 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >>>>>> 0.003458 gp_port_library_list (2): found mtab fsname /dev/loop0 >>>>>> 0.003647 gp_port_library_list (2): found mtab fsname securityfs >>>>>> 0.003733 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.003875 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.004016 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.004180 gp_port_library_list (2): found mtab fsname cgroup2 >>>>>> 0.004218 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004245 gp_port_library_list (2): found mtab fsname pstore >>>>>> 0.004371 gp_port_library_list (2): found mtab fsname efivarfs >>>>>> 0.004424 gp_port_library_list (2): found mtab fsname none >>>>>> 0.004473 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004501 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004527 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004554 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004581 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004607 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004634 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004660 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004688 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004716 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004742 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004829 gp_port_library_list (2): found mtab fsname systemd-1 >>>>>> 0.004856 gp_port_library_list (2): found mtab fsname hugetlbfs >>>>>> 0.004910 gp_port_library_list (2): found mtab fsname mqueue >>>>>> 0.004937 gp_port_library_list (2): found mtab fsname debugfs >>>>>> 0.004986 gp_port_library_list (2): found mtab fsname tracefs >>>>>> 0.005035 gp_port_library_list (2): found mtab fsname fusectl >>>>>> 0.005062 gp_port_library_list (2): found mtab fsname configfs >>>>>> 0.005117 gp_port_library_list (2): found mtab fsname /dev/loop1 >>>>>> 0.005163 gp_port_library_list (2): found mtab fsname /dev/loop2 >>>>>> 0.005207 gp_port_library_list (2): found mtab fsname /dev/loop3 >>>>>> 0.005252 gp_port_library_list (2): found mtab fsname /dev/loop4 >>>>>> 0.005295 gp_port_library_list (2): found mtab fsname /dev/loop5 >>>>>> 0.005339 gp_port_library_list (2): found mtab fsname /dev/loop6 >>>>>> 0.005384 gp_port_library_list (2): found mtab fsname /dev/loop8 >>>>>> 0.005427 gp_port_library_list (2): found mtab fsname /dev/loop7 >>>>>> 0.005531 gp_port_library_list (2): found mtab fsname /dev/loop10 >>>>>> 0.005577 gp_port_library_list (2): found mtab fsname /dev/loop9 >>>>>> 0.005623 gp_port_library_list (2): found mtab fsname /dev/loop11 >>>>>> 0.005667 gp_port_library_list (2): found mtab fsname /dev/loop12 >>>>>> 0.005710 gp_port_library_list (2): found mtab fsname /dev/loop13 >>>>>> 0.005754 gp_port_library_list (2): found mtab fsname /dev/loop14 >>>>>> 0.005797 gp_port_library_list (2): found mtab fsname /dev/loop15 >>>>>> 0.005841 gp_port_library_list (2): found mtab fsname /dev/loop16 >>>>>> 0.005884 gp_port_library_list (2): found mtab fsname /dev/loop17 >>>>>> 0.005927 gp_port_library_list (2): found mtab fsname /dev/loop18 >>>>>> 0.005971 gp_port_library_list (2): found mtab fsname /dev/loop19 >>>>>> 0.006014 gp_port_library_list (2): found mtab fsname /dev/loop20 >>>>>> 0.006059 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >>>>>> 0.006102 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.006159 gp_port_library_list (2): found mtab fsname gvfsd-fuse >>>>>> 0.006280 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.006306 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006664 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006693 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006717 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006766 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006789 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007586 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007623 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007646 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007669 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007693 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007715 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007738 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007760 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007783 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007806 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007828 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007851 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007873 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007896 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007918 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007941 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007963 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007986 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008009 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008031 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008053 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008076 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008099 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008122 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008145 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008188 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008211 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008235 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008258 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008281 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008304 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008327 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008351 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008374 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.008396 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.022933 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.023004 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.023040 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,012') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.023072 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >>>>>> 0.023688 foreach_func (2): Loaded 'USB Mass Storage direct IO' ('usbdiskdirect:/dev/sda') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >>>>>> 0.023720 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >>>>>> 0.024203 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >>>>>> 0.024235 gp_port_info_list_count (2): Counting entries (44 available)... >>>>>> 0.024256 gp_port_info_list_count (2): 39 regular entries available. >>>>>> 0.024307 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >>>>>> 0.024449 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >>>>>> 0.024472 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >>>>>> 0.024491 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >>>>>> 0.024510 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >>>>>> 0.024529 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >>>>>> 0.024548 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >>>>>> 0.024566 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >>>>>> 0.024585 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >>>>>> 0.024604 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >>>>>> 0.024622 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >>>>>> 0.024640 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >>>>>> 0.024659 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >>>>>> 0.024677 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >>>>>> 0.024719 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >>>>>> 0.024740 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >>>>>> 0.024760 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >>>>>> 0.024779 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >>>>>> 0.024798 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >>>>>> 0.024821 gp_abilities_list_load_dir (2): Found 18 camera drivers. >>>>>> 0.072571 gp_port_info_list_count (2): Counting entries (44 available)... >>>>>> 0.072659 gp_port_info_list_count (2): 39 regular entries available. >>>>>> 0.072680 gp_port_new (2): Creating new device... >>>>>> 0.072706 gp_port_info_list_get_info (2): Getting info of entry 0 (44 available)... >>>>>> 0.073094 gp_port_set_settings (2): Setting settings... >>>>>> 0.073121 gp_port_info_list_get_info (2): Getting info of entry 1 (44 available)... >>>>>> 0.073365 gp_port_set_settings (2): Setting settings... >>>>>> 0.073389 gp_port_info_list_get_info (2): Getting info of entry 2 (44 available)... >>>>>> 0.073663 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.073685 gp_port_set_settings (2): Setting settings... >>>>>> 0.073706 gp_port_info_list_get_info (2): Getting info of entry 3 (44 available)... >>>>>> 0.073957 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.073979 gp_port_set_settings (2): Setting settings... >>>>>> 0.073999 gp_port_info_list_get_info (2): Getting info of entry 4 (44 available)... >>>>>> 0.074248 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.074269 gp_port_set_settings (2): Setting settings... >>>>>> 0.074290 gp_port_info_list_get_info (2): Getting info of entry 5 (44 available)... >>>>>> 0.074536 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.074558 gp_port_set_settings (2): Setting settings... >>>>>> 0.074578 gp_port_info_list_get_info (2): Getting info of entry 6 (44 available)... >>>>>> 0.075281 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.075310 gp_port_set_settings (2): Setting settings... >>>>>> 0.075331 gp_port_info_list_get_info (2): Getting info of entry 7 (44 available)... >>>>>> 0.075607 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.075629 gp_port_set_settings (2): Setting settings... >>>>>> 0.075650 gp_port_info_list_get_info (2): Getting info of entry 8 (44 available)... >>>>>> 0.075898 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.075920 gp_port_set_settings (2): Setting settings... >>>>>> 0.075940 gp_port_info_list_get_info (2): Getting info of entry 9 (44 available)... >>>>>> 0.076188 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076210 gp_port_set_settings (2): Setting settings... >>>>>> 0.076230 gp_port_info_list_get_info (2): Getting info of entry 10 (44 available)... >>>>>> 0.076476 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076499 gp_port_set_settings (2): Setting settings... >>>>>> 0.076519 gp_port_info_list_get_info (2): Getting info of entry 11 (44 available)... >>>>>> 0.076768 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076790 gp_port_set_settings (2): Setting settings... >>>>>> 0.076810 gp_port_info_list_get_info (2): Getting info of entry 12 (44 available)... >>>>>> 0.077059 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077080 gp_port_set_settings (2): Setting settings... >>>>>> 0.077102 gp_port_info_list_get_info (2): Getting info of entry 13 (44 available)... >>>>>> 0.077350 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077372 gp_port_set_settings (2): Setting settings... >>>>>> 0.077392 gp_port_info_list_get_info (2): Getting info of entry 14 (44 available)... >>>>>> 0.077642 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077663 gp_port_set_settings (2): Setting settings... >>>>>> 0.077709 gp_port_info_list_get_info (2): Getting info of entry 15 (44 available)... >>>>>> 0.077964 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077986 gp_port_set_settings (2): Setting settings... >>>>>> 0.078006 gp_port_info_list_get_info (2): Getting info of entry 16 (44 available)... >>>>>> 0.078253 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078274 gp_port_set_settings (2): Setting settings... >>>>>> 0.078294 gp_port_info_list_get_info (2): Getting info of entry 17 (44 available)... >>>>>> 0.078547 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078570 gp_port_set_settings (2): Setting settings... >>>>>> 0.078591 gp_port_info_list_get_info (2): Getting info of entry 18 (44 available)... >>>>>> 0.078871 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078898 gp_port_set_settings (2): Setting settings... >>>>>> 0.078919 gp_port_info_list_get_info (2): Getting info of entry 19 (44 available)... >>>>>> 0.079176 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079198 gp_port_set_settings (2): Setting settings... >>>>>> 0.079218 gp_port_info_list_get_info (2): Getting info of entry 20 (44 available)... >>>>>> 0.079464 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079486 gp_port_set_settings (2): Setting settings... >>>>>> 0.079506 gp_port_info_list_get_info (2): Getting info of entry 21 (44 available)... >>>>>> 0.079750 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079772 gp_port_set_settings (2): Setting settings... >>>>>> 0.079792 gp_port_info_list_get_info (2): Getting info of entry 22 (44 available)... >>>>>> 0.080036 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080057 gp_port_set_settings (2): Setting settings... >>>>>> 0.080077 gp_port_info_list_get_info (2): Getting info of entry 23 (44 available)... >>>>>> 0.080322 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080343 gp_port_set_settings (2): Setting settings... >>>>>> 0.080364 gp_port_info_list_get_info (2): Getting info of entry 24 (44 available)... >>>>>> 0.080610 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080631 gp_port_set_settings (2): Setting settings... >>>>>> 0.080652 gp_port_info_list_get_info (2): Getting info of entry 25 (44 available)... >>>>>> 0.080897 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080918 gp_port_set_settings (2): Setting settings... >>>>>> 0.080938 gp_port_info_list_get_info (2): Getting info of entry 26 (44 available)... >>>>>> 0.081186 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081207 gp_port_set_settings (2): Setting settings... >>>>>> 0.081227 gp_port_info_list_get_info (2): Getting info of entry 27 (44 available)... >>>>>> 0.081473 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081494 gp_port_set_settings (2): Setting settings... >>>>>> 0.081515 gp_port_info_list_get_info (2): Getting info of entry 28 (44 available)... >>>>>> 0.081761 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081783 gp_port_set_settings (2): Setting settings... >>>>>> 0.081803 gp_port_info_list_get_info (2): Getting info of entry 29 (44 available)... >>>>>> 0.082048 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082069 gp_port_set_settings (2): Setting settings... >>>>>> 0.082089 gp_port_info_list_get_info (2): Getting info of entry 30 (44 available)... >>>>>> 0.082334 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082355 gp_port_set_settings (2): Setting settings... >>>>>> 0.082375 gp_port_info_list_get_info (2): Getting info of entry 31 (44 available)... >>>>>> 0.082620 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082642 gp_port_set_settings (2): Setting settings... >>>>>> 0.082662 gp_port_info_list_get_info (2): Getting info of entry 32 (44 available)... >>>>>> 0.082922 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082966 gp_port_set_settings (2): Setting settings... >>>>>> 0.082987 gp_port_info_list_get_info (2): Getting info of entry 33 (44 available)... >>>>>> 0.083244 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083266 gp_port_set_settings (2): Setting settings... >>>>>> 0.083286 gp_port_info_list_get_info (2): Getting info of entry 34 (44 available)... >>>>>> 0.083534 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083555 gp_port_set_settings (2): Setting settings... >>>>>> 0.083575 gp_port_info_list_get_info (2): Getting info of entry 35 (44 available)... >>>>>> 0.096672 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.096724 gp_port_set_settings (2): Setting settings... >>>>>> 0.096764 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >>>>>> 0.096784 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.096804 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.097904 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.098746 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.098915 gp_port_info_list_get_info (2): Getting info of entry 36 (44 available)... >>>>>> 0.112959 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.113033 gp_port_set_settings (2): Setting settings... >>>>>> 0.113079 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,012, (new int=0, conf=-1, alt=-1) port usb:001,012 >>>>>> 0.113102 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.113125 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.114387 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.115358 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.115481 gp_port_info_list_get_info (2): Getting info of entry 37 (44 available)... >>>>>> 0.116528 gp_port_set_settings (2): Setting settings... >>>>>> 0.116569 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.116872 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >>>>>> 0.117252 gp_port_set_settings (2): Setting settings... >>>>>> 0.117281 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.118618 gp_abilities_list_detect_usb(2): Found 'Olympus C-2040Z' (0x7b4,0x105) >>>>>> 0.118644 gp_port_free (2): Freeing port... >>>>>> 0.118664 gp_port_close (2): Closing port... >>>>>> 0.119051 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >>>>>> 0.119085 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >>>>>> 0.119109 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >>>>>> 0.119393 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (44 entries available)... >>>>>> 0.119420 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >>>>>> 0.119442 gp_camera_set_port_info (2): Setting port info for port 'USB Mass Storage raw SCSI' at 'usbscsi:/dev/sg0'... >>>>>> 0.119818 gp_port_set_settings (2): Setting settings... >>>>>> 0.119853 gp_setting_set (2): Setting key 'port' to value 'usbscsi:/dev/sg0' (gphoto2) >>>>>> 0.119876 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >>>>>> 0.120187 gp_camera_init (2): Initializing camera... >>>>>> 0.120214 gp_camera_init (2): Loading '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'... >>>>>> 0.120690 gp_port_open (2): Opening port... >>>>>> 0.120798 gp_port_usbscsi_lock (2): Trying to lock '/dev/sg0'... >>>>>> 0.120850 gp_port_set_settings (2): Setting settings... >>>>>> 0.120874 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >>>>>> 0.120897 sierra/sierra/library.c (2): Sending initialization sequence to the camera >>>>>> 0.120961 sierra/sierra/sierra.c (2): Establishing connection >>>>>> 0.120984 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.121006 sierra/sierra/library.c (2): sierra_get_int_register: register 0x01... >>>>>> 0.121027 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.121047 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.121073 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.121108 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.121130 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.122060 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.122095 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.122134 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >>>>>> 0.122172 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >>>>>> >>>>>> 0.122220 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >>>>>> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 02 00 01 01 02 00- .C...... >>>>>> >>>>>> 0.122254 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.124355 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.124444 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.124488 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.124524 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.126617 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.126665 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.126689 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.126715 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.126734 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.126758 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.126782 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.126831 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.190759 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.190968 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.191069 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.191148 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.193852 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.193959 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >>>>>> >>>>>> 0.194032 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.194119 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >>>>>> >>>>>> 0.194195 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.196697 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.196837 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >>>>>> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 03 00 04 00 0d 00 00 00-0d 00 .......... >>>>>> >>>>>> 0.196993 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.197079 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.197155 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.199778 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.199887 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.199956 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.200030 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >>>>>> 0.200094 sierra/sierra/library.c (2): Value of register 0x01: 0x0d. >>>>>> 0.200164 sierra/sierra/library.c (2): Writing acknowledgement... >>>>>> 0.200233 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.200297 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.200379 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.200503 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.200573 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.202502 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.202616 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.202699 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >>>>>> 0.202780 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.202960 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 06 - . >>>>>> >>>>>> 0.203037 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.204614 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.204702 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.204790 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.204864 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.207671 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.207777 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.207851 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >>>>>> 0.207928 sierra/sierra/library.c (2): Read value of register 0x01 and wrote acknowledgement. Returning. >>>>>> 0.207999 gp_port_set_timeout (2): Setting port timeout to 50 milliseconds. >>>>>> 0.208075 sierra/sierra/library.c (2): sierra_set_string_register: reg 84, value '\' >>>>>> 0.208144 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.208210 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.208290 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.208337 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.208379 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.220383 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.220529 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.220613 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >>>>>> 0.220705 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >>>>>> >>>>>> 0.220812 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >>>>>> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 03 00 03 54 5c b3-00 .C...T\.. >>>>>> >>>>>> 0.220990 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.222478 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.222613 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.222710 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.222795 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.224056 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.224162 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.224241 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.224316 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.224381 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.224462 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.224546 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.224615 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.225824 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.225911 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.225999 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.226070 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.227821 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.227933 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >>>>>> >>>>>> 0.228005 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.228089 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.228134 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.230665 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.230790 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 06 - . >>>>>> >>>>>> 0.230938 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.231009 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.231054 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.233466 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.233566 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.233650 sierra/sierra/library.c (2): Packet type 0x06 read. Returning GP_OK. >>>>>> 0.233718 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.233785 sierra/sierra/library.c (2): Transmission successful. >>>>>> 0.233853 sierra/sierra/sierra.c (2): *** folder support: yes >>>>>> 0.233929 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >>>>>> 0.233998 sierra/sierra/sierra.c (2): Closing connection >>>>>> 0.234063 sierra/sierra/sierra.c (2): ****************** sierra initialization OK >>>>>> 0.235950 gp_camera_free (2): Freeing camera... >>>>>> 0.236023 gp_camera_exit (2): Exiting camera ('Olympus C-2040Z')... >>>>>> 0.236121 sierra/sierra/sierra.c (2): sierra camera_exit >>>>>> 0.236171 gp_port_close (2): Closing port... >>>>>> 0.236431 gp_filesystem_reset (2): resetting filesystem >>>>>> 0.236487 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >>>>>> 0.236535 gp_filesystem_lru_clear (2): fscache LRU list already empty >>>>>> 0.236568 delete_all_folders (2): Internally deleting all folders from '/'... >>>>>> 0.236604 lookup_folder (2): Lookup folder '/'... >>>>>> 0.236640 lookup_folder (2): Found! / is 0x556fb4912890 >>>>>> 0.236674 recurse_delete_folder (2): Recurse delete folder 0x556fb4912890// >>>>>> 0.236710 delete_all_files (2): Delete all files in folder 0x556fb4912890// >>>>>> 0.236744 gp_port_free (2): Freeing port... >>>>>> 0.236775 gp_port_close (2): Closing port... >>>>>> 0.236881 gp_filesystem_reset (2): resetting filesystem >>>>>> 0.236919 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >>>>>> 0.236951 gp_filesystem_lru_clear (2): fscache LRU list already empty >>>>>> 0.236983 delete_all_folders (2): Internally deleting all folders from '/'... >>>>>> 0.237014 lookup_folder (2): Lookup folder '/'... >>>>>> 0.237047 lookup_folder (2): Found! / is 0x556fb4912890 >>>>>> 0.237081 recurse_delete_folder (2): Recurse delete folder 0x556fb4912890// >>>>>> 0.237114 delete_all_files (2): Delete all files in folder 0x556fb4912890// >>>>>> 0.000020 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >>>>>> 0.000166 main (2): gphoto2 2.5.23 >>>>>> 0.000196 main (2): gphoto2 has been compiled with the following options: >>>>>> 0.000222 main (2): + gcc (C compiler used) >>>>>> 0.000245 main (2): + popt (mandatory, for handling command-line parameters) >>>>>> 0.000268 main (2): + exif (for displaying EXIF information) >>>>>> 0.000291 main (2): + cdk (for accessing configuration options) >>>>>> 0.000315 main (2): + aa (for displaying live previews) >>>>>> 0.000338 main (2): + jpeg (for displaying live previews in JPEG format) >>>>>> 0.000361 main (2): + readline (for easy navigation in the shell) >>>>>> 0.000396 main (2): libgphoto2 2.5.25 >>>>>> 0.000422 main (2): libgphoto2 has been compiled with the following options: >>>>>> 0.000449 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >>>>>> 0.000471 main (2): + gcc (C compiler used) >>>>>> 0.000493 main (2): + ltdl (for portable loading of camlibs) >>>>>> 0.000515 main (2): + EXIF (for special handling of EXIF files) >>>>>> 0.000547 main (2): libgphoto2_port 0.12.0 >>>>>> 0.000573 main (2): libgphoto2_port has been compiled with the following options: >>>>>> 0.000596 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >>>>>> 0.000618 main (2): + gcc (C compiler used) >>>>>> 0.000640 main (2): + ltdl (for portable loading of iolibs) >>>>>> 0.000662 main (2): + EXIF (for vusb) >>>>>> 0.000684 main (2): + USB (libusb1, for USB cameras) >>>>>> 0.000706 main (2): + serial (for serial cameras) >>>>>> 0.000728 main (2): + no resmgr (serial port access and locking) >>>>>> 0.000751 main (2): + no ttylock (serial port locking) >>>>>> 0.000773 main (2): + no lockdev (serial port locking) >>>>>> 0.000795 main (2): CAMLIBS env var not set, using compile-time default instead >>>>>> 0.000817 main (2): IOLIBS env var not set, using compile-time default instead >>>>>> 0.000839 main (2): invoked with following arguments: >>>>>> 0.000891 main (2): --debug >>>>>> 0.000914 main (2): --debug-logfile=my-logfile.txt >>>>>> 0.000935 main (2): --capture-tethered >>>>>> 0.000998 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >>>>>> 0.001137 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >>>>>> 0.001366 main (2): The user has not specified both a model and a port. Try to figure them out. >>>>>> 0.001406 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >>>>>> 0.001614 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.002080 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >>>>>> 0.002136 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >>>>>> 0.002184 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >>>>>> 0.002379 gp_port_library_list (2): found mtab fsname sysfs >>>>>> 0.002409 gp_port_library_list (2): found mtab fsname proc >>>>>> 0.002438 gp_port_library_list (2): found mtab fsname udev >>>>>> 0.002491 gp_port_library_list (2): found mtab fsname devpts >>>>>> 0.002521 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.002572 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >>>>>> 0.003261 gp_port_library_list (2): found mtab fsname /dev/loop0 >>>>>> 0.003347 gp_port_library_list (2): found mtab fsname securityfs >>>>>> 0.003377 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.003436 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.003490 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.003552 gp_port_library_list (2): found mtab fsname cgroup2 >>>>>> 0.003582 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003610 gp_port_library_list (2): found mtab fsname pstore >>>>>> 0.003743 gp_port_library_list (2): found mtab fsname efivarfs >>>>>> 0.003797 gp_port_library_list (2): found mtab fsname none >>>>>> 0.003847 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003876 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003904 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003932 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003960 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003987 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004015 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004043 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004071 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004099 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004126 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004234 gp_port_library_list (2): found mtab fsname systemd-1 >>>>>> 0.004263 gp_port_library_list (2): found mtab fsname hugetlbfs >>>>>> 0.004319 gp_port_library_list (2): found mtab fsname mqueue >>>>>> 0.004349 gp_port_library_list (2): found mtab fsname debugfs >>>>>> 0.004400 gp_port_library_list (2): found mtab fsname tracefs >>>>>> 0.004451 gp_port_library_list (2): found mtab fsname fusectl >>>>>> 0.004480 gp_port_library_list (2): found mtab fsname configfs >>>>>> 0.004538 gp_port_library_list (2): found mtab fsname /dev/loop1 >>>>>> 0.004586 gp_port_library_list (2): found mtab fsname /dev/loop2 >>>>>> 0.004635 gp_port_library_list (2): found mtab fsname /dev/loop3 >>>>>> 0.004682 gp_port_library_list (2): found mtab fsname /dev/loop4 >>>>>> 0.004730 gp_port_library_list (2): found mtab fsname /dev/loop5 >>>>>> 0.004775 gp_port_library_list (2): found mtab fsname /dev/loop6 >>>>>> 0.004820 gp_port_library_list (2): found mtab fsname /dev/loop8 >>>>>> 0.004865 gp_port_library_list (2): found mtab fsname /dev/loop7 >>>>>> 0.004974 gp_port_library_list (2): found mtab fsname /dev/loop10 >>>>>> 0.005021 gp_port_library_list (2): found mtab fsname /dev/loop9 >>>>>> 0.005067 gp_port_library_list (2): found mtab fsname /dev/loop11 >>>>>> 0.005145 gp_port_library_list (2): found mtab fsname /dev/loop12 >>>>>> 0.005191 gp_port_library_list (2): found mtab fsname /dev/loop13 >>>>>> 0.005238 gp_port_library_list (2): found mtab fsname /dev/loop14 >>>>>> 0.005283 gp_port_library_list (2): found mtab fsname /dev/loop15 >>>>>> 0.005369 gp_port_library_list (2): found mtab fsname /dev/loop16 >>>>>> 0.005415 gp_port_library_list (2): found mtab fsname /dev/loop17 >>>>>> 0.005469 gp_port_library_list (2): found mtab fsname /dev/loop18 >>>>>> 0.005508 gp_port_library_list (2): found mtab fsname /dev/loop19 >>>>>> 0.005548 gp_port_library_list (2): found mtab fsname /dev/loop20 >>>>>> 0.005588 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >>>>>> 0.005626 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.005679 gp_port_library_list (2): found mtab fsname gvfsd-fuse >>>>>> 0.005802 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.005825 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006162 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006189 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006210 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006229 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006249 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006893 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006925 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007136 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007161 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007185 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007206 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007226 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007249 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007269 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007290 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007311 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007331 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007352 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007372 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007392 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007412 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007463 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007484 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007505 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007525 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007545 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007565 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007585 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007605 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007626 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007645 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007665 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007686 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007706 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007726 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007745 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007765 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007786 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007806 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007825 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.023548 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.023611 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.023636 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,012') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.023658 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >>>>>> 0.024379 foreach_func (2): Loaded 'USB Mass Storage direct IO' ('usbdiskdirect:/dev/sda') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >>>>>> 0.024427 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >>>>>> 0.024999 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >>>>>> 0.025035 gp_port_info_list_count (2): Counting entries (44 available)... >>>>>> 0.025059 gp_port_info_list_count (2): 39 regular entries available. >>>>>> 0.025143 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >>>>>> 0.025297 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >>>>>> 0.025354 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >>>>>> 0.025380 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >>>>>> 0.025402 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >>>>>> 0.025424 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >>>>>> 0.025446 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >>>>>> 0.025467 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >>>>>> 0.025488 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >>>>>> 0.025508 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >>>>>> 0.025528 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >>>>>> 0.025549 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >>>>>> 0.025570 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >>>>>> 0.025591 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >>>>>> 0.025612 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >>>>>> 0.025633 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >>>>>> 0.025655 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >>>>>> 0.025677 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >>>>>> 0.025698 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >>>>>> 0.025723 gp_abilities_list_load_dir (2): Found 18 camera drivers. >>>>>> 0.076470 gp_port_info_list_count (2): Counting entries (44 available)... >>>>>> 0.076569 gp_port_info_list_count (2): 39 regular entries available. >>>>>> 0.076594 gp_port_new (2): Creating new device... >>>>>> 0.076622 gp_port_info_list_get_info (2): Getting info of entry 0 (44 available)... >>>>>> 0.077042 gp_port_set_settings (2): Setting settings... >>>>>> 0.077072 gp_port_info_list_get_info (2): Getting info of entry 1 (44 available)... >>>>>> 0.077410 gp_port_set_settings (2): Setting settings... >>>>>> 0.077447 gp_port_info_list_get_info (2): Getting info of entry 2 (44 available)... >>>>>> 0.077804 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077835 gp_port_set_settings (2): Setting settings... >>>>>> 0.077858 gp_port_info_list_get_info (2): Getting info of entry 3 (44 available)... >>>>>> 0.078145 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078170 gp_port_set_settings (2): Setting settings... >>>>>> 0.078193 gp_port_info_list_get_info (2): Getting info of entry 4 (44 available)... >>>>>> 0.078471 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078495 gp_port_set_settings (2): Setting settings... >>>>>> 0.078517 gp_port_info_list_get_info (2): Getting info of entry 5 (44 available)... >>>>>> 0.078794 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078817 gp_port_set_settings (2): Setting settings... >>>>>> 0.078840 gp_port_info_list_get_info (2): Getting info of entry 6 (44 available)... >>>>>> 0.079120 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079144 gp_port_set_settings (2): Setting settings... >>>>>> 0.079167 gp_port_info_list_get_info (2): Getting info of entry 7 (44 available)... >>>>>> 0.079445 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079469 gp_port_set_settings (2): Setting settings... >>>>>> 0.079493 gp_port_info_list_get_info (2): Getting info of entry 8 (44 available)... >>>>>> 0.079772 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079824 gp_port_set_settings (2): Setting settings... >>>>>> 0.079847 gp_port_info_list_get_info (2): Getting info of entry 9 (44 available)... >>>>>> 0.080130 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080154 gp_port_set_settings (2): Setting settings... >>>>>> 0.080177 gp_port_info_list_get_info (2): Getting info of entry 10 (44 available)... >>>>>> 0.080456 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080480 gp_port_set_settings (2): Setting settings... >>>>>> 0.080503 gp_port_info_list_get_info (2): Getting info of entry 11 (44 available)... >>>>>> 0.080782 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080806 gp_port_set_settings (2): Setting settings... >>>>>> 0.080829 gp_port_info_list_get_info (2): Getting info of entry 12 (44 available)... >>>>>> 0.081109 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081136 gp_port_set_settings (2): Setting settings... >>>>>> 0.081160 gp_port_info_list_get_info (2): Getting info of entry 13 (44 available)... >>>>>> 0.081482 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081514 gp_port_set_settings (2): Setting settings... >>>>>> 0.081537 gp_port_info_list_get_info (2): Getting info of entry 14 (44 available)... >>>>>> 0.081819 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081843 gp_port_set_settings (2): Setting settings... >>>>>> 0.081865 gp_port_info_list_get_info (2): Getting info of entry 15 (44 available)... >>>>>> 0.082142 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082166 gp_port_set_settings (2): Setting settings... >>>>>> 0.082189 gp_port_info_list_get_info (2): Getting info of entry 16 (44 available)... >>>>>> 0.082465 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082488 gp_port_set_settings (2): Setting settings... >>>>>> 0.082511 gp_port_info_list_get_info (2): Getting info of entry 17 (44 available)... >>>>>> 0.082787 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082811 gp_port_set_settings (2): Setting settings... >>>>>> 0.082834 gp_port_info_list_get_info (2): Getting info of entry 18 (44 available)... >>>>>> 0.083112 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083136 gp_port_set_settings (2): Setting settings... >>>>>> 0.083159 gp_port_info_list_get_info (2): Getting info of entry 19 (44 available)... >>>>>> 0.083438 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083460 gp_port_set_settings (2): Setting settings... >>>>>> 0.083480 gp_port_info_list_get_info (2): Getting info of entry 20 (44 available)... >>>>>> 0.083727 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083748 gp_port_set_settings (2): Setting settings... >>>>>> 0.083768 gp_port_info_list_get_info (2): Getting info of entry 21 (44 available)... >>>>>> 0.084015 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.084037 gp_port_set_settings (2): Setting settings... >>>>>> 0.084057 gp_port_info_list_get_info (2): Getting info of entry 22 (44 available)... >>>>>> 0.084307 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.084332 gp_port_set_settings (2): Setting settings... >>>>>> 0.084353 gp_port_info_list_get_info (2): Getting info of entry 23 (44 available)... >>>>>> 0.084628 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.084657 gp_port_set_settings (2): Setting settings... >>>>>> 0.084678 gp_port_info_list_get_info (2): Getting info of entry 24 (44 available)... >>>>>> 0.084973 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.085000 gp_port_set_settings (2): Setting settings... >>>>>> 0.085021 gp_port_info_list_get_info (2): Getting info of entry 25 (44 available)... >>>>>> 0.085288 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.085333 gp_port_set_settings (2): Setting settings... >>>>>> 0.085355 gp_port_info_list_get_info (2): Getting info of entry 26 (44 available)... >>>>>> 0.085652 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.085726 gp_port_set_settings (2): Setting settings... >>>>>> 0.085749 gp_port_info_list_get_info (2): Getting info of entry 27 (44 available)... >>>>>> 0.086080 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.086108 gp_port_set_settings (2): Setting settings... >>>>>> 0.086130 gp_port_info_list_get_info (2): Getting info of entry 28 (44 available)... >>>>>> 0.086394 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.086417 gp_port_set_settings (2): Setting settings... >>>>>> 0.086438 gp_port_info_list_get_info (2): Getting info of entry 29 (44 available)... >>>>>> 0.086736 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.086766 gp_port_set_settings (2): Setting settings... >>>>>> 0.086788 gp_port_info_list_get_info (2): Getting info of entry 30 (44 available)... >>>>>> 0.087060 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.087082 gp_port_set_settings (2): Setting settings... >>>>>> 0.087103 gp_port_info_list_get_info (2): Getting info of entry 31 (44 available)... >>>>>> 0.087372 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.087398 gp_port_set_settings (2): Setting settings... >>>>>> 0.087419 gp_port_info_list_get_info (2): Getting info of entry 32 (44 available)... >>>>>> 0.087685 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.087707 gp_port_set_settings (2): Setting settings... >>>>>> 0.087727 gp_port_info_list_get_info (2): Getting info of entry 33 (44 available)... >>>>>> 0.087977 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.087998 gp_port_set_settings (2): Setting settings... >>>>>> 0.088019 gp_port_info_list_get_info (2): Getting info of entry 34 (44 available)... >>>>>> 0.088265 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.088286 gp_port_set_settings (2): Setting settings... >>>>>> 0.088306 gp_port_info_list_get_info (2): Getting info of entry 35 (44 available)... >>>>>> 0.100850 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.100908 gp_port_set_settings (2): Setting settings... >>>>>> 0.100951 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >>>>>> 0.100972 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.100992 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.102154 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.103002 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.103121 gp_port_info_list_get_info (2): Getting info of entry 36 (44 available)... >>>>>> 0.116982 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.117037 gp_port_set_settings (2): Setting settings... >>>>>> 0.117077 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,012, (new int=0, conf=-1, alt=-1) port usb:001,012 >>>>>> 0.117097 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.117118 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.118408 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.119290 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.119417 gp_port_info_list_get_info (2): Getting info of entry 37 (44 available)... >>>>>> 0.120355 gp_port_set_settings (2): Setting settings... >>>>>> 0.120397 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.120667 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >>>>>> 0.121021 gp_port_set_settings (2): Setting settings... >>>>>> 0.121046 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.122373 gp_abilities_list_detect_usb(2): Found 'Olympus C-2040Z' (0x7b4,0x105) >>>>>> 0.122407 gp_port_free (2): Freeing port... >>>>>> 0.122456 gp_port_close (2): Closing port... >>>>>> 0.122801 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >>>>>> 0.122827 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >>>>>> 0.122851 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >>>>>> 0.123125 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (44 entries available)... >>>>>> 0.123152 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >>>>>> 0.123174 gp_camera_set_port_info (2): Setting port info for port 'USB Mass Storage raw SCSI' at 'usbscsi:/dev/sg0'... >>>>>> 0.123553 gp_port_set_settings (2): Setting settings... >>>>>> 0.123588 gp_setting_set (2): Setting key 'port' to value 'usbscsi:/dev/sg0' (gphoto2) >>>>>> 0.123611 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >>>>>> 0.123920 gp_camera_init (2): Initializing camera... >>>>>> 0.123943 gp_camera_init (2): Loading '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'... >>>>>> 0.124400 gp_port_open (2): Opening port... >>>>>> 0.124503 gp_port_usbscsi_lock (2): Trying to lock '/dev/sg0'... >>>>>> 0.124554 gp_port_set_settings (2): Setting settings... >>>>>> 0.124579 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >>>>>> 0.124600 sierra/sierra/library.c (2): Sending initialization sequence to the camera >>>>>> 0.124650 sierra/sierra/sierra.c (2): Establishing connection >>>>>> 0.124671 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.124694 sierra/sierra/library.c (2): sierra_get_int_register: register 0x01... >>>>>> 0.124714 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.124733 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.124759 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.124783 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.124804 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.125586 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.125618 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.125642 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >>>>>> 0.125667 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >>>>>> >>>>>> 0.125697 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >>>>>> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 02 00 01 01 02 00- .C...... >>>>>> >>>>>> 0.125718 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.126838 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.126892 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.126918 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.126939 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.128621 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.128667 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.128700 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.128732 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.128761 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.128797 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.128832 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.128907 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.191397 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.191584 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.191668 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.191734 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.193818 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.193968 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >>>>>> >>>>>> 0.194041 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.194128 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >>>>>> >>>>>> 0.194203 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.195428 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.195595 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >>>>>> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 03 00 04 00 0d 00 00 00-0d 00 .......... >>>>>> >>>>>> 0.195671 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.195755 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.195828 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.197013 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.197132 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.197210 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.197287 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >>>>>> 0.197438 sierra/sierra/library.c (2): Value of register 0x01: 0x0d. >>>>>> 0.197519 sierra/sierra/library.c (2): Writing acknowledgement... >>>>>> 0.197594 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.197705 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.197786 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.197866 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.197937 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.198766 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.198854 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.198938 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >>>>>> 0.199021 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.199122 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 06 - . >>>>>> >>>>>> 0.199194 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.200480 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.200595 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.200639 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.200675 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.203522 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.203640 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.203678 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >>>>>> 0.203715 sierra/sierra/library.c (2): Read value of register 0x01 and wrote acknowledgement. Returning. >>>>>> 0.203749 gp_port_set_timeout (2): Setting port timeout to 50 milliseconds. >>>>>> 0.203784 sierra/sierra/library.c (2): sierra_set_string_register: reg 84, value '\' >>>>>> 0.203817 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.203848 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.203887 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.203925 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.203959 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.215431 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.215552 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.215613 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >>>>>> 0.215681 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >>>>>> >>>>>> 0.215765 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >>>>>> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 03 00 03 54 5c b3-00 .C...T\.. >>>>>> >>>>>> 0.215822 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.217357 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.217428 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.217495 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.217553 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.219182 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.219267 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.219325 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.219381 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.219432 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.219492 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.219551 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.219605 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.221389 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.221502 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.221543 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.221575 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.223187 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.223253 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >>>>>> >>>>>> 0.223299 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.223352 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.223396 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.224711 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.224790 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 06 - . >>>>>> >>>>>> 0.224868 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.224909 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.224945 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.226351 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.226521 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.226556 sierra/sierra/library.c (2): Packet type 0x06 read. Returning GP_OK. >>>>>> 0.226586 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.226613 sierra/sierra/library.c (2): Transmission successful. >>>>>> 0.226642 sierra/sierra/sierra.c (2): *** folder support: yes >>>>>> 0.226676 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >>>>>> 0.226709 sierra/sierra/sierra.c (2): Closing connection >>>>>> 0.226737 sierra/sierra/sierra.c (2): ****************** sierra initialization OK >>>>>> 0.228106 gp_camera_free (2): Freeing camera... >>>>>> 0.228155 gp_camera_exit (2): Exiting camera ('Olympus C-2040Z')... >>>>>> 0.228184 sierra/sierra/sierra.c (2): sierra camera_exit >>>>>> 0.228215 gp_port_close (2): Closing port... >>>>>> 0.228373 gp_filesystem_reset (2): resetting filesystem >>>>>> 0.228410 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >>>>>> 0.228439 gp_filesystem_lru_clear (2): fscache LRU list already empty >>>>>> 0.228469 delete_all_folders (2): Internally deleting all folders from '/'... >>>>>> 0.228502 lookup_folder (2): Lookup folder '/'... >>>>>> 0.228534 lookup_folder (2): Found! / is 0x5580db42c890 >>>>>> 0.228565 recurse_delete_folder (2): Recurse delete folder 0x5580db42c890// >>>>>> 0.228595 delete_all_files (2): Delete all files in folder 0x5580db42c890// >>>>>> 0.228623 gp_port_free (2): Freeing port... >>>>>> 0.228650 gp_port_close (2): Closing port... >>>>>> 0.228748 gp_filesystem_reset (2): resetting filesystem >>>>>> 0.228780 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >>>>>> 0.228808 gp_filesystem_lru_clear (2): fscache LRU list already empty >>>>>> 0.228836 delete_all_folders (2): Internally deleting all folders from '/'... >>>>>> 0.228864 lookup_folder (2): Lookup folder '/'... >>>>>> 0.228893 lookup_folder (2): Found! / is 0x5580db42c890 >>>>>> 0.228922 recurse_delete_folder (2): Recurse delete folder 0x5580db42c890// >>>>>> 0.228950 delete_all_files (2): Delete all files in folder 0x5580db42c890// >>>>>> 0.000017 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >>>>>> 0.000126 main (2): gphoto2 2.5.23 >>>>>> 0.000150 main (2): gphoto2 has been compiled with the following options: >>>>>> 0.000170 main (2): + gcc (C compiler used) >>>>>> 0.000188 main (2): + popt (mandatory, for handling command-line parameters) >>>>>> 0.000206 main (2): + exif (for displaying EXIF information) >>>>>> 0.000223 main (2): + cdk (for accessing configuration options) >>>>>> 0.000241 main (2): + aa (for displaying live previews) >>>>>> 0.000261 main (2): + jpeg (for displaying live previews in JPEG format) >>>>>> 0.000279 main (2): + readline (for easy navigation in the shell) >>>>>> 0.000313 main (2): libgphoto2 2.5.25 >>>>>> 0.000333 main (2): libgphoto2 has been compiled with the following options: >>>>>> 0.000356 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >>>>>> 0.000404 main (2): + gcc (C compiler used) >>>>>> 0.000423 main (2): + ltdl (for portable loading of camlibs) >>>>>> 0.000443 main (2): + EXIF (for special handling of EXIF files) >>>>>> 0.000470 main (2): libgphoto2_port 0.12.0 >>>>>> 0.000491 main (2): libgphoto2_port has been compiled with the following options: >>>>>> 0.000510 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >>>>>> 0.000527 main (2): + gcc (C compiler used) >>>>>> 0.000545 main (2): + ltdl (for portable loading of iolibs) >>>>>> 0.000563 main (2): + EXIF (for vusb) >>>>>> 0.000580 main (2): + USB (libusb1, for USB cameras) >>>>>> 0.000598 main (2): + serial (for serial cameras) >>>>>> 0.000615 main (2): + no resmgr (serial port access and locking) >>>>>> 0.000632 main (2): + no ttylock (serial port locking) >>>>>> 0.000650 main (2): + no lockdev (serial port locking) >>>>>> 0.000668 main (2): CAMLIBS env var not set, using compile-time default instead >>>>>> 0.000685 main (2): IOLIBS env var not set, using compile-time default instead >>>>>> 0.000702 main (2): invoked with following arguments: >>>>>> 0.000720 main (2): --debug >>>>>> 0.000738 main (2): --debug-logfile=my-logfile.txt >>>>>> 0.000755 main (2): --capture-tethered >>>>>> 0.000810 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >>>>>> 0.000939 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >>>>>> 0.001097 main (2): The user has not specified both a model and a port. Try to figure them out. >>>>>> 0.001122 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >>>>>> 0.001294 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.001743 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >>>>>> 0.001792 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >>>>>> 0.001833 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >>>>>> 0.002007 gp_port_library_list (2): found mtab fsname sysfs >>>>>> 0.002032 gp_port_library_list (2): found mtab fsname proc >>>>>> 0.002056 gp_port_library_list (2): found mtab fsname udev >>>>>> 0.002101 gp_port_library_list (2): found mtab fsname devpts >>>>>> 0.002126 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.002169 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >>>>>> 0.003397 gp_port_library_list (2): found mtab fsname /dev/loop0 >>>>>> 0.003468 gp_port_library_list (2): found mtab fsname securityfs >>>>>> 0.003513 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.003596 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.003677 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.003768 gp_port_library_list (2): found mtab fsname cgroup2 >>>>>> 0.003813 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003853 gp_port_library_list (2): found mtab fsname pstore >>>>>> 0.003973 gp_port_library_list (2): found mtab fsname efivarfs >>>>>> 0.004024 gp_port_library_list (2): found mtab fsname none >>>>>> 0.004073 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004101 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004127 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004154 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004180 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004208 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004234 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004260 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004286 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004341 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004369 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.004463 gp_port_library_list (2): found mtab fsname systemd-1 >>>>>> 0.004491 gp_port_library_list (2): found mtab fsname hugetlbfs >>>>>> 0.004544 gp_port_library_list (2): found mtab fsname mqueue >>>>>> 0.004572 gp_port_library_list (2): found mtab fsname debugfs >>>>>> 0.004621 gp_port_library_list (2): found mtab fsname tracefs >>>>>> 0.004669 gp_port_library_list (2): found mtab fsname fusectl >>>>>> 0.004696 gp_port_library_list (2): found mtab fsname configfs >>>>>> 0.004758 gp_port_library_list (2): found mtab fsname /dev/loop1 >>>>>> 0.004799 gp_port_library_list (2): found mtab fsname /dev/loop2 >>>>>> 0.004838 gp_port_library_list (2): found mtab fsname /dev/loop3 >>>>>> 0.004876 gp_port_library_list (2): found mtab fsname /dev/loop4 >>>>>> 0.004915 gp_port_library_list (2): found mtab fsname /dev/loop5 >>>>>> 0.004953 gp_port_library_list (2): found mtab fsname /dev/loop6 >>>>>> 0.004992 gp_port_library_list (2): found mtab fsname /dev/loop8 >>>>>> 0.005031 gp_port_library_list (2): found mtab fsname /dev/loop7 >>>>>> 0.005125 gp_port_library_list (2): found mtab fsname /dev/loop10 >>>>>> 0.005165 gp_port_library_list (2): found mtab fsname /dev/loop9 >>>>>> 0.005204 gp_port_library_list (2): found mtab fsname /dev/loop11 >>>>>> 0.005243 gp_port_library_list (2): found mtab fsname /dev/loop12 >>>>>> 0.005282 gp_port_library_list (2): found mtab fsname /dev/loop13 >>>>>> 0.005321 gp_port_library_list (2): found mtab fsname /dev/loop14 >>>>>> 0.005360 gp_port_library_list (2): found mtab fsname /dev/loop15 >>>>>> 0.005430 gp_port_library_list (2): found mtab fsname /dev/loop16 >>>>>> 0.005474 gp_port_library_list (2): found mtab fsname /dev/loop17 >>>>>> 0.005516 gp_port_library_list (2): found mtab fsname /dev/loop18 >>>>>> 0.005556 gp_port_library_list (2): found mtab fsname /dev/loop19 >>>>>> 0.005596 gp_port_library_list (2): found mtab fsname /dev/loop20 >>>>>> 0.005638 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >>>>>> 0.005677 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.005729 gp_port_library_list (2): found mtab fsname gvfsd-fuse >>>>>> 0.005838 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.005862 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006176 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006201 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006222 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006241 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006261 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007181 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007223 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007244 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007265 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007286 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007306 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007350 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007372 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007392 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007412 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007432 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007452 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007472 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007492 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007512 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007531 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007552 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007572 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007591 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007611 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007631 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007651 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007671 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007691 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007711 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007730 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007750 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007770 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007789 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007809 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007829 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007848 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007868 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007904 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007924 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.022458 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.022534 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.022572 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,012') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.022592 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >>>>>> 0.023189 foreach_func (2): Loaded 'USB Mass Storage direct IO' ('usbdiskdirect:/dev/sda') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >>>>>> 0.023220 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >>>>>> 0.023712 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >>>>>> 0.023743 gp_port_info_list_count (2): Counting entries (44 available)... >>>>>> 0.023764 gp_port_info_list_count (2): 39 regular entries available. >>>>>> 0.023816 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >>>>>> 0.023960 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >>>>>> 0.023983 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >>>>>> 0.024002 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >>>>>> 0.024021 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >>>>>> 0.024040 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >>>>>> 0.024059 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >>>>>> 0.024077 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >>>>>> 0.024096 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >>>>>> 0.024114 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >>>>>> 0.024132 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >>>>>> 0.024150 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >>>>>> 0.024169 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >>>>>> 0.024187 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >>>>>> 0.024206 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >>>>>> 0.024225 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >>>>>> 0.024245 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >>>>>> 0.024264 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >>>>>> 0.024282 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >>>>>> 0.024304 gp_abilities_list_load_dir (2): Found 18 camera drivers. >>>>>> 0.072422 gp_port_info_list_count (2): Counting entries (44 available)... >>>>>> 0.072508 gp_port_info_list_count (2): 39 regular entries available. >>>>>> 0.072529 gp_port_new (2): Creating new device... >>>>>> 0.072554 gp_port_info_list_get_info (2): Getting info of entry 0 (44 available)... >>>>>> 0.072941 gp_port_set_settings (2): Setting settings... >>>>>> 0.072967 gp_port_info_list_get_info (2): Getting info of entry 1 (44 available)... >>>>>> 0.073210 gp_port_set_settings (2): Setting settings... >>>>>> 0.073234 gp_port_info_list_get_info (2): Getting info of entry 2 (44 available)... >>>>>> 0.073556 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.073612 gp_port_set_settings (2): Setting settings... >>>>>> 0.073634 gp_port_info_list_get_info (2): Getting info of entry 3 (44 available)... >>>>>> 0.073899 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.073921 gp_port_set_settings (2): Setting settings... >>>>>> 0.073942 gp_port_info_list_get_info (2): Getting info of entry 4 (44 available)... >>>>>> 0.074191 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.074212 gp_port_set_settings (2): Setting settings... >>>>>> 0.074232 gp_port_info_list_get_info (2): Getting info of entry 5 (44 available)... >>>>>> 0.074477 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.074498 gp_port_set_settings (2): Setting settings... >>>>>> 0.074518 gp_port_info_list_get_info (2): Getting info of entry 6 (44 available)... >>>>>> 0.074763 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.074784 gp_port_set_settings (2): Setting settings... >>>>>> 0.074804 gp_port_info_list_get_info (2): Getting info of entry 7 (44 available)... >>>>>> 0.075048 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.075069 gp_port_set_settings (2): Setting settings... >>>>>> 0.075089 gp_port_info_list_get_info (2): Getting info of entry 8 (44 available)... >>>>>> 0.075333 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.075353 gp_port_set_settings (2): Setting settings... >>>>>> 0.075373 gp_port_info_list_get_info (2): Getting info of entry 9 (44 available)... >>>>>> 0.075617 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.075638 gp_port_set_settings (2): Setting settings... >>>>>> 0.075658 gp_port_info_list_get_info (2): Getting info of entry 10 (44 available)... >>>>>> 0.075902 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.075923 gp_port_set_settings (2): Setting settings... >>>>>> 0.075943 gp_port_info_list_get_info (2): Getting info of entry 11 (44 available)... >>>>>> 0.076186 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076207 gp_port_set_settings (2): Setting settings... >>>>>> 0.076227 gp_port_info_list_get_info (2): Getting info of entry 12 (44 available)... >>>>>> 0.076472 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076493 gp_port_set_settings (2): Setting settings... >>>>>> 0.076512 gp_port_info_list_get_info (2): Getting info of entry 13 (44 available)... >>>>>> 0.076757 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076778 gp_port_set_settings (2): Setting settings... >>>>>> 0.076798 gp_port_info_list_get_info (2): Getting info of entry 14 (44 available)... >>>>>> 0.077041 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077062 gp_port_set_settings (2): Setting settings... >>>>>> 0.077082 gp_port_info_list_get_info (2): Getting info of entry 15 (44 available)... >>>>>> 0.077326 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077347 gp_port_set_settings (2): Setting settings... >>>>>> 0.077367 gp_port_info_list_get_info (2): Getting info of entry 16 (44 available)... >>>>>> 0.077649 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077674 gp_port_set_settings (2): Setting settings... >>>>>> 0.077695 gp_port_info_list_get_info (2): Getting info of entry 17 (44 available)... >>>>>> 0.077945 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077966 gp_port_set_settings (2): Setting settings... >>>>>> 0.077987 gp_port_info_list_get_info (2): Getting info of entry 18 (44 available)... >>>>>> 0.078233 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078253 gp_port_set_settings (2): Setting settings... >>>>>> 0.078274 gp_port_info_list_get_info (2): Getting info of entry 19 (44 available)... >>>>>> 0.078520 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078540 gp_port_set_settings (2): Setting settings... >>>>>> 0.078561 gp_port_info_list_get_info (2): Getting info of entry 20 (44 available)... >>>>>> 0.078827 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078848 gp_port_set_settings (2): Setting settings... >>>>>> 0.078868 gp_port_info_list_get_info (2): Getting info of entry 21 (44 available)... >>>>>> 0.079113 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079134 gp_port_set_settings (2): Setting settings... >>>>>> 0.079154 gp_port_info_list_get_info (2): Getting info of entry 22 (44 available)... >>>>>> 0.079401 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079422 gp_port_set_settings (2): Setting settings... >>>>>> 0.079442 gp_port_info_list_get_info (2): Getting info of entry 23 (44 available)... >>>>>> 0.079689 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079709 gp_port_set_settings (2): Setting settings... >>>>>> 0.079729 gp_port_info_list_get_info (2): Getting info of entry 24 (44 available)... >>>>>> 0.079975 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079996 gp_port_set_settings (2): Setting settings... >>>>>> 0.080017 gp_port_info_list_get_info (2): Getting info of entry 25 (44 available)... >>>>>> 0.080264 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080284 gp_port_set_settings (2): Setting settings... >>>>>> 0.080304 gp_port_info_list_get_info (2): Getting info of entry 26 (44 available)... >>>>>> 0.080549 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080569 gp_port_set_settings (2): Setting settings... >>>>>> 0.080589 gp_port_info_list_get_info (2): Getting info of entry 27 (44 available)... >>>>>> 0.080837 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080858 gp_port_set_settings (2): Setting settings... >>>>>> 0.080878 gp_port_info_list_get_info (2): Getting info of entry 28 (44 available)... >>>>>> 0.081135 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081161 gp_port_set_settings (2): Setting settings... >>>>>> 0.081181 gp_port_info_list_get_info (2): Getting info of entry 29 (44 available)... >>>>>> 0.081513 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081551 gp_port_set_settings (2): Setting settings... >>>>>> 0.081572 gp_port_info_list_get_info (2): Getting info of entry 30 (44 available)... >>>>>> 0.081861 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081886 gp_port_set_settings (2): Setting settings... >>>>>> 0.081907 gp_port_info_list_get_info (2): Getting info of entry 31 (44 available)... >>>>>> 0.082214 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082250 gp_port_set_settings (2): Setting settings... >>>>>> 0.082271 gp_port_info_list_get_info (2): Getting info of entry 32 (44 available)... >>>>>> 0.082559 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082581 gp_port_set_settings (2): Setting settings... >>>>>> 0.082602 gp_port_info_list_get_info (2): Getting info of entry 33 (44 available)... >>>>>> 0.082852 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082873 gp_port_set_settings (2): Setting settings... >>>>>> 0.082893 gp_port_info_list_get_info (2): Getting info of entry 34 (44 available)... >>>>>> 0.083153 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083176 gp_port_set_settings (2): Setting settings... >>>>>> 0.083199 gp_port_info_list_get_info (2): Getting info of entry 35 (44 available)... >>>>>> 0.096451 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.096500 gp_port_set_settings (2): Setting settings... >>>>>> 0.096540 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >>>>>> 0.096560 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.096581 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.097764 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.098660 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.098819 gp_port_info_list_get_info (2): Getting info of entry 36 (44 available)... >>>>>> 0.116575 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.116640 gp_port_set_settings (2): Setting settings... >>>>>> 0.116685 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,012, (new int=0, conf=-1, alt=-1) port usb:001,012 >>>>>> 0.116705 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.116726 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.117871 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.118781 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.118891 gp_port_info_list_get_info (2): Getting info of entry 37 (44 available)... >>>>>> 0.120330 gp_port_set_settings (2): Setting settings... >>>>>> 0.120373 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.120643 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >>>>>> 0.120986 gp_port_set_settings (2): Setting settings... >>>>>> 0.121012 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.122346 gp_abilities_list_detect_usb(2): Found 'Olympus C-2040Z' (0x7b4,0x105) >>>>>> 0.122385 gp_port_free (2): Freeing port... >>>>>> 0.122405 gp_port_close (2): Closing port... >>>>>> 0.122752 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >>>>>> 0.122777 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >>>>>> 0.122800 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >>>>>> 0.123083 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (44 entries available)... >>>>>> 0.123110 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >>>>>> 0.123132 gp_camera_set_port_info (2): Setting port info for port 'USB Mass Storage raw SCSI' at 'usbscsi:/dev/sg0'... >>>>>> 0.123510 gp_port_set_settings (2): Setting settings... >>>>>> 0.123545 gp_setting_set (2): Setting key 'port' to value 'usbscsi:/dev/sg0' (gphoto2) >>>>>> 0.123568 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >>>>>> 0.123876 gp_camera_init (2): Initializing camera... >>>>>> 0.123902 gp_camera_init (2): Loading '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'... >>>>>> 0.124324 gp_port_open (2): Opening port... >>>>>> 0.124425 gp_port_usbscsi_lock (2): Trying to lock '/dev/sg0'... >>>>>> 0.124470 gp_port_set_settings (2): Setting settings... >>>>>> 0.124492 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >>>>>> 0.124511 sierra/sierra/library.c (2): Sending initialization sequence to the camera >>>>>> 0.124550 sierra/sierra/sierra.c (2): Establishing connection >>>>>> 0.124569 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.124589 sierra/sierra/library.c (2): sierra_get_int_register: register 0x01... >>>>>> 0.124607 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.124624 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.124647 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.124678 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.124697 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.126670 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.126725 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.126751 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >>>>>> 0.126776 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >>>>>> >>>>>> 0.126806 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >>>>>> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 02 00 01 01 02 00- .C...... >>>>>> >>>>>> 0.126856 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.129862 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.129948 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.129995 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.130033 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.131737 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.131828 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.131865 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.131900 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.131932 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.131970 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.132009 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.132037 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.195814 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.195965 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.196063 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.196140 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.199200 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.199344 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >>>>>> >>>>>> 0.199410 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.199486 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >>>>>> >>>>>> 0.199554 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.202843 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.203065 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >>>>>> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 03 00 04 00 0d 00 00 00-0d 00 .......... >>>>>> >>>>>> 0.203152 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.203245 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.203322 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.205314 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.205497 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.205592 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.205677 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >>>>>> 0.205754 sierra/sierra/library.c (2): Value of register 0x01: 0x0d. >>>>>> 0.205820 sierra/sierra/library.c (2): Writing acknowledgement... >>>>>> 0.205891 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.205955 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.206037 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.206165 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.206310 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.208953 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.209087 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.209175 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >>>>>> 0.209263 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.209369 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 06 - . >>>>>> >>>>>> 0.209536 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.212854 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.212991 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.213092 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.213173 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.215383 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.215552 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.215675 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >>>>>> 0.215740 sierra/sierra/library.c (2): Read value of register 0x01 and wrote acknowledgement. Returning. >>>>>> 0.215794 gp_port_set_timeout (2): Setting port timeout to 50 milliseconds. >>>>>> 0.215849 sierra/sierra/library.c (2): sierra_set_string_register: reg 84, value '\' >>>>>> 0.215902 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.215952 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.216014 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.216075 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.216129 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.229379 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.229589 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.229675 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >>>>>> 0.229858 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >>>>>> >>>>>> 0.229938 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >>>>>> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 03 00 03 54 5c b3-00 .C...T\.. >>>>>> >>>>>> 0.229998 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.232102 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.232233 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.232326 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.232402 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.234446 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.234595 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.234673 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.234749 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.234817 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.234978 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.235065 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.235142 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.236966 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.237100 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.237201 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.237282 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.239649 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.239811 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >>>>>> >>>>>> 0.239889 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.239962 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.240024 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.242825 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.243008 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 06 - . >>>>>> >>>>>> 0.243090 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.243163 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.243221 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.246382 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.246554 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.246633 sierra/sierra/library.c (2): Packet type 0x06 read. Returning GP_OK. >>>>>> 0.246688 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.246740 sierra/sierra/library.c (2): Transmission successful. >>>>>> 0.246793 sierra/sierra/sierra.c (2): *** folder support: yes >>>>>> 0.246851 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >>>>>> 0.246903 sierra/sierra/sierra.c (2): Closing connection >>>>>> 0.246957 sierra/sierra/sierra.c (2): ****************** sierra initialization OK >>>>>> 0.249364 gp_camera_free (2): Freeing camera... >>>>>> 0.249516 gp_camera_exit (2): Exiting camera ('Olympus C-2040Z')... >>>>>> 0.249576 sierra/sierra/sierra.c (2): sierra camera_exit >>>>>> 0.249634 gp_port_close (2): Closing port... >>>>>> 0.250039 gp_filesystem_reset (2): resetting filesystem >>>>>> 0.250085 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >>>>>> 0.250122 gp_filesystem_lru_clear (2): fscache LRU list already empty >>>>>> 0.250162 delete_all_folders (2): Internally deleting all folders from '/'... >>>>>> 0.250203 lookup_folder (2): Lookup folder '/'... >>>>>> 0.250248 lookup_folder (2): Found! / is 0x563d98881890 >>>>>> 0.250287 recurse_delete_folder (2): Recurse delete folder 0x563d98881890// >>>>>> 0.250329 delete_all_files (2): Delete all files in folder 0x563d98881890// >>>>>> 0.250366 gp_port_free (2): Freeing port... >>>>>> 0.250403 gp_port_close (2): Closing port... >>>>>> 0.250527 gp_filesystem_reset (2): resetting filesystem >>>>>> 0.250569 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >>>>>> 0.250607 gp_filesystem_lru_clear (2): fscache LRU list already empty >>>>>> 0.250645 delete_all_folders (2): Internally deleting all folders from '/'... >>>>>> 0.250682 lookup_folder (2): Lookup folder '/'... >>>>>> 0.250769 lookup_folder (2): Found! / is 0x563d98881890 >>>>>> 0.250810 recurse_delete_folder (2): Recurse delete folder 0x563d98881890// >>>>>> 0.250849 delete_all_files (2): Delete all files in folder 0x563d98881890// >>>>>> 0.000010 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >>>>>> 0.026453 main (2): gphoto2 2.5.23 >>>>>> 0.026524 main (2): gphoto2 has been compiled with the following options: >>>>>> 0.026565 main (2): + gcc (C compiler used) >>>>>> 0.026599 main (2): + popt (mandatory, for handling command-line parameters) >>>>>> 0.026633 main (2): + exif (for displaying EXIF information) >>>>>> 0.026665 main (2): + cdk (for accessing configuration options) >>>>>> 0.026697 main (2): + aa (for displaying live previews) >>>>>> 0.026730 main (2): + jpeg (for displaying live previews in JPEG format) >>>>>> 0.026766 main (2): + readline (for easy navigation in the shell) >>>>>> 0.026806 main (2): libgphoto2 2.5.25 >>>>>> 0.026845 main (2): libgphoto2 has been compiled with the following options: >>>>>> 0.026884 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >>>>>> 0.026918 main (2): + gcc (C compiler used) >>>>>> 0.026950 main (2): + ltdl (for portable loading of camlibs) >>>>>> 0.026983 main (2): + EXIF (for special handling of EXIF files) >>>>>> 0.027041 main (2): libgphoto2_port 0.12.0 >>>>>> 0.027078 main (2): libgphoto2_port has been compiled with the following options: >>>>>> 0.027116 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >>>>>> 0.027149 main (2): + gcc (C compiler used) >>>>>> 0.027181 main (2): + ltdl (for portable loading of iolibs) >>>>>> 0.027212 main (2): + EXIF (for vusb) >>>>>> 0.027244 main (2): + USB (libusb1, for USB cameras) >>>>>> 0.027274 main (2): + serial (for serial cameras) >>>>>> 0.027312 main (2): + no resmgr (serial port access and locking) >>>>>> 0.027344 main (2): + no ttylock (serial port locking) >>>>>> 0.027375 main (2): + no lockdev (serial port locking) >>>>>> 0.027410 main (2): CAMLIBS env var not set, using compile-time default instead >>>>>> 0.027444 main (2): IOLIBS env var not set, using compile-time default instead >>>>>> 0.027477 main (2): invoked with following arguments: >>>>>> 0.027510 main (2): --debug >>>>>> 0.027546 main (2): --debug-logfile=my-logfile.txt >>>>>> 0.027579 main (2): --capture-image >>>>>> 0.027687 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >>>>>> 0.027916 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >>>>>> 0.028079 main (2): The user has not specified both a model and a port. Try to figure them out. >>>>>> 0.028127 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >>>>>> 0.028438 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.029214 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >>>>>> 0.029313 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >>>>>> 0.029388 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >>>>>> 0.029677 gp_port_library_list (2): found mtab fsname sysfs >>>>>> 0.029730 gp_port_library_list (2): found mtab fsname proc >>>>>> 0.029776 gp_port_library_list (2): found mtab fsname udev >>>>>> 0.029941 gp_port_library_list (2): found mtab fsname devpts >>>>>> 0.030022 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.030103 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >>>>>> 0.031100 gp_port_library_list (2): found mtab fsname /dev/loop0 >>>>>> 0.031181 gp_port_library_list (2): found mtab fsname securityfs >>>>>> 0.031230 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.031316 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.031397 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.031492 gp_port_library_list (2): found mtab fsname cgroup2 >>>>>> 0.031539 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.031582 gp_port_library_list (2): found mtab fsname pstore >>>>>> 0.031772 gp_port_library_list (2): found mtab fsname efivarfs >>>>>> 0.031858 gp_port_library_list (2): found mtab fsname none >>>>>> 0.031935 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.031980 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032023 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032067 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032109 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032152 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032195 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032237 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032279 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032321 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032364 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.032518 gp_port_library_list (2): found mtab fsname systemd-1 >>>>>> 0.032567 gp_port_library_list (2): found mtab fsname hugetlbfs >>>>>> 0.032659 gp_port_library_list (2): found mtab fsname mqueue >>>>>> 0.032770 gp_port_library_list (2): found mtab fsname debugfs >>>>>> 0.032855 gp_port_library_list (2): found mtab fsname tracefs >>>>>> 0.032932 gp_port_library_list (2): found mtab fsname fusectl >>>>>> 0.033004 gp_port_library_list (2): found mtab fsname configfs >>>>>> 0.033093 gp_port_library_list (2): found mtab fsname /dev/loop1 >>>>>> 0.033163 gp_port_library_list (2): found mtab fsname /dev/loop2 >>>>>> 0.033232 gp_port_library_list (2): found mtab fsname /dev/loop3 >>>>>> 0.033301 gp_port_library_list (2): found mtab fsname /dev/loop4 >>>>>> 0.033375 gp_port_library_list (2): found mtab fsname /dev/loop5 >>>>>> 0.033444 gp_port_library_list (2): found mtab fsname /dev/loop8 >>>>>> 0.033513 gp_port_library_list (2): found mtab fsname /dev/loop6 >>>>>> 0.033581 gp_port_library_list (2): found mtab fsname /dev/loop7 >>>>>> 0.033742 gp_port_library_list (2): found mtab fsname /dev/loop9 >>>>>> 0.033817 gp_port_library_list (2): found mtab fsname /dev/loop10 >>>>>> 0.033886 gp_port_library_list (2): found mtab fsname /dev/loop11 >>>>>> 0.033986 gp_port_library_list (2): found mtab fsname /dev/loop12 >>>>>> 0.034057 gp_port_library_list (2): found mtab fsname /dev/loop13 >>>>>> 0.034126 gp_port_library_list (2): found mtab fsname /dev/loop14 >>>>>> 0.034198 gp_port_library_list (2): found mtab fsname /dev/loop15 >>>>>> 0.034268 gp_port_library_list (2): found mtab fsname /dev/loop16 >>>>>> 0.034339 gp_port_library_list (2): found mtab fsname /dev/loop17 >>>>>> 0.034409 gp_port_library_list (2): found mtab fsname /dev/loop18 >>>>>> 0.034481 gp_port_library_list (2): found mtab fsname /dev/loop19 >>>>>> 0.034551 gp_port_library_list (2): found mtab fsname /dev/loop20 >>>>>> 0.034625 gp_port_library_list (2): found mtab fsname /dev/loop21 >>>>>> 0.034700 gp_port_library_list (2): found mtab fsname /dev/loop22 >>>>>> 0.034839 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >>>>>> 0.034913 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.035814 gp_port_library_list (2): found mtab fsname gvfsd-fuse >>>>>> 0.035867 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.035948 gp_port_library_list (2): found mtab fsname nsfs >>>>>> 0.036164 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.036250 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.036976 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.037042 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.037093 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.037139 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.037174 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.038627 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.038693 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.038741 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.038788 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.038837 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.038882 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.038929 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.038974 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039020 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039065 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039111 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039156 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039201 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039247 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039292 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039338 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039384 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039429 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039475 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039520 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039565 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039611 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039703 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039753 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039799 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039845 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039890 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039936 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.039983 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.040029 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.040074 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.040120 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.040165 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.040210 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.040255 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.055277 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.055370 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.055420 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.055467 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >>>>>> 0.055994 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >>>>>> 0.056381 gp_port_info_list_count (2): Counting entries (42 available)... >>>>>> 0.056406 gp_port_info_list_count (2): 37 regular entries available. >>>>>> 0.056465 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >>>>>> 0.056594 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >>>>>> 0.056617 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >>>>>> 0.056637 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >>>>>> 0.056656 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >>>>>> 0.056675 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >>>>>> 0.056694 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >>>>>> 0.056765 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >>>>>> 0.056790 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >>>>>> 0.056810 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >>>>>> 0.056828 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >>>>>> 0.056847 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >>>>>> 0.056866 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >>>>>> 0.056909 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >>>>>> 0.056930 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >>>>>> 0.056950 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >>>>>> 0.056970 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >>>>>> 0.056990 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >>>>>> 0.057009 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >>>>>> 0.057032 gp_abilities_list_load_dir (2): Found 18 camera drivers. >>>>>> 0.104414 gp_port_info_list_count (2): Counting entries (42 available)... >>>>>> 0.104504 gp_port_info_list_count (2): 37 regular entries available. >>>>>> 0.104525 gp_port_new (2): Creating new device... >>>>>> 0.104551 gp_port_info_list_get_info (2): Getting info of entry 0 (42 available)... >>>>>> 0.105304 gp_port_set_settings (2): Setting settings... >>>>>> 0.105343 gp_port_info_list_get_info (2): Getting info of entry 1 (42 available)... >>>>>> 0.105591 gp_port_set_settings (2): Setting settings... >>>>>> 0.105614 gp_port_info_list_get_info (2): Getting info of entry 2 (42 available)... >>>>>> 0.105883 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.105904 gp_port_set_settings (2): Setting settings... >>>>>> 0.105925 gp_port_info_list_get_info (2): Getting info of entry 3 (42 available)... >>>>>> 0.106172 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.106193 gp_port_set_settings (2): Setting settings... >>>>>> 0.106214 gp_port_info_list_get_info (2): Getting info of entry 4 (42 available)... >>>>>> 0.106459 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.106480 gp_port_set_settings (2): Setting settings... >>>>>> 0.106500 gp_port_info_list_get_info (2): Getting info of entry 5 (42 available)... >>>>>> 0.106797 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.106819 gp_port_set_settings (2): Setting settings... >>>>>> 0.106843 gp_port_info_list_get_info (2): Getting info of entry 6 (42 available)... >>>>>> 0.107096 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.107117 gp_port_set_settings (2): Setting settings... >>>>>> 0.107137 gp_port_info_list_get_info (2): Getting info of entry 7 (42 available)... >>>>>> 0.107383 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.107404 gp_port_set_settings (2): Setting settings... >>>>>> 0.107424 gp_port_info_list_get_info (2): Getting info of entry 8 (42 available)... >>>>>> 0.107669 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.107690 gp_port_set_settings (2): Setting settings... >>>>>> 0.107710 gp_port_info_list_get_info (2): Getting info of entry 9 (42 available)... >>>>>> 0.107954 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.107975 gp_port_set_settings (2): Setting settings... >>>>>> 0.107995 gp_port_info_list_get_info (2): Getting info of entry 10 (42 available)... >>>>>> 0.108239 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.108260 gp_port_set_settings (2): Setting settings... >>>>>> 0.108280 gp_port_info_list_get_info (2): Getting info of entry 11 (42 available)... >>>>>> 0.108525 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.108545 gp_port_set_settings (2): Setting settings... >>>>>> 0.108566 gp_port_info_list_get_info (2): Getting info of entry 12 (42 available)... >>>>>> 0.108838 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.108863 gp_port_set_settings (2): Setting settings... >>>>>> 0.108883 gp_port_info_list_get_info (2): Getting info of entry 13 (42 available)... >>>>>> 0.109132 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.109153 gp_port_set_settings (2): Setting settings... >>>>>> 0.109173 gp_port_info_list_get_info (2): Getting info of entry 14 (42 available)... >>>>>> 0.109446 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.109468 gp_port_set_settings (2): Setting settings... >>>>>> 0.109488 gp_port_info_list_get_info (2): Getting info of entry 15 (42 available)... >>>>>> 0.109733 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.109754 gp_port_set_settings (2): Setting settings... >>>>>> 0.109774 gp_port_info_list_get_info (2): Getting info of entry 16 (42 available)... >>>>>> 0.110021 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.110041 gp_port_set_settings (2): Setting settings... >>>>>> 0.110062 gp_port_info_list_get_info (2): Getting info of entry 17 (42 available)... >>>>>> 0.110307 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.110328 gp_port_set_settings (2): Setting settings... >>>>>> 0.110348 gp_port_info_list_get_info (2): Getting info of entry 18 (42 available)... >>>>>> 0.110594 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.110615 gp_port_set_settings (2): Setting settings... >>>>>> 0.110635 gp_port_info_list_get_info (2): Getting info of entry 19 (42 available)... >>>>>> 0.110880 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.110901 gp_port_set_settings (2): Setting settings... >>>>>> 0.110921 gp_port_info_list_get_info (2): Getting info of entry 20 (42 available)... >>>>>> 0.111165 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.111186 gp_port_set_settings (2): Setting settings... >>>>>> 0.111206 gp_port_info_list_get_info (2): Getting info of entry 21 (42 available)... >>>>>> 0.111450 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.111471 gp_port_set_settings (2): Setting settings... >>>>>> 0.111492 gp_port_info_list_get_info (2): Getting info of entry 22 (42 available)... >>>>>> 0.111736 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.111757 gp_port_set_settings (2): Setting settings... >>>>>> 0.111777 gp_port_info_list_get_info (2): Getting info of entry 23 (42 available)... >>>>>> 0.112022 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.112042 gp_port_set_settings (2): Setting settings... >>>>>> 0.112062 gp_port_info_list_get_info (2): Getting info of entry 24 (42 available)... >>>>>> 0.112307 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.112327 gp_port_set_settings (2): Setting settings... >>>>>> 0.112347 gp_port_info_list_get_info (2): Getting info of entry 25 (42 available)... >>>>>> 0.112592 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.112612 gp_port_set_settings (2): Setting settings... >>>>>> 0.112633 gp_port_info_list_get_info (2): Getting info of entry 26 (42 available)... >>>>>> 0.112902 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.112926 gp_port_set_settings (2): Setting settings... >>>>>> 0.112946 gp_port_info_list_get_info (2): Getting info of entry 27 (42 available)... >>>>>> 0.113192 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.113213 gp_port_set_settings (2): Setting settings... >>>>>> 0.113234 gp_port_info_list_get_info (2): Getting info of entry 28 (42 available)... >>>>>> 0.113513 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.113534 gp_port_set_settings (2): Setting settings... >>>>>> 0.113555 gp_port_info_list_get_info (2): Getting info of entry 29 (42 available)... >>>>>> 0.113801 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.113822 gp_port_set_settings (2): Setting settings... >>>>>> 0.113842 gp_port_info_list_get_info (2): Getting info of entry 30 (42 available)... >>>>>> 0.114089 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.114110 gp_port_set_settings (2): Setting settings... >>>>>> 0.114131 gp_port_info_list_get_info (2): Getting info of entry 31 (42 available)... >>>>>> 0.114380 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.114401 gp_port_set_settings (2): Setting settings... >>>>>> 0.114443 gp_port_info_list_get_info (2): Getting info of entry 32 (42 available)... >>>>>> 0.114691 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.114712 gp_port_set_settings (2): Setting settings... >>>>>> 0.114732 gp_port_info_list_get_info (2): Getting info of entry 33 (42 available)... >>>>>> 0.114977 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.114998 gp_port_set_settings (2): Setting settings... >>>>>> 0.115018 gp_port_info_list_get_info (2): Getting info of entry 34 (42 available)... >>>>>> 0.115263 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.115284 gp_port_set_settings (2): Setting settings... >>>>>> 0.115304 gp_port_info_list_get_info (2): Getting info of entry 35 (42 available)... >>>>>> 0.128159 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.128222 gp_port_set_settings (2): Setting settings... >>>>>> 0.128264 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >>>>>> 0.128284 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.128305 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.129447 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.130339 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.130462 gp_port_info_list_get_info (2): Getting info of entry 36 (42 available)... >>>>>> 0.145061 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.145114 gp_port_set_settings (2): Setting settings... >>>>>> 0.145156 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:, (new int=0, conf=-1, alt=-1) port usb: >>>>>> 0.145176 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.145196 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.145611 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.145661 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.145681 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.145701 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.145721 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.145740 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.145759 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.146058 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.146112 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.146148 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.146174 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.146199 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.146222 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.146246 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.146287 gp_port_free (2): Freeing port... >>>>>> 0.146308 gp_port_close (2): Closing port... >>>>>> 0.147626 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >>>>>> 0.147674 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >>>>>> 0.147704 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >>>>>> 0.148091 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (42 entries available)... >>>>>> 0.148116 gp_port_info_list_lookup_path(2): Starting regex search for 'usbscsi:/dev/sg0'... >>>>>> 0.148135 gp_port_info_list_lookup_path(2): Trying '^disk:'... >>>>>> 0.148219 gp_port_info_list_lookup_path(2): re_match failed (-1) >>>>>> 0.148239 gp_port_info_list_lookup_path(2): Trying '^ptpip:'... >>>>>> 0.148278 gp_port_info_list_lookup_path(2): re_match failed (-1) >>>>>> 0.148299 gp_port_info_list_lookup_path(2): Trying '^ip:'... >>>>>> 0.148335 gp_port_info_list_lookup_path(2): re_match failed (-1) >>>>>> 0.148355 gp_port_info_list_lookup_path(2): Trying '^serial:'... >>>>>> 0.148394 gp_port_info_list_lookup_path(2): re_match failed (-1) >>>>>> 0.148415 gp_port_info_list_lookup_path(2): Trying '^usb:'... >>>>>> 0.148457 gp_port_info_list_lookup_path(2): re_match failed (-1) >>>>>> 0.148511 gp_port_info_list_get_info (2): Getting info of entry -5 (42 available)... >>>>>> 0.148532 gp_port_info_list_get_info [gphoto2-port-info-list.c:468](0): Invalid parameters: 'n >= 0 && n < list->count' is NULL/FALSE. >>>>>> 0.148550 gp_camera_init (2): Initializing camera... >>>>>> 0.148572 gp_context_error (0): You have to set the port prior to initialization of the camera. >>>>>> 0.149731 gp_camera_free (2): Freeing camera... >>>>>> 0.149778 gp_port_free (2): Freeing port... >>>>>> 0.149802 gp_filesystem_reset (2): resetting filesystem >>>>>> 0.149823 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >>>>>> 0.149843 gp_filesystem_lru_clear (2): fscache LRU list already empty >>>>>> 0.149864 delete_all_folders (2): Internally deleting all folders from '/'... >>>>>> 0.149885 lookup_folder (2): Lookup folder '/'... >>>>>> 0.149907 lookup_folder (2): Found! / is 0x55bc9b731890 >>>>>> 0.149929 recurse_delete_folder (2): Recurse delete folder 0x55bc9b731890// >>>>>> 0.149950 delete_all_files (2): Delete all files in folder 0x55bc9b731890// >>>>>> 0.000019 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >>>>>> 0.000154 main (2): gphoto2 2.5.23 >>>>>> 0.000183 main (2): gphoto2 has been compiled with the following options: >>>>>> 0.000205 main (2): + gcc (C compiler used) >>>>>> 0.000225 main (2): + popt (mandatory, for handling command-line parameters) >>>>>> 0.000245 main (2): + exif (for displaying EXIF information) >>>>>> 0.000264 main (2): + cdk (for accessing configuration options) >>>>>> 0.000283 main (2): + aa (for displaying live previews) >>>>>> 0.000301 main (2): + jpeg (for displaying live previews in JPEG format) >>>>>> 0.000320 main (2): + readline (for easy navigation in the shell) >>>>>> 0.000356 main (2): libgphoto2 2.5.25 >>>>>> 0.000378 main (2): libgphoto2 has been compiled with the following options: >>>>>> 0.000401 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >>>>>> 0.000421 main (2): + gcc (C compiler used) >>>>>> 0.000440 main (2): + ltdl (for portable loading of camlibs) >>>>>> 0.000459 main (2): + EXIF (for special handling of EXIF files) >>>>>> 0.000490 main (2): libgphoto2_port 0.12.0 >>>>>> 0.000512 main (2): libgphoto2_port has been compiled with the following options: >>>>>> 0.000532 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >>>>>> 0.000553 main (2): + gcc (C compiler used) >>>>>> 0.000572 main (2): + ltdl (for portable loading of iolibs) >>>>>> 0.000591 main (2): + EXIF (for vusb) >>>>>> 0.000611 main (2): + USB (libusb1, for USB cameras) >>>>>> 0.000631 main (2): + serial (for serial cameras) >>>>>> 0.000695 main (2): + no resmgr (serial port access and locking) >>>>>> 0.000715 main (2): + no ttylock (serial port locking) >>>>>> 0.000734 main (2): + no lockdev (serial port locking) >>>>>> 0.000754 main (2): CAMLIBS env var not set, using compile-time default instead >>>>>> 0.000772 main (2): IOLIBS env var not set, using compile-time default instead >>>>>> 0.000791 main (2): invoked with following arguments: >>>>>> 0.000810 main (2): --debug >>>>>> 0.000827 main (2): --debug-logfile=my-logfile.txt >>>>>> 0.000845 main (2): --capture-image >>>>>> 0.000904 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >>>>>> 0.001055 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >>>>>> 0.001152 main (2): The user has not specified both a model and a port. Try to figure them out. >>>>>> 0.001204 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >>>>>> 0.001381 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.001793 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >>>>>> 0.001837 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >>>>>> 0.001878 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >>>>>> 0.002059 gp_port_library_list (2): found mtab fsname sysfs >>>>>> 0.002085 gp_port_library_list (2): found mtab fsname proc >>>>>> 0.002109 gp_port_library_list (2): found mtab fsname udev >>>>>> 0.002155 gp_port_library_list (2): found mtab fsname devpts >>>>>> 0.002180 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.002225 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >>>>>> 0.002765 gp_port_library_list (2): found mtab fsname /dev/loop0 >>>>>> 0.002813 gp_port_library_list (2): found mtab fsname securityfs >>>>>> 0.002839 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.002886 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.002933 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.002987 gp_port_library_list (2): found mtab fsname cgroup2 >>>>>> 0.003012 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003036 gp_port_library_list (2): found mtab fsname pstore >>>>>> 0.003151 gp_port_library_list (2): found mtab fsname efivarfs >>>>>> 0.003198 gp_port_library_list (2): found mtab fsname none >>>>>> 0.003240 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003574 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003599 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003623 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003646 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003670 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003694 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003717 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003741 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003764 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003789 gp_port_library_list (2): found mtab fsname cgroup >>>>>> 0.003895 gp_port_library_list (2): found mtab fsname systemd-1 >>>>>> 0.003920 gp_port_library_list (2): found mtab fsname hugetlbfs >>>>>> 0.003966 gp_port_library_list (2): found mtab fsname mqueue >>>>>> 0.003990 gp_port_library_list (2): found mtab fsname debugfs >>>>>> 0.004034 gp_port_library_list (2): found mtab fsname tracefs >>>>>> 0.004078 gp_port_library_list (2): found mtab fsname fusectl >>>>>> 0.004102 gp_port_library_list (2): found mtab fsname configfs >>>>>> 0.004151 gp_port_library_list (2): found mtab fsname /dev/loop1 >>>>>> 0.004206 gp_port_library_list (2): found mtab fsname /dev/loop2 >>>>>> 0.004258 gp_port_library_list (2): found mtab fsname /dev/loop3 >>>>>> 0.004309 gp_port_library_list (2): found mtab fsname /dev/loop4 >>>>>> 0.004390 gp_port_library_list (2): found mtab fsname /dev/loop5 >>>>>> 0.004440 gp_port_library_list (2): found mtab fsname /dev/loop8 >>>>>> 0.004490 gp_port_library_list (2): found mtab fsname /dev/loop6 >>>>>> 0.004540 gp_port_library_list (2): found mtab fsname /dev/loop7 >>>>>> 0.004637 gp_port_library_list (2): found mtab fsname /dev/loop9 >>>>>> 0.004687 gp_port_library_list (2): found mtab fsname /dev/loop10 >>>>>> 0.004736 gp_port_library_list (2): found mtab fsname /dev/loop11 >>>>>> 0.004787 gp_port_library_list (2): found mtab fsname /dev/loop12 >>>>>> 0.004841 gp_port_library_list (2): found mtab fsname /dev/loop13 >>>>>> 0.004891 gp_port_library_list (2): found mtab fsname /dev/loop14 >>>>>> 0.004942 gp_port_library_list (2): found mtab fsname /dev/loop15 >>>>>> 0.004992 gp_port_library_list (2): found mtab fsname /dev/loop16 >>>>>> 0.005043 gp_port_library_list (2): found mtab fsname /dev/loop17 >>>>>> 0.005082 gp_port_library_list (2): found mtab fsname /dev/loop18 >>>>>> 0.005121 gp_port_library_list (2): found mtab fsname /dev/loop19 >>>>>> 0.005208 gp_port_library_list (2): found mtab fsname /dev/loop20 >>>>>> 0.005263 gp_port_library_list (2): found mtab fsname /dev/loop21 >>>>>> 0.005303 gp_port_library_list (2): found mtab fsname /dev/loop22 >>>>>> 0.005380 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >>>>>> 0.005420 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.005466 gp_port_library_list (2): found mtab fsname gvfsd-fuse >>>>>> 0.005491 gp_port_library_list (2): found mtab fsname tmpfs >>>>>> 0.005538 gp_port_library_list (2): found mtab fsname nsfs >>>>>> 0.005679 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >>>>>> 0.005702 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006022 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006048 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006069 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006089 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >>>>>> 0.006108 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006731 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006757 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006777 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006798 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006818 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006838 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006858 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006878 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006898 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006919 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006960 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.006982 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007002 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007023 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007043 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007063 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007083 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007103 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007123 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007144 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007163 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007183 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007204 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007224 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007244 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007264 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007284 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007305 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007325 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007345 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007365 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007385 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007406 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007425 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >>>>>> 0.007445 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.022209 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.022282 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.022318 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,033') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >>>>>> 0.022382 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >>>>>> 0.023014 foreach_func (2): Loaded 'USB Mass Storage direct IO' ('usbdiskdirect:/dev/sda') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >>>>>> 0.023046 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >>>>>> 0.023565 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >>>>>> 0.023598 gp_port_info_list_count (2): Counting entries (44 available)... >>>>>> 0.023619 gp_port_info_list_count (2): 39 regular entries available. >>>>>> 0.023681 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >>>>>> 0.023817 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >>>>>> 0.023842 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >>>>>> 0.023863 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >>>>>> 0.023882 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >>>>>> 0.023902 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >>>>>> 0.023921 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >>>>>> 0.023940 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >>>>>> 0.023959 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >>>>>> 0.023978 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >>>>>> 0.023998 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >>>>>> 0.024016 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >>>>>> 0.024035 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >>>>>> 0.024054 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >>>>>> 0.024073 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >>>>>> 0.024093 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >>>>>> 0.024113 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >>>>>> 0.024133 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >>>>>> 0.024152 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >>>>>> 0.024175 gp_abilities_list_load_dir (2): Found 18 camera drivers. >>>>>> 0.072841 gp_port_info_list_count (2): Counting entries (44 available)... >>>>>> 0.072932 gp_port_info_list_count (2): 39 regular entries available. >>>>>> 0.072952 gp_port_new (2): Creating new device... >>>>>> 0.072978 gp_port_info_list_get_info (2): Getting info of entry 0 (44 available)... >>>>>> 0.073874 gp_port_set_settings (2): Setting settings... >>>>>> 0.073928 gp_port_info_list_get_info (2): Getting info of entry 1 (44 available)... >>>>>> 0.074231 gp_port_set_settings (2): Setting settings... >>>>>> 0.074260 gp_port_info_list_get_info (2): Getting info of entry 2 (44 available)... >>>>>> 0.074555 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.074588 gp_port_set_settings (2): Setting settings... >>>>>> 0.074611 gp_port_info_list_get_info (2): Getting info of entry 3 (44 available)... >>>>>> 0.074953 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.074990 gp_port_set_settings (2): Setting settings... >>>>>> 0.075011 gp_port_info_list_get_info (2): Getting info of entry 4 (44 available)... >>>>>> 0.075357 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.075390 gp_port_set_settings (2): Setting settings... >>>>>> 0.075412 gp_port_info_list_get_info (2): Getting info of entry 5 (44 available)... >>>>>> 0.075717 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.075740 gp_port_set_settings (2): Setting settings... >>>>>> 0.075760 gp_port_info_list_get_info (2): Getting info of entry 6 (44 available)... >>>>>> 0.076012 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076034 gp_port_set_settings (2): Setting settings... >>>>>> 0.076056 gp_port_info_list_get_info (2): Getting info of entry 7 (44 available)... >>>>>> 0.076305 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076327 gp_port_set_settings (2): Setting settings... >>>>>> 0.076347 gp_port_info_list_get_info (2): Getting info of entry 8 (44 available)... >>>>>> 0.076598 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076620 gp_port_set_settings (2): Setting settings... >>>>>> 0.076640 gp_port_info_list_get_info (2): Getting info of entry 9 (44 available)... >>>>>> 0.076889 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.076911 gp_port_set_settings (2): Setting settings... >>>>>> 0.076931 gp_port_info_list_get_info (2): Getting info of entry 10 (44 available)... >>>>>> 0.077211 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077237 gp_port_set_settings (2): Setting settings... >>>>>> 0.077258 gp_port_info_list_get_info (2): Getting info of entry 11 (44 available)... >>>>>> 0.077525 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077548 gp_port_set_settings (2): Setting settings... >>>>>> 0.077568 gp_port_info_list_get_info (2): Getting info of entry 12 (44 available)... >>>>>> 0.077823 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.077846 gp_port_set_settings (2): Setting settings... >>>>>> 0.077866 gp_port_info_list_get_info (2): Getting info of entry 13 (44 available)... >>>>>> 0.078117 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078139 gp_port_set_settings (2): Setting settings... >>>>>> 0.078160 gp_port_info_list_get_info (2): Getting info of entry 14 (44 available)... >>>>>> 0.078409 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078431 gp_port_set_settings (2): Setting settings... >>>>>> 0.078452 gp_port_info_list_get_info (2): Getting info of entry 15 (44 available)... >>>>>> 0.078700 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.078722 gp_port_set_settings (2): Setting settings... >>>>>> 0.078742 gp_port_info_list_get_info (2): Getting info of entry 16 (44 available)... >>>>>> 0.078990 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079012 gp_port_set_settings (2): Setting settings... >>>>>> 0.079033 gp_port_info_list_get_info (2): Getting info of entry 17 (44 available)... >>>>>> 0.079282 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079303 gp_port_set_settings (2): Setting settings... >>>>>> 0.079324 gp_port_info_list_get_info (2): Getting info of entry 18 (44 available)... >>>>>> 0.079572 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079593 gp_port_set_settings (2): Setting settings... >>>>>> 0.079614 gp_port_info_list_get_info (2): Getting info of entry 19 (44 available)... >>>>>> 0.079866 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.079887 gp_port_set_settings (2): Setting settings... >>>>>> 0.079908 gp_port_info_list_get_info (2): Getting info of entry 20 (44 available)... >>>>>> 0.080159 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080181 gp_port_set_settings (2): Setting settings... >>>>>> 0.080201 gp_port_info_list_get_info (2): Getting info of entry 21 (44 available)... >>>>>> 0.080450 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080472 gp_port_set_settings (2): Setting settings... >>>>>> 0.080492 gp_port_info_list_get_info (2): Getting info of entry 22 (44 available)... >>>>>> 0.080742 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.080764 gp_port_set_settings (2): Setting settings... >>>>>> 0.080804 gp_port_info_list_get_info (2): Getting info of entry 23 (44 available)... >>>>>> 0.081062 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081085 gp_port_set_settings (2): Setting settings... >>>>>> 0.081106 gp_port_info_list_get_info (2): Getting info of entry 24 (44 available)... >>>>>> 0.081382 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081408 gp_port_set_settings (2): Setting settings... >>>>>> 0.081429 gp_port_info_list_get_info (2): Getting info of entry 25 (44 available)... >>>>>> 0.081681 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.081703 gp_port_set_settings (2): Setting settings... >>>>>> 0.081723 gp_port_info_list_get_info (2): Getting info of entry 26 (44 available)... >>>>>> 0.082001 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082025 gp_port_set_settings (2): Setting settings... >>>>>> 0.082048 gp_port_info_list_get_info (2): Getting info of entry 27 (44 available)... >>>>>> 0.082327 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082351 gp_port_set_settings (2): Setting settings... >>>>>> 0.082375 gp_port_info_list_get_info (2): Getting info of entry 28 (44 available)... >>>>>> 0.082654 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.082679 gp_port_set_settings (2): Setting settings... >>>>>> 0.082702 gp_port_info_list_get_info (2): Getting info of entry 29 (44 available)... >>>>>> 0.082983 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083007 gp_port_set_settings (2): Setting settings... >>>>>> 0.083030 gp_port_info_list_get_info (2): Getting info of entry 30 (44 available)... >>>>>> 0.083309 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083334 gp_port_set_settings (2): Setting settings... >>>>>> 0.083357 gp_port_info_list_get_info (2): Getting info of entry 31 (44 available)... >>>>>> 0.083638 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083663 gp_port_set_settings (2): Setting settings... >>>>>> 0.083687 gp_port_info_list_get_info (2): Getting info of entry 32 (44 available)... >>>>>> 0.083971 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.083993 gp_port_set_settings (2): Setting settings... >>>>>> 0.084013 gp_port_info_list_get_info (2): Getting info of entry 33 (44 available)... >>>>>> 0.084265 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.084286 gp_port_set_settings (2): Setting settings... >>>>>> 0.084307 gp_port_info_list_get_info (2): Getting info of entry 34 (44 available)... >>>>>> 0.084557 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >>>>>> 0.084580 gp_port_set_settings (2): Setting settings... >>>>>> 0.084600 gp_port_info_list_get_info (2): Getting info of entry 35 (44 available)... >>>>>> 0.097614 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.097666 gp_port_set_settings (2): Setting settings... >>>>>> 0.097706 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >>>>>> 0.097726 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.097747 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.098945 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.099809 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.099931 gp_port_info_list_get_info (2): Getting info of entry 36 (44 available)... >>>>>> 0.114396 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.114465 gp_port_set_settings (2): Setting settings... >>>>>> 0.114508 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,033, (new int=0, conf=-1, alt=-1) port usb:001,033 >>>>>> 0.114528 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >>>>>> 0.114548 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.115691 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >>>>>> 0.116543 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >>>>>> 0.116653 gp_port_info_list_get_info (2): Getting info of entry 37 (44 available)... >>>>>> 0.117622 gp_port_set_settings (2): Setting settings... >>>>>> 0.117672 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.117968 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >>>>>> 0.118320 gp_port_set_settings (2): Setting settings... >>>>>> 0.118347 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >>>>>> 0.119637 gp_abilities_list_detect_usb(2): Found 'Olympus C-2040Z' (0x7b4,0x105) >>>>>> 0.119663 gp_port_free (2): Freeing port... >>>>>> 0.119683 gp_port_close (2): Closing port... >>>>>> 0.120028 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >>>>>> 0.120054 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >>>>>> 0.120077 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >>>>>> 0.120371 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (44 entries available)... >>>>>> 0.120397 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >>>>>> 0.120419 gp_camera_set_port_info (2): Setting port info for port 'USB Mass Storage raw SCSI' at 'usbscsi:/dev/sg0'... >>>>>> 0.120798 gp_port_set_settings (2): Setting settings... >>>>>> 0.120836 gp_setting_set (2): Setting key 'port' to value 'usbscsi:/dev/sg0' (gphoto2) >>>>>> 0.120859 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >>>>>> 0.121152 gp_camera_init (2): Initializing camera... >>>>>> 0.121227 gp_camera_init (2): Loading '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'... >>>>>> 0.121675 gp_port_open (2): Opening port... >>>>>> 0.121775 gp_port_usbscsi_lock (2): Trying to lock '/dev/sg0'... >>>>>> 0.121822 gp_port_set_settings (2): Setting settings... >>>>>> 0.121844 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >>>>>> 0.121874 sierra/sierra/library.c (2): Sending initialization sequence to the camera >>>>>> 0.121909 sierra/sierra/sierra.c (2): Establishing connection >>>>>> 0.121928 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.121948 sierra/sierra/library.c (2): sierra_get_int_register: register 0x01... >>>>>> 0.121966 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.121984 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.122007 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.122047 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.122069 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.123294 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.123341 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.123378 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >>>>>> 0.123415 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >>>>>> >>>>>> 0.123461 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >>>>>> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 02 00 01 01 02 00- .C...... >>>>>> >>>>>> 0.123493 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.124591 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.124632 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.124671 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.124740 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.125519 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.125554 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.125577 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.125598 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.125624 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.125645 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.125666 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.125685 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.193314 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.193416 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.193473 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.193517 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.194403 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.194504 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >>>>>> >>>>>> 0.194577 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.194664 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >>>>>> >>>>>> 0.194738 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.196782 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.196936 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >>>>>> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 03 00 04 00 0d 00 00 00-0d 00 .......... >>>>>> >>>>>> 0.197005 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.197088 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.197156 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.198442 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.198557 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.198625 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.198694 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >>>>>> 0.198757 sierra/sierra/library.c (2): Value of register 0x01: 0x0d. >>>>>> 0.198814 sierra/sierra/library.c (2): Writing acknowledgement... >>>>>> 0.198874 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.198931 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.199002 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.199116 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.199180 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.199791 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.199839 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.199886 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >>>>>> 0.199931 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.199988 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 06 - . >>>>>> >>>>>> 0.200086 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.200915 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.200978 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.201029 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.201070 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.202327 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.202423 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.202489 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >>>>>> 0.202557 sierra/sierra/library.c (2): Read value of register 0x01 and wrote acknowledgement. Returning. >>>>>> 0.202618 gp_port_set_timeout (2): Setting port timeout to 50 milliseconds. >>>>>> 0.202685 sierra/sierra/library.c (2): sierra_set_string_register: reg 84, value '\' >>>>>> 0.202745 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.202803 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.202873 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.202941 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.203002 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.217418 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.217566 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.217655 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >>>>>> 0.217732 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >>>>>> >>>>>> 0.217823 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >>>>>> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 03 00 03 54 5c b3-00 .C...T\.. >>>>>> >>>>>> 0.217891 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.218849 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.218941 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.219029 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.219103 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.220151 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.220278 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.220355 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.220430 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.220499 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.220579 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.220661 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.220735 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.221877 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.222024 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.222123 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.222286 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.223349 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.223482 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >>>>>> >>>>>> 0.223559 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.223648 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.223727 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.225102 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.225338 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 06 - . >>>>>> >>>>>> 0.225437 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.225529 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.225607 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >>>>>> 0.226624 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.226726 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.226812 sierra/sierra/library.c (2): Packet type 0x06 read. Returning GP_OK. >>>>>> 0.226885 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.226956 sierra/sierra/library.c (2): Transmission successful. >>>>>> 0.227025 sierra/sierra/sierra.c (2): *** folder support: yes >>>>>> 0.227104 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >>>>>> 0.227176 sierra/sierra/sierra.c (2): Closing connection >>>>>> 0.227242 sierra/sierra/sierra.c (2): ****************** sierra initialization OK >>>>>> 0.227311 sierra/sierra/sierra.c (2): Establishing connection >>>>>> 0.227387 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >>>>>> 0.227455 sierra/sierra/library.c (2): * sierra_capture >>>>>> 0.227529 sierra/sierra/library.c (2): sierra_get_int_register: register 0x33... >>>>>> 0.227597 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.227664 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.227747 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.227828 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.227898 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.240831 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.240981 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.241067 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >>>>>> 0.241117 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >>>>>> >>>>>> 0.241161 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >>>>>> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 02 00 01 33 34 00- .C...34. >>>>>> >>>>>> 0.241225 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.242484 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.242580 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.242668 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.242807 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.244060 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.244161 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.244241 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.244324 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.244380 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.244450 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.244521 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.244581 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.262205 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.262351 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.262451 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.262521 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.263788 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.263890 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >>>>>> >>>>>> 0.263964 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.264050 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >>>>>> >>>>>> 0.264123 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.265268 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.265405 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >>>>>> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 03 00 04 00 02 00 00 00-02 00 .......... >>>>>> >>>>>> 0.265483 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.265567 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.265640 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.266857 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.267008 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.267093 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.267175 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >>>>>> 0.267247 sierra/sierra/library.c (2): Value of register 0x33: 0x02. >>>>>> 0.267315 sierra/sierra/library.c (2): Writing acknowledgement... >>>>>> 0.267384 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.267455 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.267538 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.267618 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.267693 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.268730 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.268819 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.268903 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >>>>>> 0.268984 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.269088 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 06 - . >>>>>> >>>>>> 0.269314 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.270332 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.270428 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.270516 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.270591 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >>>>>> 0.271533 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.271635 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.271711 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >>>>>> 0.271785 sierra/sierra/library.c (2): Read value of register 0x33 and wrote acknowledgement. Returning. >>>>>> 0.271860 gp_port_get_timeout (2): Current port timeout is 5000 milliseconds. >>>>>> 0.271935 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds. >>>>>> 0.272008 sierra/sierra/library.c (2): sierra_sub_action: action 2, sub action 0 >>>>>> 0.272139 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >>>>>> 0.272244 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.272325 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.272405 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.272478 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >>>>>> 0.283930 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.284081 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >>>>>> 0.284164 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >>>>>> 0.284253 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >>>>>> >>>>>> 0.284359 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >>>>>> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 1b 43 03 00 02 02 00 04-00 .C....... >>>>>> >>>>>> 0.284439 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >>>>>> 0.285753 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.285848 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.285936 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.286014 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >>>>>> 0.287237 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.287389 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.287467 sierra/sierra/library.c (2): Reading packet... >>>>>> 0.287541 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >>>>>> 0.287605 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >>>>>> 0.287680 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.287750 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.287815 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >>>>>> 0.318747 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.318926 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >>>>>> 0.319027 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.319188 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >>>>>> 0.320669 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.320777 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >>>>>> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >>>>>> >>>>>> 0.320849 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >>>>>> 0.320935 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >>>>>> >>>>>> 0.321010 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >>>>>> 0.322196 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.322355 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >>>>>> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >>>>>> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >>>>>> 0040 11 - . >>>>>> >>>>>> 0.322433 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >>>>>> 0.322522 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >>>>>> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >>>>>> >>>>>> 0.322601 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >>>>>> 0.323692 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >>>>>> 0.323831 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >>>>>> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >>>>>> >>>>>> 0.323914 sierra/sierra/library.c (2): Packet type 0x11 read. Returning GP_OK. >>>>>> 0.323989 sierra/sierra/library.c (2): Packet successfully read. >>>>>> 0.324082 gp_context_error (0): Packet was rejected by camera. Please contact <[email protected]>. >>>>>> 0.324276 sierra (2): Operation failed in sierra_sub_action (-1)! >>>>>> 0.324354 sierra (2): Operation failed in sierra_capture (-1)! >>>>>> 0.324429 sierra/sierra/sierra.c (2): Operation failed in camera_capture (-1)! >>>>>> 0.324497 sierra/sierra/sierra.c (2): Closing connection >>>>>> 0.324581 gp_camera_capture [gphoto2-camera.c:1339](0): 'camera->functions->capture (camera, type, path, context)' failed: -1 >>>>>> 3.328387 gp_camera_free (2): Freeing camera... >>>>>> 3.328585 gp_camera_exit (2): Exiting camera ('Olympus C-2040Z')... >>>>>> 3.328670 sierra/sierra/sierra.c (2): sierra camera_exit >>>>>> 3.328745 gp_port_close (2): Closing port... >>>>>> 3.329073 gp_filesystem_reset (2): resetting filesystem >>>>>> 3.329260 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >>>>>> 3.329348 gp_filesystem_lru_clear (2): fscache LRU list already empty >>>>>> 3.329422 delete_all_folders (2): Internally deleting all folders from '/'... >>>>>> 3.329496 lookup_folder (2): Lookup folder '/'... >>>>>> 3.329568 lookup_folder (2): Found! / is 0x558d8dec6890 >>>>>> 3.329641 recurse_delete_folder (2): Recurse delete folder 0x558d8dec6890// >>>>>> 3.329713 delete_all_files (2): Delete all files in folder 0x558d8dec6890// >>>>>> 3.329783 gp_port_free (2): Freeing port... >>>>>> 3.329851 gp_port_close (2): Closing port... >>>>>> 3.330067 gp_filesystem_reset (2): resetting filesystem >>>>>> 3.330146 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >>>>>> 3.330215 gp_filesystem_lru_clear (2): fscache LRU list already empty >>>>>> 3.330284 delete_all_folders (2): Internally deleting all folders from '/'... >>>>>> 3.330352 lookup_folder (2): Lookup folder '/'... >>>>>> 3.330420 lookup_folder (2): Found! / is 0x558d8dec6890 >>>>>> 3.330490 recurse_delete_folder (2): Recurse delete folder 0x558d8dec6890// >>>>>> 3.330560 delete_all_files (2): Delete all files in folder 0x558d8dec6890// >>>> _______________________________________________ >>>> Gphoto-devel mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/gphoto-devel _______________________________________________ Gphoto-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gphoto-devel