Panasonic DMC-FZ30
Timothy Prestero <[email protected]>
| Newsgroups | gmane.comp.multimedia.gphoto.devel |
|---|---|
| Message-ID | <CA+AYvb0HjN9VEeTdNX9S8M-ZSZ24kc6u5t8iuNu6KMALppx=Fw@mail.gmail.com> |
Dear gphoto development team: This is an amazing piece of software, very happy to have successfully connected our old Nikon D5000 to a Raspberry Pi 4B running Octopi/Octoprint 1.7.0. I also tried our even more ancient Panasonic Lumix DMC-FZ30 with the camera USB mode set to PictBridge, but no success. As per the instructions from the gphoto support page (http://gphoto.org/proj/libgphoto2/support.php), I have attached all the relevant logfiles. Please let me know what else I can do to help. Thank you! TIM ~~~ Timothy PresteroDesign That Matters M: +1.617.697.9886 E: [email protected] A: 17725 NE 65th St #B-275, Redmond, WA 98052 USA W: www.designthatmatters.org V: http://bit.ly/DtMatTED _______________________________________________ Gphoto-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gphoto-devel
211014 Panasonic DMC-FZ30 my-logfile.txt
(text/plain, 31.8 KB)
0.000085 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
0.000225 main (2): gphoto2 2.5.20
0.000264 main (2): gphoto2 has been compiled with the following options:
0.000298 main (2): + gcc (C compiler used)
0.000330 main (2): + popt (mandatory, for handling command-line parameters)
0.000361 main (2): + exif (for displaying EXIF information)
0.000391 main (2): + cdk (for accessing configuration options)
0.000422 main (2): + aa (for displaying live previews)
0.000452 main (2): + jpeg (for displaying live previews in JPEG format)
0.000481 main (2): + readline (for easy navigation in the shell)
0.000512 main (2): libgphoto2 2.5.22
0.000545 main (2): libgphoto2 has been compiled with the following options:
0.000575 main (2): + all camlibs
0.000604 main (2): + gcc (C compiler used)
0.000634 main (2): + ltdl (for portable loading of camlibs)
0.000663 main (2): + EXIF (for special handling of EXIF files)
0.000694 main (2): libgphoto2_port 0.12.0
0.000727 main (2): libgphoto2_port has been compiled with the following options:
0.000757 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi
0.000787 main (2): + gcc (C compiler used)
0.000816 main (2): + ltdl (for portable loading of iolibs)
0.000846 main (2): + USB (libusb1, for USB cameras)
0.000876 main (2): + serial (for serial cameras)
0.000905 main (2): + no resmgr (serial port access and locking)
0.000934 main (2): + no ttylock (serial port locking)
0.000963 main (2): + no lockdev (serial port locking)
0.000994 main (2): CAMLIBS env var not set, using compile-time default instead
0.001023 main (2): IOLIBS env var not set, using compile-time default instead
0.001053 main (2): invoked with following arguments:
0.001083 main (2): --debug
0.001112 main (2): --debug-logfile=my-logfile.txt
0.001142 main (2): --capture-image
0.001232 load_settings (2): Creating gphoto config directory ('/home/pi/.gphoto')
0.001417 load_settings (2): Loading settings from file '/home/pi/.gphoto/settings'.
0.001584 main (2): The user has not specified both a model and a port. Try to figure them out.
0.001631 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0'...
0.002005 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/disk'.
0.002779 gp_port_library_list (2): found fstab fsname proc
0.002836 gp_port_library_list (2): found fstab fsname PARTUUID=2aef01ee-01
0.002915 gp_port_library_list (2): found fstab fsname PARTUUID=2aef01ee-02
0.003224 gp_port_library_list (2): found mtab fsname /dev/root
0.003290 gp_port_library_list (2): found mtab fsname devtmpfs
0.003339 gp_port_library_list (2): found mtab fsname sysfs
0.003383 gp_port_library_list (2): found mtab fsname proc
0.003427 gp_port_library_list (2): found mtab fsname securityfs
0.003473 gp_port_library_list (2): found mtab fsname tmpfs
0.003564 gp_port_library_list (2): found mtab fsname devpts
0.003608 gp_port_library_list (2): found mtab fsname tmpfs
0.003692 gp_port_library_list (2): found mtab fsname tmpfs
0.003779 gp_port_library_list (2): found mtab fsname tmpfs
0.003880 gp_port_library_list (2): found mtab fsname cgroup2
0.003976 gp_port_library_list (2): found mtab fsname cgroup
0.004017 gp_port_library_list (2): found mtab fsname none
0.004091 gp_port_library_list (2): found mtab fsname cgroup
0.004134 gp_port_library_list (2): found mtab fsname cgroup
0.004287 gp_port_library_list (2): found mtab fsname cgroup
0.004329 gp_port_library_list (2): found mtab fsname cgroup
0.004369 gp_port_library_list (2): found mtab fsname cgroup
0.004408 gp_port_library_list (2): found mtab fsname cgroup
0.004448 gp_port_library_list (2): found mtab fsname cgroup
0.004487 gp_port_library_list (2): found mtab fsname cgroup
0.004527 gp_port_library_list (2): found mtab fsname systemd-1
0.004569 gp_port_library_list (2): found mtab fsname sunrpc
0.004660 gp_port_library_list (2): found mtab fsname debugfs
0.004737 gp_port_library_list (2): found mtab fsname mqueue
0.004779 gp_port_library_list (2): found mtab fsname configfs
0.004881 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1
0.004954 gp_port_library_list (2): found mtab fsname tmpfs
0.005189 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/disk'.
0.005230 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/ptpip'.
0.005804 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/ptpip'.
0.005851 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/ptpip'.
0.005884 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/serial'.
0.007082 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/serial'.
0.007126 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/serial'.
0.007160 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usb1'.
0.038763 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usb1'.
0.038846 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,007') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usb1'.
0.038883 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usb1'.
0.038919 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usbdiskdirect'.
0.039773 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usbscsi'.
0.040618 gp_port_info_list_count (2): Counting entries (8 available)...
0.040661 gp_port_info_list_count (2): 4 regular entries available.
0.040752 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22'...
0.041865 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/adc65'.
0.041909 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/agfa_cl20'.
0.041943 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/aox'.
0.041974 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ax203'.
0.042006 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/barbie'.
0.042037 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/canon'.
0.042068 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/casio_qv'.
0.042100 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/clicksmart310'.
0.042131 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/digigr8'.
0.042216 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/digita'.
0.042250 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/dimagev'.
0.042284 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/dimera3500'.
0.042317 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/directory'.
0.042349 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/enigma13'.
0.042381 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/fuji'.
0.042414 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/gsmart300'.
0.042446 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/hp215'.
0.042478 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/iclick'.
0.042511 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/jamcam'.
0.042543 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/jd11'.
0.042574 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/jl2005a'.
0.042606 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/jl2005c'.
0.042638 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_dc120'.
0.042670 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_dc210'.
0.042703 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_dc240'.
0.042735 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_dc3200'.
0.042767 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_ez200'.
0.042798 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/konica'.
0.042830 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/konica_qm150'.
0.042862 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/largan'.
0.042894 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/lg_gsm'.
0.042926 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/mars'.
0.042957 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/mustek'.
0.042989 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/panasonic_coolshot'.
0.043021 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/panasonic_dc1000'.
0.043052 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/panasonic_dc1580'.
0.043083 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/panasonic_l859'.
0.043113 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/pccam300'.
0.043145 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/pccam600'.
0.043177 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/pentax'.
0.043209 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/polaroid_pdc320'.
0.043240 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/polaroid_pdc640'.
0.043272 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/polaroid_pdc700'.
0.043304 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ptp2'.
0.043336 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ricoh'.
0.043367 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ricoh_g3'.
0.043398 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/samsung'.
0.043473 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sierra'.
0.043507 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sipix_blink2'.
0.043539 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sipix_web2'.
0.043571 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/smal'.
0.043601 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sonix'.
0.043633 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sony_dscf1'.
0.043665 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sony_dscf55'.
0.043697 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/soundvision'.
0.043728 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/spca50x'.
0.043760 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sq905'.
0.043791 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/st2205'.
0.043823 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/stv0674'.
0.043854 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/stv0680'.
0.043886 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sx330z'.
0.043917 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/topfield'.
0.043949 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/toshiba_pdrm11'.
0.043981 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/tp6801'.
0.044022 gp_abilities_list_load_dir (2): Found 64 camera drivers.
0.144988 gp_port_info_list_count (2): Counting entries (8 available)...
0.145061 gp_port_info_list_count (2): 4 regular entries available.
0.145074 gp_port_new (2): Creating new device...
0.145098 gp_port_info_list_get_info (2): Getting info of entry 0 (8 available)...
0.145489 gp_port_set_settings (2): Setting settings...
0.145511 gp_port_info_list_get_info (2): Getting info of entry 1 (8 available)...
0.145808 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.145826 gp_port_set_settings (2): Setting settings...
0.145840 gp_port_info_list_get_info (2): Getting info of entry 2 (8 available)...
0.158246 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.158285 gp_port_set_settings (2): Setting settings...
0.158304 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,007, (new int=0, conf=-1, alt=-1) port usb:001,007
0.158317 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.158332 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.160577 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.161101 gp_libusb1_find_device_lib (2): Looking for USB device (vendor 0x4da, product 0x2374)... found.
0.161242 gp_libusb1_find_device_lib (2): Detected defaults: config 1, interface 0, altsetting 0, inep 82, outep 01, intep 83, class 06, subclass 01
0.161260 gp_abilities_list_detect_usb(2): Found 'Panasonic DMC-FS62' (0x4da,0x2374)
0.161303 gp_port_info_list_get_info (2): Getting info of entry 3 (8 available)...
0.173891 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.173930 gp_port_set_settings (2): Setting settings...
0.173949 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003
0.173962 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.173976 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.176253 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.177946 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)...
0.178136 gp_port_free (2): Freeing port...
0.178151 gp_port_close (2): Closing port...
0.178711 gp_camera_set_abilities (2): Setting abilities ('Panasonic DMC-FS62')...
0.178743 gp_setting_set (2): Setting key 'model' to value 'Panasonic DMC-FS62' (gphoto2)
0.178759 save_settings (2): Saving 3 setting(s) to file "/home/pi/.gphoto/settings"
0.179071 gp_port_info_list_lookup_path(2): Looking for path 'usb:001,007' (8 entries available)...
0.179091 gp_port_info_list_get_info (2): Getting info of entry 2 (8 available)...
0.179106 gp_camera_set_port_info (2): Setting port info for port 'Universal Serial Bus' at 'usb:001,007'...
0.191387 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.191423 gp_port_set_settings (2): Setting settings...
0.191441 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,007, (new int=0, conf=-1, alt=-1) port usb:001,007
0.191454 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.191469 gp_setting_set (2): Setting key 'port' to value 'usb:001,007' (gphoto2)
0.191486 save_settings (2): Saving 3 setting(s) to file "/home/pi/.gphoto/settings"
0.191843 gp_camera_init (2): Initializing camera...
0.191896 gp_libusb1_find_device_lib (2): Looking for USB device (vendor 0x4da, product 0x2374)... found.
0.192029 gp_libusb1_find_device_lib (2): Detected defaults: config 1, interface 0, altsetting 0, inep 82, outep 01, intep 83, class 06, subclass 01
0.192045 gp_camera_init (2): Loading '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ptp2'...
0.196681 gp_port_open (2): Opening USB port...
0.196721 gp_libusb1_open (2): ()
0.196799 gp_libusb1_open (2): claiming interface 0
0.197073 camera_init (2): maxpacketsize 64
0.197114 gp_port_set_timeout (2): Setting port timeout to 8000 milliseconds.
0.197146 ptp (2): PTP: Opening session
0.197166 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open session) (0x1) request...
0.197181 gp_port_write (3): Writing 16 = 0x10 bytes to port...
0.197368 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................
0.197388 ptp_usb_getresp (2): Reading PTP_OC 0x1002 (Open session) response...
0.197404 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.198050 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-00 00 00 00 ....... ....
0.198072 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds.
0.198089 ptp_usb_sendreq (2): Sending PTP_OC 0x1001 (Get device info) request...
0.198102 gp_port_write (3): Writing 12 = 0xc bytes to port...
0.198200 gp_port_write (3): Wrote 12 = 0xc bytes to port: (hexdump of 12 bytes)
0000 0c 00 00 00 01 00 01 10-01 00 00 00 ............
0.198217 ptp_usb_getdata (2): Reading PTP_OC 0x1001 (Get device info) data...
0.198232 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.198985 gp_port_read (3): Read 123 = 0x7b out of 1024 bytes from port: (hexdump of 123 bytes)
0000 7b 00 00 00 02 00 01 10-01 00 00 00 64 00 00 00 {...........d...
0010 00 00 00 00 00 00 00 0d-00 00 00 01 10 02 10 03 ................
0020 10 04 10 05 10 06 10 07-10 08 10 09 10 0a 10 0c ................
0030 10 0d 10 1b 10 04 00 00-00 04 40 05 40 08 40 09 ..........@.@.@.
0040 40 00 00 00 00 00 00 00-00 06 00 00 00 01 30 02 @.............0.
0050 30 06 30 0d 30 01 38 0d-38 0b 4d 00 41 00 54 00 0.0.0.8.8.M.A.T.
0060 53 00 55 00 53 00 48 00-49 00 54 00 41 00 00 00 S.U.S.H.I.T.A...
0070 00 04 31 00 2e 00 30 00-00 00 00 ..1...0....
0.199033 ptp_usb_getresp (2): Reading PTP_OC 0x1001 (Get device info) response...
0.199047 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.199288 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-01 00 00 00 ....... ....
0.199331 print_debug_deviceinfo (2): Device info:
0.199346 print_debug_deviceinfo (2): Manufacturer: MATSUSHITA
0.199358 print_debug_deviceinfo (2): Model: (null)
0.199371 print_debug_deviceinfo (2): device version: 1.0
0.199383 print_debug_deviceinfo (2): serial number: '(null)'
0.199395 print_debug_deviceinfo (2): Vendor extension ID: 0x00000000
0.199408 print_debug_deviceinfo (2): Vendor extension version: 0
0.199420 print_debug_deviceinfo (2): Vendor extension description: (null)
0.199433 print_debug_deviceinfo (2): Functional Mode: 0x0000
0.199445 print_debug_deviceinfo (2): PTP Standard Version: 100
0.199457 print_debug_deviceinfo (2): Supported operations:
0.199471 print_debug_deviceinfo (2): 0x1001 (Get device info)
0.199485 print_debug_deviceinfo (2): 0x1002 (Open session)
0.199499 print_debug_deviceinfo (2): 0x1003 (Close session)
0.199512 print_debug_deviceinfo (2): 0x1004 (Get storage IDs)
0.199526 print_debug_deviceinfo (2): 0x1005 (Get storage info)
0.199539 print_debug_deviceinfo (2): 0x1006 (Get number of objects)
0.199553 print_debug_deviceinfo (2): 0x1007 (Get object handles)
0.199566 print_debug_deviceinfo (2): 0x1008 (Get object info)
0.199580 print_debug_deviceinfo (2): 0x1009 (Get object)
0.199594 print_debug_deviceinfo (2): 0x100a (Get thumbnail)
0.199607 print_debug_deviceinfo (2): 0x100c (Send object info)
0.199621 print_debug_deviceinfo (2): 0x100d (Send object)
0.199634 print_debug_deviceinfo (2): 0x101b (Get partial object)
0.199646 print_debug_deviceinfo (2): Events Supported:
0.199660 print_debug_deviceinfo (2): 0x4004 (StoreAdded)
0.199673 print_debug_deviceinfo (2): 0x4005 (StoreRemoved)
0.199687 print_debug_deviceinfo (2): 0x4008 (DeviceInfoChanged)
0.199701 print_debug_deviceinfo (2): 0x4009 (RequestObjectTransfer)
0.199713 print_debug_deviceinfo (2): Device Properties Supported:
0.199728 ptp_usb_sendreq (2): Sending PTP_OC 0x1004 (Get storage IDs) request...
0.199741 gp_port_write (3): Writing 12 = 0xc bytes to port...
0.199844 gp_port_write (3): Wrote 12 = 0xc bytes to port: (hexdump of 12 bytes)
0000 0c 00 00 00 01 00 04 10-02 00 00 00 ............
0.199861 ptp_usb_getdata (2): Reading PTP_OC 0x1004 (Get storage IDs) data...
0.199875 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.208814 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes from port: (hexdump of 20 bytes)
0000 14 00 00 00 02 00 04 10-02 00 00 00 01 00 00 00 ................
0010 01 00 01 00 - ....
0.208839 ptp_usb_getresp (2): Reading PTP_OC 0x1004 (Get storage IDs) response...
0.208853 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.209203 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-02 00 00 00 ....... ....
0.209219 ptp (2): (storage=0xffffffff, handle=0xffffffff)
0.209232 ptp (2): Listing ...
0.209249 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object handles) (0xffffffff,0x0,0xffffffff) request...
0.209263 gp_port_write (3): Writing 24 = 0x18 bytes to port...
0.209391 gp_port_write (3): Wrote 24 = 0x18 bytes to port: (hexdump of 24 bytes)
0000 18 00 00 00 01 00 07 10-03 00 00 00 ff ff ff ff ................
0010 00 00 00 00 ff ff ff ff- ........
0.209409 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object handles) data...
0.209423 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.215657 gp_port_read (3): Read 24 = 0x18 out of 1024 bytes from port: (hexdump of 24 bytes)
0000 18 00 00 00 02 00 07 10-03 00 00 00 02 00 00 00 ................
0010 00 00 00 81 00 00 00 41- .......A
0.215676 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object handles) response...
0.215689 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.216052 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-03 00 00 00 ....... ....
0.216069 ptp (2): adding new objectid 0x81000000 (nrofobs=0,j=0)
0.216084 ptp (2): adding new objectid 0x41000000 (nrofobs=1,j=1)
0.216101 ptp (2): (storage=0x00010001, handle=0xffffffff)
0.216113 ptp (2): Listing ...
0.216129 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object handles) (0x10001,0x0,0xffffffff) request...
0.216142 gp_port_write (3): Writing 24 = 0x18 bytes to port...
0.216259 gp_port_write (3): Wrote 24 = 0x18 bytes to port: (hexdump of 24 bytes)
0000 18 00 00 00 01 00 07 10-04 00 00 00 01 00 01 00 ................
0010 00 00 00 00 ff ff ff ff- ........
0.216275 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object handles) data...
0.216289 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.220455 gp_port_read (3): Read 24 = 0x18 out of 1024 bytes from port: (hexdump of 24 bytes)
0000 18 00 00 00 02 00 07 10-04 00 00 00 02 00 00 00 ................
0010 00 00 00 81 00 00 00 41- .......A
0.220478 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object handles) response...
0.220491 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.220861 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-04 00 00 00 ....... ....
0.220877 ptp (2): adding old objectid 0x81000000 (nrofobs=2,j=1)
0.220891 ptp (2): adding old objectid 0x41000000 (nrofobs=2,j=1)
0.220908 gp_context_error (0): Sorry, your camera does not support generic capture
0.220967 gp_camera_capture [gphoto2-camera.c:1340](0): 'camera->functions->capture (camera, type, path, context)' failed: -6
0.221878 gp_camera_free (2): Freeing camera...
0.221903 gp_camera_exit (2): Exiting camera ('Panasonic DMC-FS62')...
0.221918 gp_port_get_timeout (2): Current port timeout is 20000 milliseconds.
0.221931 gp_port_set_timeout (2): Setting port timeout to 150 milliseconds.
0.221944 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
0.372147 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
0.522372 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds.
0.522417 ptp_usb_sendreq (2): Sending PTP_OC 0x1003 (Close session) request...
0.522431 gp_port_write (3): Writing 12 = 0xc bytes to port...
0.522563 gp_port_write (3): Wrote 12 = 0xc bytes to port: (hexdump of 12 bytes)
0000 0c 00 00 00 01 00 03 10-05 00 00 00 ............
0.522581 ptp_usb_getresp (2): Reading PTP_OC 0x1003 (Close session) response...
0.522596 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.523318 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-05 00 00 00 ....... ....
0.523373 gp_port_close (2): Closing port...
0.524460 _close_async_interrupts (2): canceling transfer 0:0x1931828 (status 0)
0.524655 _close_async_interrupts (2): canceling transfer 1:0x191ad58 (status 0)
0.524768 _close_async_interrupts (2): canceling transfer 2:0x19168f0 (status 0)
0.525038 _close_async_interrupts (2): canceling transfer 3:0x192f530 (status 0)
0.525135 _close_async_interrupts (2): canceling transfer 4:0x192f100 (status 0)
0.525398 _close_async_interrupts (2): canceling transfer 5:0x1919358 (status 0)
0.525494 _close_async_interrupts (2): canceling transfer 6:0x192cbc8 (status 0)
0.525766 _close_async_interrupts (2): canceling transfer 7:0x192e820 (status 0)
0.525879 _close_async_interrupts (2): canceling transfer 8:0x1913928 (status 0)
0.526144 _close_async_interrupts (2): canceling transfer 9:0x1937400 (status 0)
0.526249 _cb_irq (2): 0x1931828 with status 3
0.526265 _cb_irq (2): Transfer 0x1931828 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.526283 _cb_irq (2): 0x191ad58 with status 3
0.526296 _cb_irq (2): Transfer 0x191ad58 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.526313 _cb_irq (2): 0x19168f0 with status 3
0.526327 _cb_irq (2): Transfer 0x19168f0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.526344 _cb_irq (2): 0x192f530 with status 3
0.526357 _cb_irq (2): Transfer 0x192f530 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.526374 _cb_irq (2): 0x192f100 with status 3
0.526387 _cb_irq (2): Transfer 0x192f100 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.526403 _cb_irq (2): 0x1919358 with status 3
0.526416 _cb_irq (2): Transfer 0x1919358 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.526432 _cb_irq (2): 0x192cbc8 with status 3
0.526445 _cb_irq (2): Transfer 0x192cbc8 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.526461 _cb_irq (2): 0x192e820 with status 3
0.526474 _cb_irq (2): Transfer 0x192e820 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.526490 _cb_irq (2): 0x1913928 with status 3
0.526503 _cb_irq (2): Transfer 0x1913928 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.526519 _cb_irq (2): 0x1937400 with status 3
0.526532 _cb_irq (2): Transfer 0x1937400 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.527210 gp_filesystem_reset (2): resetting filesystem
0.527230 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
0.527242 gp_filesystem_lru_clear (2): fscache LRU list already empty
0.527255 delete_all_folders (2): Internally deleting all folders from '/'...
0.527268 lookup_folder (2): Lookup folder '/'...
0.527281 lookup_folder (2): Found! / is 0x1912440
0.527294 recurse_delete_folder (2): Recurse delete folder 0x1912440//
0.527306 gp_port_free (2): Freeing port...
0.527318 gp_port_close (2): Closing port...
0.527722 gp_filesystem_reset (2): resetting filesystem
0.527748 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
0.527760 gp_filesystem_lru_clear (2): fscache LRU list already empty
0.527772 delete_all_folders (2): Internally deleting all folders from '/'...
0.527785 lookup_folder (2): Lookup folder '/'...
0.527797 lookup_folder (2): Found! / is 0x1912440
0.527810 recurse_delete_folder (2): Recurse delete folder 0x1912440//
211014 Panasonic DMC-FZ30.txt
(text/plain, 3 KB)
Panasonic DMC-FZ30
text notes from Thu 14 Oct 2021
CAMERA SETUP
-- USB mode set to "Pictbridge".
~~~
1. OUTPUT FROM lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 04da:2374 Panasonic (Matsushita) Lumix Camera (PTP mode)
Bus 001 Device 004: ID 2c99:0002
Bus 001 Device 003: ID 046d:08ce Logitech, Inc. QuickCam Pro 5000
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
~~~
2. OUTPUT FROM gphoto2 --auto-detect
Model Port
----------------------------------------------------------
Panasonic DMC-FS62 usb:001,007
~~~
3. OUTPUT FROM LANG=C gphoto2 --summary >summary.txt
Camera summary:
Manufacturer: MATSUSHITA
Model: (null)
Version: 1.0
Capture Formats:
Display Formats: Association/Directory, Script, DPOF, Apple Quicktime, JPEG, TIFF
Device Capabilities:
File Download, No File Deletion, File Upload
No Image Capture, No Open Capture, No vendor specific capture
Storage Devices Summary:
store_00010001:
StorageDescription: None
VolumeLabel: None
Storage Type: Removable RAM (memory card)
Filesystemtype: Digital Camera Layout (DCIM)
Access Capability: Read-Write
Maximum Capability: 1015676928 (968 MB)
Free Space (Bytes): 719159296 (685 MB)
Free Space (Images): 0
Device Property Summary:
~~~
4. OUTPUT FROM LANG=C gphoto2 --list-all-config >config.txt
/main/actions/opcode
Label: PTP Opcode
Readonly: 0
Type: TEXT
Current: 0x1001,0xparam1,0xparam2
END
/main/status/serialnumber
Label: Serial Number
Readonly: 0
Type: TEXT
Current: None
END
/main/status/manufacturer
Label: Camera Manufacturer
Readonly: 0
Type: TEXT
Current: MATSUSHITA
END
/main/status/cameramodel
Label: Camera Model
Readonly: 0
Type: TEXT
Current: None
END
/main/status/deviceversion
Label: Device Version
Readonly: 0
Type: TEXT
Current: 1.0
END
/main/status/vendorextension
Label: Vendor Extension
Readonly: 0
Type: TEXT
Current: None
END
~~~
5. OUTPUT FROM gphoto2 --capture-image
*** Error ***
Sorry, your camera does not support generic capture
ERROR: Could not capture image.
ERROR: Could not capture.
*** Error (-6: 'Unsupported operation') ***
For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <[email protected]>, please run
gphoto2 as follows:
env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
Please make sure there is sufficient quoting around the arguments.
~~~
6. OUTPUT FROM env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
*** Error ***
Sorry, your camera does not support generic capture
ERROR: Could not capture image.
ERROR: Could not capture.
*** Error (-6: 'Unsupported operation') ***