Fwd: gPhoto add Olympus E-500
Dominique Hägele <[email protected]>
| Newsgroups | gmane.comp.multimedia.gphoto.devel |
|---|---|
| Message-ID | <CAL0g9EydAz0p3DEXUn+QAOyAGF2vctLqG0o3jSBNBmuTktnqFg@mail.gmail.com> |
---------- Forwarded message --------- Von: Dominique Hägele <[email protected]> Date: Fr., 21. Jan. 2022 um 17:51 Uhr Subject: Re: [gphoto-devel] gPhoto add Olympus E-500 To: Marcus Meissner <[email protected]> Here you go, if you need additional help let me know. Thank you for your help! Am Fr., 21. Jan. 2022 um 13:48 Uhr schrieb Marcus Meissner < [email protected]>: > Hi, > > Run > gphoto2 --summary --debug --debug-logfile=summary.log > > > and mail me summary.log > > Ciao, Marcus > On Fri, Jan 21, 2022 at 12:18:22PM +0100, Dominique Hägele wrote: > > Hello Marcus, > > > > Sure. can you Guide me what debug logs you need? > > > > BR > > Dominique > > > > Marcus Meissner <[email protected]> schrieb am Fr., 21. Jan. 2022, > > 11:38: > > > > > Hi, > > > > > > On Thu, Jan 20, 2022 at 06:08:55PM +0100, Dominique Hägele wrote: > > > > Hello, > > > > > > > > if I connect my Olympus E-500 via USB to my raspberrypi i have to > choose > > > > between storage and control: > > > > > > > > *Control mode: * > > > > > > > > pi@raspberrypi4:~ $ lsusb > > > > Bus 001 Device 003: ID 07b4:0110 Olympus Optical Co., Ltd > > > > pi@raspberrypi4:~ $ gphoto2 --auto-detect > > > > Modell Port > > > > ---------------------------------------------------------- > > > > Olympus E series (Control) usb:001,003 > > > > > > > > However, the last three commands just run into a timeout: > > > > > > > > LANG=C gphoto2 --summary >summary.txt > > > > LANG=C gphoto2 --list-all-config >config.txt > > > > gphoto2 --capture-image > > > > > > It would be good to see the debug logs of those. Perhaps something > stands > > > out. > > > > > > (The olympus driver for this mode is very hacky, it embeds PTP within > > > PictBridge... :( ) > > > > > > Ciao, Marcus > > > > _______________________________________________ Gphoto-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gphoto-devel
summary.log
(application/octet-stream, 82.2 KB)
0.002072 main (2): BITTE IMMER FOLGENDE ZEILE EINFÜGEN WENN DEBUG MESSAGES AN DIE MAILINGLISTE GESCHICKT WERDEN:
0.002211 main (2): gphoto2 2.5.20
0.002262 main (2): gphoto2 wurde mit den folgenden Optionen übersetzt:
0.002297 main (2): + gcc (C compiler used)
0.002328 main (2): + popt (mandatory, for handling command-line parameters)
0.002358 main (2): + exif (for displaying EXIF information)
0.002387 main (2): + cdk (for accessing configuration options)
0.002417 main (2): + aa (for displaying live previews)
0.002446 main (2): + jpeg (for displaying live previews in JPEG format)
0.002476 main (2): + readline (for easy navigation in the shell)
0.002507 main (2): libgphoto2 2.5.22
0.002539 main (2): libgphoto2 wurde mit den folgenden Optionen übersetzt:
0.002570 main (2): + all camlibs
0.002599 main (2): + gcc (C compiler used)
0.002628 main (2): + ltdl (for portable loading of camlibs)
0.002658 main (2): + EXIF (for special handling of EXIF files)
0.002688 main (2): libgphoto2_port 0.12.0
0.002720 main (2): libgphoto2_port wurde mit den folgenden Optionen übersetzt:
0.002750 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi
0.002779 main (2): + gcc (C compiler used)
0.002808 main (2): + ltdl (for portable loading of iolibs)
0.002838 main (2): + USB (libusb1, for USB cameras)
0.002867 main (2): + serial (for serial cameras)
0.002896 main (2): + no resmgr (serial port access and locking)
0.002925 main (2): + no ttylock (serial port locking)
0.002954 main (2): + no lockdev (serial port locking)
0.002984 main (2): CAMLIBS env var not set, using compile-time default instead
0.003014 main (2): IOLIBS env var not set, using compile-time default instead
0.003043 main (2): invoked with following arguments:
0.003074 main (2): --summary
0.003103 main (2): --debug
0.003132 main (2): --debug-logfile=summary.log
0.003224 load_settings (2): Creating gphoto config directory ('/home/pi/.gphoto')
0.004808 load_settings (2): Loading settings from file '/home/pi/.gphoto/settings'.
0.005540 main (2): The user has not specified both a model and a port. Try to figure them out.
0.005586 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0'...
0.006992 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/disk'.
0.009183 gp_port_library_list (2): found fstab fsname proc
0.009247 gp_port_library_list (2): found fstab fsname PARTUUID=0dd18581-01
0.009491 gp_port_library_list (2): found fstab fsname PARTUUID=0dd18581-02
0.010408 gp_port_library_list (2): found mtab fsname /dev/root
0.010480 gp_port_library_list (2): found mtab fsname devtmpfs
0.010529 gp_port_library_list (2): found mtab fsname sysfs
0.010573 gp_port_library_list (2): found mtab fsname proc
0.010617 gp_port_library_list (2): found mtab fsname securityfs
0.010663 gp_port_library_list (2): found mtab fsname tmpfs
0.010754 gp_port_library_list (2): found mtab fsname devpts
0.010798 gp_port_library_list (2): found mtab fsname tmpfs
0.010882 gp_port_library_list (2): found mtab fsname tmpfs
0.011068 gp_port_library_list (2): found mtab fsname tmpfs
0.011186 gp_port_library_list (2): found mtab fsname cgroup2
0.011282 gp_port_library_list (2): found mtab fsname cgroup
0.011324 gp_port_library_list (2): found mtab fsname none
0.011399 gp_port_library_list (2): found mtab fsname cgroup
0.011441 gp_port_library_list (2): found mtab fsname cgroup
0.011602 gp_port_library_list (2): found mtab fsname cgroup
0.011645 gp_port_library_list (2): found mtab fsname cgroup
0.011685 gp_port_library_list (2): found mtab fsname cgroup
0.011725 gp_port_library_list (2): found mtab fsname cgroup
0.011765 gp_port_library_list (2): found mtab fsname cgroup
0.011804 gp_port_library_list (2): found mtab fsname cgroup
0.011845 gp_port_library_list (2): found mtab fsname systemd-1
0.011887 gp_port_library_list (2): found mtab fsname debugfs
0.011964 gp_port_library_list (2): found mtab fsname mqueue
0.012005 gp_port_library_list (2): found mtab fsname sunrpc
0.012094 gp_port_library_list (2): found mtab fsname configfs
0.012197 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1
0.012272 gp_port_library_list (2): found mtab fsname tmpfs
0.012400 gp_port_library_list (2): found mtab fsname gvfsd-fuse
0.012445 gp_port_library_list (2): found mtab fsname fusectl
0.012486 gp_port_library_list (2): found mtab fsname /dev/sda1
0.012968 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/disk'.
0.013015 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/ptpip'.
0.015231 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/ptpip'.
0.015285 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/ptpip'.
0.015319 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/serial'.
0.017984 foreach_func (2): Loaded 'Serieller Port 0' ('serial:/dev/ttyS0') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/serial'.
0.018040 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/serial'.
0.018075 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/serial'.
0.018110 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usb1'.
0.043332 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usb1'.
0.043375 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:002,002') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usb1'.
0.043391 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usb1'.
0.043405 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usbdiskdirect'.
0.046434 foreach_func (2): Loaded 'USB Mass Storage direkter IO' ('usbdiskdirect:/dev/sdb') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usbdiskdirect'.
0.046465 foreach_func (2): Loaded 'USB Mass Storage direkter IO' ('usbdiskdirect:/dev/sda') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usbdiskdirect'.
0.046479 foreach_func (2): Called for filename '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usbscsi'.
0.047739 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg0') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usbscsi'.
0.047767 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg1') from '/usr/lib/arm-linux-gnueabihf/libgphoto2_port/0.12.0/usbscsi'.
0.047799 gp_port_info_list_count (2): Counting entries (13 available)...
0.047813 gp_port_info_list_count (2): 9 regular entries available.
0.047874 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22'...
0.049190 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/adc65'.
0.049213 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/agfa_cl20'.
0.049226 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/aox'.
0.049239 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ax203'.
0.049251 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/barbie'.
0.049264 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/canon'.
0.049277 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/casio_qv'.
0.049290 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/clicksmart310'.
0.049303 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/digigr8'.
0.049316 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/digita'.
0.049329 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/dimagev'.
0.049342 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/dimera3500'.
0.049355 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/directory'.
0.049369 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/enigma13'.
0.049381 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/fuji'.
0.049394 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/gsmart300'.
0.049407 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/hp215'.
0.049420 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/iclick'.
0.049433 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/jamcam'.
0.049446 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/jd11'.
0.049458 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/jl2005a'.
0.049471 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/jl2005c'.
0.049484 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_dc120'.
0.049497 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_dc210'.
0.049510 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_dc240'.
0.049523 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_dc3200'.
0.049536 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/kodak_ez200'.
0.049549 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/konica'.
0.049562 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/konica_qm150'.
0.049575 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/largan'.
0.049587 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/lg_gsm'.
0.049600 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/mars'.
0.049613 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/mustek'.
0.049626 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/panasonic_coolshot'.
0.049638 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/panasonic_dc1000'.
0.049651 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/panasonic_dc1580'.
0.049663 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/panasonic_l859'.
0.049698 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/pccam300'.
0.049713 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/pccam600'.
0.049727 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/pentax'.
0.049741 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/polaroid_pdc320'.
0.049754 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/polaroid_pdc640'.
0.049768 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/polaroid_pdc700'.
0.049783 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ptp2'.
0.049796 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ricoh'.
0.049810 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ricoh_g3'.
0.049823 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/samsung'.
0.049837 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sierra'.
0.049851 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sipix_blink2'.
0.049865 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sipix_web2'.
0.049879 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/smal'.
0.049892 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sonix'.
0.049905 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sony_dscf1'.
0.049919 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sony_dscf55'.
0.049933 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/soundvision'.
0.049947 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/spca50x'.
0.049961 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sq905'.
0.049975 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/st2205'.
0.049988 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/stv0674'.
0.050002 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/stv0680'.
0.050016 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/sx330z'.
0.050030 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/topfield'.
0.050043 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/toshiba_pdrm11'.
0.050057 foreach_func (2): Found '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/tp6801'.
0.050076 gp_abilities_list_load_dir (2): Found 64 camera drivers.
0.220147 gp_port_info_list_count (2): Counting entries (13 available)...
0.220222 gp_port_info_list_count (2): 9 regular entries available.
0.220237 gp_port_new (2): Creating new device...
0.220262 gp_port_info_list_get_info (2): Getting info of entry 0 (13 available)...
0.220665 gp_port_set_settings (2): Setting settings...
0.220689 gp_port_info_list_get_info (2): Getting info of entry 1 (13 available)...
0.221048 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.221078 gp_port_set_settings (2): Setting settings...
0.221094 gp_port_info_list_get_info (2): Getting info of entry 2 (13 available)...
0.221368 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.221386 gp_port_set_settings (2): Setting settings...
0.221400 gp_port_info_list_get_info (2): Getting info of entry 3 (13 available)...
0.230589 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.230624 gp_port_set_settings (2): Setting settings...
0.230644 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:002,002, (new int=0, conf=-1, alt=-1) port usb:002,002
0.230686 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.230702 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.233078 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.234824 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)...
0.234951 gp_port_info_list_get_info (2): Getting info of entry 4 (13 available)...
0.244563 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.244604 gp_port_set_settings (2): Setting settings...
0.244622 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003
0.244636 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.244650 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.246934 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.247420 gp_libusb1_find_device_lib (2): Looking for USB device (vendor 0x7b4, product 0x110)... found.
0.247454 gp_libusb1_find_device_lib (2): USB device (vendor 0x7b4, product 0x110) is a mass storage device, and might not function with gphoto2. Reference: http://www.linux-usb.org/USB-guide/x498.html
0.247584 gp_libusb1_find_device_lib (2): Detected defaults: config 1, interface 0, altsetting 0, inep 82, outep 01, intep 83, class 08, subclass 06
0.247603 gp_abilities_list_detect_usb(2): Found 'Olympus E series (Control)' (0x7b4,0x110)
0.247646 gp_port_info_list_get_info (2): Getting info of entry 5 (13 available)...
0.248378 gp_port_set_settings (2): Setting settings...
0.248406 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.248606 gp_port_info_list_get_info (2): Getting info of entry 6 (13 available)...
0.248918 gp_port_set_settings (2): Setting settings...
0.248938 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.249117 gp_port_info_list_get_info (2): Getting info of entry 7 (13 available)...
0.249437 gp_port_set_settings (2): Setting settings...
0.249458 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.253489 gp_port_info_list_get_info (2): Getting info of entry 8 (13 available)...
0.253844 gp_port_set_settings (2): Setting settings...
0.253865 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.257909 gp_port_free (2): Freeing port...
0.257950 gp_port_close (2): Closing port...
0.258165 gp_camera_set_abilities (2): Setting abilities ('Olympus E series (Control)')...
0.258188 gp_setting_set (2): Setting key 'model' to value 'Olympus E series (Control)' (gphoto2)
0.258204 save_settings (2): Saving 2 setting(s) to file "/home/pi/.gphoto/settings"
0.258515 gp_port_info_list_lookup_path(2): Looking for path 'usb:001,003' (13 entries available)...
0.258535 gp_port_info_list_get_info (2): Getting info of entry 4 (13 available)...
0.258549 gp_camera_set_port_info (2): Setting port info for port 'Universal Serial Bus' at 'usb:001,003'...
0.267773 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.267810 gp_port_set_settings (2): Setting settings...
0.267828 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003
0.267841 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.267857 gp_setting_set (2): Setting key 'port' to value 'usb:001,003' (gphoto2)
0.267874 save_settings (2): Saving 2 setting(s) to file "/home/pi/.gphoto/settings"
0.268215 gp_camera_init (2): Initializing camera...
0.268283 gp_libusb1_find_device_lib (2): Looking for USB device (vendor 0x7b4, product 0x110)... found.
0.268332 gp_libusb1_find_device_lib (2): USB device (vendor 0x7b4, product 0x110) is a mass storage device, and might not function with gphoto2. Reference: http://www.linux-usb.org/USB-guide/x498.html
0.268454 gp_libusb1_find_device_lib (2): Detected defaults: config 1, interface 0, altsetting 0, inep 82, outep 01, intep 83, class 08, subclass 06
0.268470 gp_camera_init (2): Loading '/usr/lib/arm-linux-gnueabihf/libgphoto2/2.5.22/ptp2'...
0.273227 gp_port_open (2): Opening USB port...
0.273273 gp_libusb1_open (2): ()
0.273349 gp_libusb1_open (2): Device has a kernel driver attached (1), detaching it now.
0.461579 gp_libusb1_open (2): claiming interface 0
0.461859 camera_init (2): maxpacketsize 64
0.461933 camera_init (2): Entering Olympus USB Mass Storage XML Wrapped Mode.
0.465854 gp_port_set_timeout (2): Setting port timeout to 8000 milliseconds.
0.465913 ptp (2): PTP: Opening session
0.465945 ums_wrap2_sendreq (2): ums_wrap2_sendreq
0.465962 is_outer_operation (2): is_outer_operation 1002
0.465975 ums_wrap_sendreq (2): ums_wrap_sendreq
0.465989 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.466217 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 42 42 42 42-10 00 00 00 00 00 0c c0 USBCBBBB........
0010 00 00 00 00 00 00 00 00-10 00 00 00 00 00 00 ...............
0.466258 gp_port_write (3): Writing 16 = 0x10 bytes to port...
0.466362 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................
0.466377 usb_wrap_OK (2): usb_wrap_OK
0.466391 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.478277 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 42 42 42 42-00 00 00 00 00 USBSBBBB.....
0.478314 ums_wrap_sendreq (2): send_scsi_cmd ret 0
0.478329 is_outer_operation (2): is_outer_operation 1002
0.478342 ums_wrap_getresp (2): ums_wrap_getresp
0.478355 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.478483 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 43 42 42 42-40 00 00 00 80 00 0c c3 USBCCBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
0.478500 gp_port_read (3): Reading 64 = 0x40 bytes from port...
0.481572 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 0c 00 00 00 03 00 01 20-00 00 00 00 ef be ad de ....... ........
0010 ef be ad de ef be ad de-bc 51 16 b0 bc 51 16 b0 .........Q...Q..
0020 9c f5 00 b0 18 75 11 40-c8 51 16 b0 00 00 00 00 [email protected]......
0030 62 82 00 00 c7 76 11 40-62 82 00 00 27 00 00 00 b....v.@b...'...
0.481609 usb_wrap_OK (2): usb_wrap_OK
0.481622 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.482225 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 43 42 42 42-00 00 00 00 00 USBSCBBB.....
0.482241 ums_wrap_getresp (2): send_scsi_cmd ret 0
0.482255 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds.
0.482268 camera_init (2): Sending empty XDISCVRY.X3C file to camera ...
0.482291 ums_wrap2_sendreq (2): ums_wrap2_sendreq
0.482304 is_outer_operation (2): is_outer_operation 100c
0.482316 ums_wrap_sendreq (2): ums_wrap_sendreq
0.482329 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.482437 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 44 42 42 42-14 00 00 00 00 00 0c c0 USBCDBBB........
0010 00 00 00 00 00 00 00 00-14 00 00 00 00 00 00 ...............
0.482481 gp_port_write (3): Writing 20 = 0x14 bytes to port...
0.482580 gp_port_write (3): Wrote 20 = 0x14 bytes to port: (hexdump of 20 bytes)
0000 14 00 00 00 01 00 0c 10-01 00 00 00 01 00 00 80 ................
0010 00 00 00 00 - ....
0.482594 usb_wrap_OK (2): usb_wrap_OK
0.482607 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.499702 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 44 42 42 42-00 00 00 00 00 USBSDBBB.....
0.499731 ums_wrap_sendreq (2): send_scsi_cmd ret 0
0.499744 is_outer_operation (2): is_outer_operation 100c
0.499756 ums_wrap_senddata (2): ums_wrap_senddata
0.499771 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.499882 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 45 42 42 42-5e 00 00 00 00 00 0c c1 USBCEBBB^.......
0010 00 00 00 00 00 00 00 00-5e 00 00 00 00 00 00 ........^......
0.499897 gp_port_write (3): Writing 94 = 0x5e bytes to port...
0.501497 gp_port_write (3): Wrote 94 = 0x5e bytes to port: (hexdump of 94 bytes)
0000 5e 00 00 00 02 00 0c 10-01 00 00 00 01 00 00 80 ^...............
0010 02 30 00 00 00 00 00 00-00 00 00 00 00 00 00 00 .0..............
0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0040 0d 58 00 44 00 49 00 53-00 43 00 56 00 52 00 59 .X.D.I.S.C.V.R.Y
0050 00 2e 00 58 00 33 00 43-00 00 00 00 00 00 ...X.3.C......
0.501517 usb_wrap_OK (2): usb_wrap_OK
0.501530 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.534810 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 45 42 42 42-00 00 00 00 00 USBSEBBB.....
0.534832 ums_wrap_senddata (2): send_scsi_cmd ret 0
0.534845 is_outer_operation (2): is_outer_operation 100c
0.534857 ums_wrap_getresp (2): ums_wrap_getresp
0.534870 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.534980 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 46 42 42 42-40 00 00 00 80 00 0c c3 USBCFBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
0.534995 gp_port_read (3): Reading 64 = 0x40 bytes from port...
0.538622 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 18 00 00 00 03 00 01 20-01 00 00 00 01 00 00 80 ....... ........
0010 ff ff ff ff 04 00 00 00-ef be ad de ef be ad de ................
0020 ef be ad de ef be ad de-ef be ad de ef be ad de ................
0030 ef be ad de ef be ad de-ef be ad de ef be ad de ................
0.538636 usb_wrap_OK (2): usb_wrap_OK
0.538649 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.539242 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 46 42 42 42-00 00 00 00 00 USBSFBBB.....
0.539256 ums_wrap_getresp (2): send_scsi_cmd ret 0
0.539270 camera_init (2): olympus getcameraid
0.539284 ums_wrap2_sendreq (2): ums_wrap2_sendreq
0.539297 is_outer_operation (2): is_outer_operation 9581
0.539309 is_outer_operation (2): is_outer_operation 9581
0.539321 ums_wrap2_getdata (2): ums_wrap2_getdata
0.539604 generate_xml (2): generated xml is:
0.539621 generate_xml (2): <?xml version="1.0"?>
<x3c xmlns="http://www1.olympus-imaging.com/ww/x3c"><input><c9581/></input></x3c>
0.539634 olympus_xml_transfer (2): olympus_xml_transfer
0.539646 olympus_xml_transfer (2): ... checking camera for events ...
0.543141 gp_port_get_timeout (2): Current port timeout is 20000 milliseconds.
0.543188 gp_port_set_timeout (2): Setting port timeout to 150 milliseconds.
0.543203 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
0.693393 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
0.843613 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds.
0.843686 olympus_xml_transfer (2): ... sending XML request to camera ...
0.843724 ums_wrap_sendreq (2): ums_wrap_sendreq
0.843746 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.843923 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 47 42 42 42-10 00 00 00 00 00 0c c0 USBCGBBB........
0010 00 00 00 00 00 00 00 00-10 00 00 00 00 00 00 ...............
0.843949 gp_port_write (3): Writing 16 = 0x10 bytes to port...
0.844086 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 0c 10-00 00 00 00 01 00 00 80 ................
0.844111 usb_wrap_OK (2): usb_wrap_OK
0.844132 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.858243 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 47 42 42 42-00 00 00 00 00 USBSGBBB.....
0.858267 ums_wrap_sendreq (2): send_scsi_cmd ret 0
0.858287 ums_wrap_senddata (2): ums_wrap_senddata
0.858311 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.858460 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 48 42 42 42-5e 00 00 00 00 00 0c c1 USBCHBBB^.......
0010 00 00 00 00 00 00 00 00-5e 00 00 00 00 00 00 ........^......
0.858485 gp_port_write (3): Writing 94 = 0x5e bytes to port...
0.860032 gp_port_write (3): Wrote 94 = 0x5e bytes to port: (hexdump of 94 bytes)
0000 5e 00 00 00 02 00 0c 10-00 00 00 00 01 00 00 80 ^...............
0010 02 30 00 00 68 00 00 00-00 00 00 00 00 00 00 00 .0..h...........
0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0040 0d 48 00 52 00 45 00 51-00 55 00 45 00 53 00 54 .H.R.E.Q.U.E.S.T
0050 00 2e 00 58 00 33 00 43-00 00 00 00 00 00 ...X.3.C......
0.860056 usb_wrap_OK (2): usb_wrap_OK
0.860078 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.872717 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 48 42 42 42-00 00 00 00 00 USBSHBBB.....
0.872750 ums_wrap_senddata (2): send_scsi_cmd ret 0
0.872770 ums_wrap_getresp (2): ums_wrap_getresp
0.872791 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.872942 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 49 42 42 42-40 00 00 00 80 00 0c c3 USBCIBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
0.872967 gp_port_read (3): Reading 64 = 0x40 bytes from port...
0.875768 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 18 00 00 00 03 00 01 20-00 00 00 00 01 00 00 80 ....... ........
0010 ff ff ff ff 05 00 00 00-ef be ad de ef be ad de ................
0020 ef be ad de ef be ad de-ef be ad de ef be ad de ................
0030 ef be ad de ef be ad de-ef be ad de ef be ad de ................
0.875806 usb_wrap_OK (2): usb_wrap_OK
0.875838 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.876362 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 49 42 42 42-00 00 00 00 00 USBSIBBB.....
0.876398 ums_wrap_getresp (2): send_scsi_cmd ret 0
0.876433 ums_wrap_sendreq (2): ums_wrap_sendreq
0.876513 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.876719 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 4a 42 42 42-0c 00 00 00 00 00 0c c0 USBCJBBB........
0010 00 00 00 00 00 00 00 00-0c 00 00 00 00 00 00 ...............
0.876757 gp_port_write (3): Writing 12 = 0xc bytes to port...
0.876942 gp_port_write (3): Wrote 12 = 0xc bytes to port: (hexdump of 12 bytes)
0000 0c 00 00 00 01 00 0d 10-01 00 00 00 ............
0.876978 usb_wrap_OK (2): usb_wrap_OK
0.877010 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.891096 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 4a 42 42 42-00 00 00 00 00 USBSJBBB.....
0.891144 ums_wrap_sendreq (2): send_scsi_cmd ret 0
0.891173 ums_wrap_senddata (2): ums_wrap_senddata
0.891209 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.891409 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 4b 42 42 42-74 00 00 00 00 00 0c c1 USBCKBBBt.......
0010 00 00 00 00 00 00 00 00-74 00 00 00 00 00 00 ........t......
0.891446 gp_port_write (3): Writing 116 = 0x74 bytes to port...
0.892961 gp_port_write (3): Wrote 116 = 0x74 bytes to port: (hexdump of 116 bytes)
0000 74 00 00 00 02 00 0d 10-01 00 00 00 3c 3f 78 6d t...........<?xm
0010 6c 20 76 65 72 73 69 6f-6e 3d 22 31 2e 30 22 3f l version="1.0"?
0020 3e 0a 3c 78 33 63 20 78-6d 6c 6e 73 3d 22 68 74 >.<x3c xmlns="ht
0030 74 70 3a 2f 2f 77 77 77-31 2e 6f 6c 79 6d 70 75 tp://www1.olympu
0040 73 2d 69 6d 61 67 69 6e-67 2e 63 6f 6d 2f 77 77 s-imaging.com/ww
0050 2f 78 33 63 22 3e 3c 69-6e 70 75 74 3e 3c 63 39 /x3c"><input><c9
0060 35 38 31 2f 3e 3c 2f 69-6e 70 75 74 3e 3c 2f 78 581/></input></x
0070 33 63 3e 0a - 3c>.
0.893000 usb_wrap_OK (2): usb_wrap_OK
0.893032 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.905426 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 4b 42 42 42-00 00 00 00 00 USBSKBBB.....
0.905473 ums_wrap_senddata (2): send_scsi_cmd ret 0
0.905503 ums_wrap_getresp (2): ums_wrap_getresp
0.905534 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.905734 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 4c 42 42 42-40 00 00 00 80 00 0c c3 USBCLBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
0.905771 gp_port_read (3): Reading 64 = 0x40 bytes from port...
0.908693 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 0c 00 00 00 03 00 01 20-01 00 00 00 d0 0f 16 b0 ....... ........
0010 e8 3a 01 b0 0c 00 00 00-ff ff ff ff 3c 3b 01 b0 .:..........<;..
0020 28 3b 01 b0 50 19 14 40-f8 3b 01 b0 10 00 00 00 (;..P..@.;......
0030 b0 3b 01 b0 00 58 08 b0-01 0f 00 00 00 ba 15 40 .;...X.........@
0.908738 usb_wrap_OK (2): usb_wrap_OK
0.908769 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.909356 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 4c 42 42 42-00 00 00 00 00 USBSLBBB.....
0.909392 ums_wrap_getresp (2): send_scsi_cmd ret 0
0.909422 olympus_xml_transfer (2): ... waiting for camera ...
0.909455 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
0.975050 _cb_irq (2): 0x15ea528 with status 0
0.975105 _cb_irq (3): interrupt (hexdump of 24 bytes)
0000 18 00 00 00 04 00 09 40-ff ff ff ff 03 00 00 00 .......@........
0010 00 00 00 00 00 00 00 00- ........
0.975139 _cb_irq (2): Requeuing completed transfer 0x15ea528
0.975260 gp_port_check_int (3): Read 24 = 0x18 bytes from interrupt endpoint: (hexdump of 24 bytes)
0000 18 00 00 00 04 00 09 40-ff ff ff ff 03 00 00 00 .......@........
0010 00 00 00 00 00 00 00 00- ........
0.975298 olympus_xml_transfer (2): event: code 4009, p 00000003
0.975329 ums_wrap_sendreq (2): ums_wrap_sendreq
0.975362 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.975580 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 4d 42 42 42-10 00 00 00 00 00 0c c0 USBCMBBB........
0010 00 00 00 00 00 00 00 00-10 00 00 00 00 00 00 ...............
0.975619 gp_port_write (3): Writing 16 = 0x10 bytes to port...
0.975811 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 08 10-02 00 00 00 03 00 00 00 ................
0.975847 usb_wrap_OK (2): usb_wrap_OK
0.975879 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.988787 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 4d 42 42 42-00 00 00 00 00 USBSMBBB.....
0.988833 ums_wrap_sendreq (2): send_scsi_cmd ret 0
0.988863 ums_wrap_getdata (2): ums_wrap_getdata
0.988894 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.989097 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 4e 42 42 42-40 00 00 00 80 00 0c c4 USBCNBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
0.989134 gp_port_read (3): Reading 64 = 0x40 bytes from port...
0.992360 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 10 00 00 00 02 00 01 20-02 00 00 00 5e 00 00 00 ....... ....^...
0010 a5 a5 a4 a5 a5 a5 a5 a5-a5 a5 a5 a5 a5 a4 a5 b5 ................
0020 a5 e5 a5 85 a5 b5 a5 a5-a5 85 a5 a5 a5 25 a1 a5 .............%..
0030 a5 a5 a4 a5 a5 a5 a5 a5-a5 b5 85 a5 a5 a7 a5 a5 ................
0.992407 usb_wrap_OK (2): usb_wrap_OK
0.992439 gp_port_read (3): Reading 13 = 0xd bytes from port...
0.993056 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 4e 42 42 42-00 00 00 00 00 USBSNBBB.....
0.993092 ums_wrap_getdata (2): send_scsi_cmd ret 0
0.993124 gp_port_write (3): Writing 31 = 0x1f bytes to port...
0.993320 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 4f 42 42 42-5e 00 00 00 80 00 0c c2 USBCOBBB^.......
0010 00 00 00 00 00 00 00 00-5e 00 00 00 00 00 00 ........^......
0.993357 gp_port_read (3): Reading 94 = 0x5e bytes from port...
1.006584 gp_port_read (3): Read 94 = 0x5e bytes from port: (hexdump of 94 bytes)
0000 5e 00 00 00 02 00 08 10-02 00 00 00 01 00 00 80 ^...............
0010 02 30 00 00 c8 00 00 00-00 00 00 00 00 00 00 00 .0..............
0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0040 0d 44 00 52 00 53 00 50-00 4f 00 4e 00 53 00 45 .D.R.S.P.O.N.S.E
0050 00 2e 00 58 00 33 00 43-00 00 00 00 00 00 ...X.3.C......
1.006678 usb_wrap_OK (2): usb_wrap_OK
1.006711 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.007272 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 4f 42 42 42-00 00 00 00 00 USBSOBBB.....
1.007313 ums_wrap_getdata (2): send_scsi_cmd 2 ret 0
1.007363 ums_wrap_getdata (3): ptp2/olympus/getdata (hexdump of 82 bytes)
0000 01 00 00 80 02 30 00 00-c8 00 00 00 00 00 00 00 .....0..........
0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0030 00 00 00 00 0d 44 00 52-00 53 00 50 00 4f 00 4e .....D.R.S.P.O.N
0040 00 53 00 45 00 2e 00 58-00 33 00 43 00 00 00 00 .S.E...X.3.C....
0050 00 00 - ..
1.007451 ums_wrap_getresp (2): ums_wrap_getresp
1.007485 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.007711 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 50 42 42 42-40 00 00 00 80 00 0c c3 USBCPBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
1.007753 gp_port_read (3): Reading 64 = 0x40 bytes from port...
1.012160 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 0c 00 00 00 03 00 01 20-02 00 00 00 0c 00 00 00 ....... ........
0010 ff ff ff ff 90 c2 01 21-c8 0c 00 00 00 00 01 21 .......!.......!
0020 00 00 00 00 18 3b 01 b0-18 3b 01 b0 30 3b 01 b0 .....;...;..0;..
0030 01 20 00 00 57 21 14 40-52 00 00 00 52 5c 08 b0 . [email protected]\..
1.012223 usb_wrap_OK (2): usb_wrap_OK
1.012256 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.012844 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 50 42 42 42-00 00 00 00 00 USBSPBBB.....
1.012889 ums_wrap_getresp (2): send_scsi_cmd ret 0
1.012931 olympus_xml_transfer (2): regular xml transfer: got new file: DRSPONSE.X3C
1.012968 ums_wrap_sendreq (2): ums_wrap_sendreq
1.013001 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.013219 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 51 42 42 42-10 00 00 00 00 00 0c c0 USBCQBBB........
0010 00 00 00 00 00 00 00 00-10 00 00 00 00 00 00 ...............
1.013259 gp_port_write (3): Writing 16 = 0x10 bytes to port...
1.013453 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 09 10-03 00 00 00 03 00 00 00 ................
1.013491 usb_wrap_OK (2): usb_wrap_OK
1.013523 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.029155 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 51 42 42 42-00 00 00 00 00 USBSQBBB.....
1.029226 ums_wrap_sendreq (2): send_scsi_cmd ret 0
1.029256 ums_wrap_getdata (2): ums_wrap_getdata
1.029289 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.029505 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 52 42 42 42-40 00 00 00 80 00 0c c4 USBCRBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
1.029545 gp_port_read (3): Reading 64 = 0x40 bytes from port...
1.033465 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 10 00 00 00 02 00 01 20-03 00 00 00 d4 00 00 00 ....... ........
0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0030 00 00 00 00 0d 48 00 52-00 45 00 51 00 55 00 45 .....H.R.E.Q.U.E
1.033523 usb_wrap_OK (2): usb_wrap_OK
1.033556 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.034088 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 52 42 42 42-00 00 00 00 00 USBSRBBB.....
1.034128 ums_wrap_getdata (2): send_scsi_cmd ret 0
1.034160 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.034361 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 53 42 42 42-d4 00 00 00 80 00 0c c2 USBCSBBB........
0010 00 00 00 00 00 00 00 00-d4 00 00 00 00 00 00 ...............
1.034452 gp_port_read (3): Reading 212 = 0xd4 bytes from port...
1.071406 gp_port_read (3): Read 212 = 0xd4 bytes from port: (hexdump of 212 bytes)
0000 d4 00 00 00 02 00 09 10-03 00 00 00 3c 3f 78 6d ............<?xm
0010 6c 20 76 65 72 73 69 6f-6e 3d 22 31 2e 30 22 3f l version="1.0"?
0020 3e 0a 3c 78 33 63 20 78-6d 6c 6e 73 3d 22 68 74 >.<x3c xmlns="ht
0030 74 70 3a 2f 2f 77 77 77-31 2e 6f 6c 79 6d 70 75 tp://www1.olympu
0040 73 2d 69 6d 61 67 69 6e-67 2e 63 6f 6d 2f 77 77 s-imaging.com/ww
0050 2f 78 33 63 22 3e 0a 3c-6f 75 74 70 75 74 3e 0a /x3c">.<output>.
0060 3c 72 65 73 75 6c 74 3e-32 30 30 31 3c 2f 72 65 <result>2001</re
0070 73 75 6c 74 3e 0a 3c 63-39 35 38 31 3e 0a 3c 64 sult>.<c9581>.<d
0080 61 74 61 3e 34 46 34 43-35 39 34 44 35 30 35 35 ata>4F4C594D5055
0090 35 33 32 30 34 34 34 39-34 37 34 39 35 34 34 31 5320444947495441
00a0 34 43 32 30 34 33 34 31-34 44 34 35 35 32 34 31 4C2043414D455241
00b0 30 30 3c 2f 64 61 74 61-3e 0a 3c 2f 63 39 35 38 00</data>.</c958
00c0 31 3e 0a 3c 2f 6f 75 74-70 75 74 3e 0a 3c 2f 78 1>.</output>.</x
00d0 33 63 3e 0a - 3c>.
1.071478 usb_wrap_OK (2): usb_wrap_OK
1.071510 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.072102 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 53 42 42 42-00 00 00 00 00 USBSSBBB.....
1.072140 ums_wrap_getdata (2): send_scsi_cmd 2 ret 0
1.072207 ums_wrap_getdata (3): ptp2/olympus/getdata (hexdump of 200 bytes)
0000 3c 3f 78 6d 6c 20 76 65-72 73 69 6f 6e 3d 22 31 <?xml version="1
0010 2e 30 22 3f 3e 0a 3c 78-33 63 20 78 6d 6c 6e 73 .0"?>.<x3c xmlns
0020 3d 22 68 74 74 70 3a 2f-2f 77 77 77 31 2e 6f 6c ="http://www1.ol
0030 79 6d 70 75 73 2d 69 6d-61 67 69 6e 67 2e 63 6f ympus-imaging.co
0040 6d 2f 77 77 2f 78 33 63-22 3e 0a 3c 6f 75 74 70 m/ww/x3c">.<outp
0050 75 74 3e 0a 3c 72 65 73-75 6c 74 3e 32 30 30 31 ut>.<result>2001
0060 3c 2f 72 65 73 75 6c 74-3e 0a 3c 63 39 35 38 31 </result>.<c9581
0070 3e 0a 3c 64 61 74 61 3e-34 46 34 43 35 39 34 44 >.<data>4F4C594D
0080 35 30 35 35 35 33 32 30-34 34 34 39 34 37 34 39 5055532044494749
0090 35 34 34 31 34 43 32 30-34 33 34 31 34 44 34 35 54414C2043414D45
00a0 35 32 34 31 30 30 3c 2f-64 61 74 61 3e 0a 3c 2f 524100</data>.</
00b0 63 39 35 38 31 3e 0a 3c-2f 6f 75 74 70 75 74 3e c9581>.</output>
00c0 0a 3c 2f 78 33 63 3e 0a- .</x3c>.
1.072248 ums_wrap_getresp (2): ums_wrap_getresp
1.072280 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.072483 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 54 42 42 42-40 00 00 00 80 00 0c c3 USBCTBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
1.072520 gp_port_read (3): Reading 64 = 0x40 bytes from port...
1.075390 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 0c 00 00 00 03 00 01 20-03 00 00 00 e0 0f 16 b0 ....... ........
0010 e8 3a 01 b0 0c 00 00 00-ff ff ff ff 3c 3b 01 b0 .:..........<;..
0020 20 3b 01 b0 50 19 14 40-e0 0f 16 b0 00 59 08 b0 ;[email protected]..
0030 b0 3b 01 b0 e0 3b 01 b0-01 0f 00 00 00 ba 15 40 .;...;.........@
1.075430 usb_wrap_OK (2): usb_wrap_OK
1.075462 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.075946 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 54 42 42 42-00 00 00 00 00 USBSTBBB.....
1.075983 ums_wrap_getresp (2): send_scsi_cmd ret 0
1.076024 olympus_xml_transfer (2): file content: <?xml version="1.0"?>
<x3c xmlns="http://www1.olympus-imaging.com/ww/x3c">
<output>
<result>2001</result>
<c9581>
<data>4F4C594D505553204449474954414C2043414D45524100</data>
</c9581>
</output>
</x3c>
1.076062 is_outer_operation (2): is_outer_operation 9581
1.076145 ums_wrap2_getresp (2): ums_wrap2_getresp
1.076461 traverse_output_tree (2): ptp result is 0x2001
1.076504 traverse_output_tree (2): cmd is 0x9581
1.076565 parse_9581_tree (2): 9581: OLYMPUS DIGITAL CAMERA
1.076599 camera_init (2): olympus setcameracontrolmode
1.076631 ums_wrap2_sendreq (2): ums_wrap2_sendreq
1.076662 is_outer_operation (2): is_outer_operation 910b
1.076693 is_outer_operation (2): is_outer_operation 910b
1.076722 ums_wrap2_getresp (2): ums_wrap2_getresp
1.076803 generate_xml (2): generated xml is:
1.076840 generate_xml (2): <?xml version="1.0"?>
<x3c xmlns="http://www1.olympus-imaging.com/ww/x3c"><input><c910B><param>00000001</param></c910B></input></x3c>
1.076871 olympus_xml_transfer (2): olympus_xml_transfer
1.076901 olympus_xml_transfer (2): ... checking camera for events ...
1.076934 gp_port_get_timeout (2): Current port timeout is 20000 milliseconds.
1.076965 gp_port_set_timeout (2): Setting port timeout to 150 milliseconds.
1.076998 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
1.227240 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
1.377518 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds.
1.377580 olympus_xml_transfer (2): ... sending XML request to camera ...
1.377631 ums_wrap_sendreq (2): ums_wrap_sendreq
1.377665 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.377902 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 55 42 42 42-10 00 00 00 00 00 0c c0 USBCUBBB........
0010 00 00 00 00 00 00 00 00-10 00 00 00 00 00 00 ...............
1.377941 gp_port_write (3): Writing 16 = 0x10 bytes to port...
1.378131 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 0c 10-04 00 00 00 01 00 00 80 ................
1.378169 usb_wrap_OK (2): usb_wrap_OK
1.378201 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.394726 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 55 42 42 42-00 00 00 00 00 USBSUBBB.....
1.394773 ums_wrap_sendreq (2): send_scsi_cmd ret 0
1.394803 ums_wrap_senddata (2): ums_wrap_senddata
1.394839 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.395040 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 56 42 42 42-5e 00 00 00 00 00 0c c1 USBCVBBB^.......
0010 00 00 00 00 00 00 00 00-5e 00 00 00 00 00 00 ........^......
1.395077 gp_port_write (3): Writing 94 = 0x5e bytes to port...
1.396523 gp_port_write (3): Wrote 94 = 0x5e bytes to port: (hexdump of 94 bytes)
0000 5e 00 00 00 02 00 0c 10-04 00 00 00 01 00 00 80 ^...............
0010 02 30 00 00 86 00 00 00-00 00 00 00 00 00 00 00 .0..............
0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0040 0d 48 00 52 00 45 00 51-00 55 00 45 00 53 00 54 .H.R.E.Q.U.E.S.T
0050 00 2e 00 58 00 33 00 43-00 00 00 00 00 00 ...X.3.C......
1.396561 usb_wrap_OK (2): usb_wrap_OK
1.396593 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.409414 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 56 42 42 42-00 00 00 00 00 USBSVBBB.....
1.409452 ums_wrap_senddata (2): send_scsi_cmd ret 0
1.409482 ums_wrap_getresp (2): ums_wrap_getresp
1.409513 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.409723 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 57 42 42 42-40 00 00 00 80 00 0c c3 USBCWBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
1.409815 gp_port_read (3): Reading 64 = 0x40 bytes from port...
1.417963 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 18 00 00 00 03 00 01 20-04 00 00 00 01 00 00 80 ....... ........
0010 ff ff ff ff 05 00 00 00-5e 00 00 00 02 00 08 10 ........^.......
0020 02 00 00 00 ef be ad de-ef be ad de ef be ad de ................
0030 ef be ad de ef be ad de-ef be ad de ef be ad de ................
1.418011 usb_wrap_OK (2): usb_wrap_OK
1.418043 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.418622 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 57 42 42 42-00 00 00 00 00 USBSWBBB.....
1.418657 ums_wrap_getresp (2): send_scsi_cmd ret 0
1.418694 ums_wrap_sendreq (2): ums_wrap_sendreq
1.418726 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.418925 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 58 42 42 42-0c 00 00 00 00 00 0c c0 USBCXBBB........
0010 00 00 00 00 00 00 00 00-0c 00 00 00 00 00 00 ...............
1.418962 gp_port_write (3): Writing 12 = 0xc bytes to port...
1.419145 gp_port_write (3): Wrote 12 = 0xc bytes to port: (hexdump of 12 bytes)
0000 0c 00 00 00 01 00 0d 10-05 00 00 00 ............
1.419181 usb_wrap_OK (2): usb_wrap_OK
1.419212 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.433542 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 58 42 42 42-00 00 00 00 00 USBSXBBB.....
1.433589 ums_wrap_sendreq (2): send_scsi_cmd ret 0
1.433619 ums_wrap_senddata (2): ums_wrap_senddata
1.433654 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.433853 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 59 42 42 42-92 00 00 00 00 00 0c c1 USBCYBBB........
0010 00 00 00 00 00 00 00 00-92 00 00 00 00 00 00 ...............
1.433890 gp_port_write (3): Writing 146 = 0x92 bytes to port...
1.436798 gp_port_write (3): Wrote 146 = 0x92 bytes to port: (hexdump of 146 bytes)
0000 92 00 00 00 02 00 0d 10-05 00 00 00 3c 3f 78 6d ............<?xm
0010 6c 20 76 65 72 73 69 6f-6e 3d 22 31 2e 30 22 3f l version="1.0"?
0020 3e 0a 3c 78 33 63 20 78-6d 6c 6e 73 3d 22 68 74 >.<x3c xmlns="ht
0030 74 70 3a 2f 2f 77 77 77-31 2e 6f 6c 79 6d 70 75 tp://www1.olympu
0040 73 2d 69 6d 61 67 69 6e-67 2e 63 6f 6d 2f 77 77 s-imaging.com/ww
0050 2f 78 33 63 22 3e 3c 69-6e 70 75 74 3e 3c 63 39 /x3c"><input><c9
0060 31 30 42 3e 3c 70 61 72-61 6d 3e 30 30 30 30 30 10B><param>00000
0070 30 30 31 3c 2f 70 61 72-61 6d 3e 3c 2f 63 39 31 001</param></c91
0080 30 42 3e 3c 2f 69 6e 70-75 74 3e 3c 2f 78 33 63 0B></input></x3c
0090 3e 0a - >.
1.436837 usb_wrap_OK (2): usb_wrap_OK
1.436868 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.448000 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 59 42 42 42-00 00 00 00 00 USBSYBBB.....
1.448036 ums_wrap_senddata (2): send_scsi_cmd ret 0
1.448066 ums_wrap_getresp (2): ums_wrap_getresp
1.448097 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.448296 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 5a 42 42 42-40 00 00 00 80 00 0c c3 USBCZBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
1.448333 gp_port_read (3): Reading 64 = 0x40 bytes from port...
1.451427 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 0c 00 00 00 03 00 01 20-05 00 00 00 d0 0f 16 b0 ....... ........
0010 e8 3a 01 b0 0c 00 00 00-ff ff ff ff 3c 3b 01 b0 .:..........<;..
0020 28 3b 01 b0 50 19 14 40-f8 3b 01 b0 10 00 00 00 (;..P..@.;......
0030 b0 3b 01 b0 80 59 08 b0-01 0f 00 00 00 ba 15 40 .;...Y.........@
1.451532 usb_wrap_OK (2): usb_wrap_OK
1.451565 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.452282 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 5a 42 42 42-00 00 00 00 00 USBSZBBB.....
1.452318 ums_wrap_getresp (2): send_scsi_cmd ret 0
1.452348 olympus_xml_transfer (2): ... waiting for camera ...
1.452381 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
1.551106 _cb_irq (2): 0x15f71f8 with status 0
1.551163 _cb_irq (3): interrupt (hexdump of 24 bytes)
0000 18 00 00 00 04 00 09 40-ff ff ff ff 03 00 00 00 .......@........
0010 00 00 00 00 00 00 00 00- ........
1.551195 _cb_irq (2): Requeuing completed transfer 0x15f71f8
1.551273 gp_port_check_int (3): Read 24 = 0x18 bytes from interrupt endpoint: (hexdump of 24 bytes)
0000 18 00 00 00 04 00 09 40-ff ff ff ff 03 00 00 00 .......@........
0010 00 00 00 00 00 00 00 00- ........
1.551311 olympus_xml_transfer (2): event: code 4009, p 00000003
1.551344 ums_wrap_sendreq (2): ums_wrap_sendreq
1.551376 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.551578 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 5b 42 42 42-10 00 00 00 00 00 0c c0 USBC[BBB........
0010 00 00 00 00 00 00 00 00-10 00 00 00 00 00 00 ...............
1.551615 gp_port_write (3): Writing 16 = 0x10 bytes to port...
1.551802 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 08 10-06 00 00 00 03 00 00 00 ................
1.551838 usb_wrap_OK (2): usb_wrap_OK
1.551870 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.591251 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 5b 42 42 42-00 00 00 00 00 USBS[BBB.....
1.591297 ums_wrap_sendreq (2): send_scsi_cmd ret 0
1.591327 ums_wrap_getdata (2): ums_wrap_getdata
1.591358 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.591557 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 5c 42 42 42-40 00 00 00 80 00 0c c4 USBC\BBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
1.591595 gp_port_read (3): Reading 64 = 0x40 bytes from port...
1.605090 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 10 00 00 00 02 00 01 20-06 00 00 00 5e 00 00 00 ....... ....^...
0010 5a 6a 5a 5a 5a 5a 5a 5a-52 5a 5a 5e 5b 5a 5a 5a ZjZZZZZZRZZ^[ZZZ
0020 5a fa 5a 5a 5a 5a 5a 5a-da 5a 5a 5a 5a 5b 5a 7a Z.ZZZZZZ.ZZZZ[Zz
0030 da 5a 5e 5a 5a 5a 5a 5a-5a 5a 5a 5a 5a 5a 5a 5b .Z^ZZZZZZZZZZZZ[
1.605138 usb_wrap_OK (2): usb_wrap_OK
1.605170 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.619027 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 5c 42 42 42-00 00 00 00 00 USBS\BBB.....
1.619075 ums_wrap_getdata (2): send_scsi_cmd ret 0
1.619107 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.619306 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 5d 42 42 42-5e 00 00 00 80 00 0c c2 USBC]BBB^.......
0010 00 00 00 00 00 00 00 00-5e 00 00 00 00 00 00 ........^......
1.619386 gp_port_read (3): Reading 94 = 0x5e bytes from port...
1.635910 gp_port_read (3): Read 94 = 0x5e bytes from port: (hexdump of 94 bytes)
0000 5e 00 00 00 02 00 08 10-06 00 00 00 01 00 00 80 ^...............
0010 02 30 00 00 84 00 00 00-00 00 00 00 00 00 00 00 .0..............
0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0040 0d 44 00 52 00 53 00 50-00 4f 00 4e 00 53 00 45 .D.R.S.P.O.N.S.E
0050 00 2e 00 58 00 33 00 43-00 00 00 00 00 00 ...X.3.C......
1.635959 usb_wrap_OK (2): usb_wrap_OK
1.635990 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.636617 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 5d 42 42 42-00 00 00 00 00 USBS]BBB.....
1.636654 ums_wrap_getdata (2): send_scsi_cmd 2 ret 0
1.636702 ums_wrap_getdata (3): ptp2/olympus/getdata (hexdump of 82 bytes)
0000 01 00 00 80 02 30 00 00-84 00 00 00 00 00 00 00 .....0..........
0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0030 00 00 00 00 0d 44 00 52-00 53 00 50 00 4f 00 4e .....D.R.S.P.O.N
0040 00 53 00 45 00 2e 00 58-00 33 00 43 00 00 00 00 .S.E...X.3.C....
0050 00 00 - ..
1.636738 ums_wrap_getresp (2): ums_wrap_getresp
1.636769 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.636969 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 5e 42 42 42-40 00 00 00 80 00 0c c3 USBC^BBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
1.637006 gp_port_read (3): Reading 64 = 0x40 bytes from port...
1.640075 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 0c 00 00 00 03 00 01 20-06 00 00 00 0c 00 00 00 ....... ........
0010 ff ff ff ff 90 c2 01 21-ee 0c 00 00 00 00 01 21 .......!.......!
0020 00 00 00 00 18 3b 01 b0-18 3b 01 b0 30 3b 01 b0 .....;...;..0;..
0030 01 20 00 00 57 21 14 40-52 00 00 00 52 5c 08 b0 . [email protected]\..
1.640112 usb_wrap_OK (2): usb_wrap_OK
1.640143 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.640756 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 5e 42 42 42-00 00 00 00 00 USBS^BBB.....
1.640792 ums_wrap_getresp (2): send_scsi_cmd ret 0
1.640831 olympus_xml_transfer (2): regular xml transfer: got new file: DRSPONSE.X3C
1.640867 ums_wrap_sendreq (2): ums_wrap_sendreq
1.640899 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.641076 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 5f 42 42 42-10 00 00 00 00 00 0c c0 USBC_BBB........
0010 00 00 00 00 00 00 00 00-10 00 00 00 00 00 00 ...............
1.641113 gp_port_write (3): Writing 16 = 0x10 bytes to port...
1.641303 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 09 10-07 00 00 00 03 00 00 00 ................
1.641339 usb_wrap_OK (2): usb_wrap_OK
1.641370 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.669458 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 5f 42 42 42-00 00 00 00 00 USBS_BBB.....
1.669505 ums_wrap_sendreq (2): send_scsi_cmd ret 0
1.669534 ums_wrap_getdata (2): ums_wrap_getdata
1.669565 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.669763 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 60 42 42 42-40 00 00 00 80 00 0c c4 USBC`BBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
1.669842 gp_port_read (3): Reading 64 = 0x40 bytes from port...
1.672977 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 10 00 00 00 02 00 01 20-07 00 00 00 90 00 00 00 ....... ........
0010 5a 6a 5a 5a 5a 5a 5a 5a-52 5a 5a 5e 5b 5a 5a 5a ZjZZZZZZRZZ^[ZZZ
0020 5a fa 5a 5a 5a 5a 5a 5a-da 5a 5a 5a 5a 5b 5a 7a Z.ZZZZZZ.ZZZZ[Zz
0030 da 5a 5e 5a 5a 5a 5a 5a-5a 5a 5a 5a 5a 5a 5a 5b .Z^ZZZZZZZZZZZZ[
1.673014 usb_wrap_OK (2): usb_wrap_OK
1.673045 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.673719 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 60 42 42 42-00 00 00 00 00 USBS`BBB.....
1.673755 ums_wrap_getdata (2): send_scsi_cmd ret 0
1.673787 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.674041 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 61 42 42 42-90 00 00 00 80 00 0c c2 USBCaBBB........
0010 00 00 00 00 00 00 00 00-90 00 00 00 00 00 00 ...............
1.674079 gp_port_read (3): Reading 144 = 0x90 bytes from port...
1.688222 gp_port_read (3): Read 144 = 0x90 bytes from port: (hexdump of 144 bytes)
0000 90 00 00 00 02 00 09 10-07 00 00 00 3c 3f 78 6d ............<?xm
0010 6c 20 76 65 72 73 69 6f-6e 3d 22 31 2e 30 22 3f l version="1.0"?
0020 3e 0a 3c 78 33 63 20 78-6d 6c 6e 73 3d 22 68 74 >.<x3c xmlns="ht
0030 74 70 3a 2f 2f 77 77 77-31 2e 6f 6c 79 6d 70 75 tp://www1.olympu
0040 73 2d 69 6d 61 67 69 6e-67 2e 63 6f 6d 2f 77 77 s-imaging.com/ww
0050 2f 78 33 63 22 3e 0a 3c-6f 75 74 70 75 74 3e 0a /x3c">.<output>.
0060 3c 72 65 73 75 6c 74 3e-32 30 30 31 3c 2f 72 65 <result>2001</re
0070 73 75 6c 74 3e 0a 3c 63-39 31 30 42 2f 3e 0a 3c sult>.<c910B/>.<
0080 2f 6f 75 74 70 75 74 3e-0a 3c 2f 78 33 63 3e 0a /output>.</x3c>.
1.688270 usb_wrap_OK (2): usb_wrap_OK
1.688301 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.690053 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 61 42 42 42-00 00 00 00 00 USBSaBBB.....
1.690090 ums_wrap_getdata (2): send_scsi_cmd 2 ret 0
1.690147 ums_wrap_getdata (3): ptp2/olympus/getdata (hexdump of 132 bytes)
0000 3c 3f 78 6d 6c 20 76 65-72 73 69 6f 6e 3d 22 31 <?xml version="1
0010 2e 30 22 3f 3e 0a 3c 78-33 63 20 78 6d 6c 6e 73 .0"?>.<x3c xmlns
0020 3d 22 68 74 74 70 3a 2f-2f 77 77 77 31 2e 6f 6c ="http://www1.ol
0030 79 6d 70 75 73 2d 69 6d-61 67 69 6e 67 2e 63 6f ympus-imaging.co
0040 6d 2f 77 77 2f 78 33 63-22 3e 0a 3c 6f 75 74 70 m/ww/x3c">.<outp
0050 75 74 3e 0a 3c 72 65 73-75 6c 74 3e 32 30 30 31 ut>.<result>2001
0060 3c 2f 72 65 73 75 6c 74-3e 0a 3c 63 39 31 30 42 </result>.<c910B
0070 2f 3e 0a 3c 2f 6f 75 74-70 75 74 3e 0a 3c 2f 78 />.</output>.</x
0080 33 63 3e 0a - 3c>.
1.690184 ums_wrap_getresp (2): ums_wrap_getresp
1.690215 gp_port_write (3): Writing 31 = 0x1f bytes to port...
1.690422 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 62 42 42 42-40 00 00 00 80 00 0c c3 USBCbBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
1.690459 gp_port_read (3): Reading 64 = 0x40 bytes from port...
1.693461 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 0c 00 00 00 03 00 01 20-07 00 00 00 e0 0f 16 b0 ....... ........
0010 e8 3a 01 b0 0c 00 00 00-ff ff ff ff 3c 3b 01 b0 .:..........<;..
0020 20 3b 01 b0 50 19 14 40-e0 0f 16 b0 80 58 08 b0 ;[email protected]..
0030 b0 3b 01 b0 e0 3b 01 b0-01 0f 00 00 00 ba 15 40 .;...;.........@
1.693506 usb_wrap_OK (2): usb_wrap_OK
1.693537 gp_port_read (3): Reading 13 = 0xd bytes from port...
1.694121 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 62 42 42 42-00 00 00 00 00 USBSbBBB.....
1.694158 ums_wrap_getresp (2): send_scsi_cmd ret 0
1.694195 olympus_xml_transfer (2): file content: <?xml version="1.0"?>
<x3c xmlns="http://www1.olympus-imaging.com/ww/x3c">
<output>
<result>2001</result>
<c910B/>
</output>
</x3c>
1.694377 traverse_output_tree (2): ptp result is 0x2001
1.694420 traverse_output_tree (2): cmd is 0x910b
1.694453 ptp (2): node c910B
1.694486 ptp (2): elements 0
1.694517 ptp (2): content
1.694550 camera_init (2): olympus opensession
1.694581 ums_wrap2_sendreq (2): ums_wrap2_sendreq
1.694612 is_outer_operation (2): is_outer_operation 9302
1.694643 is_outer_operation (2): is_outer_operation 9302
1.694673 ums_wrap2_getdata (2): ums_wrap2_getdata
1.694742 generate_xml (2): generated xml is:
1.694777 generate_xml (2): <?xml version="1.0"?>
<x3c xmlns="http://www1.olympus-imaging.com/ww/x3c"><input><c9302/></input></x3c>
1.694810 olympus_xml_transfer (2): olympus_xml_transfer
1.694840 olympus_xml_transfer (2): ... checking camera for events ...
1.694872 gp_port_get_timeout (2): Current port timeout is 20000 milliseconds.
1.694903 gp_port_set_timeout (2): Setting port timeout to 150 milliseconds.
1.694936 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
1.743139 _cb_irq (2): 0x15ff438 with status 0
1.743204 _cb_irq (3): interrupt (hexdump of 24 bytes)
0000 18 00 00 00 04 00 09 40-ff ff ff ff 02 00 00 00 .......@........
0010 00 00 00 00 00 00 00 00- ........
1.743238 _cb_irq (2): Requeuing completed transfer 0x15ff438
1.743320 gp_port_check_int (3): Read 24 = 0x18 bytes from interrupt endpoint: (hexdump of 24 bytes)
0000 18 00 00 00 04 00 09 40-ff ff ff ff 02 00 00 00 .......@........
0010 00 00 00 00 00 00 00 00- ........
1.743356 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds.
1.743389 olympus_xml_transfer (2): event: code 4009, p 00000002
1.743423 olympus_xml_transfer (2): event 0x4009, handle 0x00000002 received, no XML event, just passing on
1.743454 olympus_xml_transfer (2): ... checking camera for events ...
1.743485 gp_port_get_timeout (2): Current port timeout is 20000 milliseconds.
1.743515 gp_port_set_timeout (2): Setting port timeout to 150 milliseconds.
1.743547 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
1.893784 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
2.044043 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds.
2.044091 olympus_xml_transfer (2): ... sending XML request to camera ...
2.044138 ums_wrap_sendreq (2): ums_wrap_sendreq
2.044172 gp_port_write (3): Writing 31 = 0x1f bytes to port...
2.044389 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 63 42 42 42-10 00 00 00 00 00 0c c0 USBCcBBB........
0010 00 00 00 00 00 00 00 00-10 00 00 00 00 00 00 ...............
2.044426 gp_port_write (3): Writing 16 = 0x10 bytes to port...
2.044614 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 0c 10-08 00 00 00 01 00 00 80 ................
2.044651 usb_wrap_OK (2): usb_wrap_OK
2.044683 gp_port_read (3): Reading 13 = 0xd bytes from port...
2.056606 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 63 42 42 42-00 00 00 00 00 USBScBBB.....
2.056655 ums_wrap_sendreq (2): send_scsi_cmd ret 0
2.056738 ums_wrap_senddata (2): ums_wrap_senddata
2.056775 gp_port_write (3): Writing 31 = 0x1f bytes to port...
2.056979 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 64 42 42 42-5e 00 00 00 00 00 0c c1 USBCdBBB^.......
0010 00 00 00 00 00 00 00 00-5e 00 00 00 00 00 00 ........^......
2.057016 gp_port_write (3): Writing 94 = 0x5e bytes to port...
2.058410 gp_port_write (3): Wrote 94 = 0x5e bytes to port: (hexdump of 94 bytes)
0000 5e 00 00 00 02 00 0c 10-08 00 00 00 01 00 00 80 ^...............
0010 02 30 00 00 68 00 00 00-00 00 00 00 00 00 00 00 .0..h...........
0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
0040 0d 48 00 52 00 45 00 51-00 55 00 45 00 53 00 54 .H.R.E.Q.U.E.S.T
0050 00 2e 00 58 00 33 00 43-00 00 00 00 00 00 ...X.3.C......
2.058447 usb_wrap_OK (2): usb_wrap_OK
2.058479 gp_port_read (3): Reading 13 = 0xd bytes from port...
2.070434 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 64 42 42 42-00 00 00 00 00 USBSdBBB.....
2.070480 ums_wrap_senddata (2): send_scsi_cmd ret 0
2.070510 ums_wrap_getresp (2): ums_wrap_getresp
2.070541 gp_port_write (3): Writing 31 = 0x1f bytes to port...
2.070742 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 65 42 42 42-40 00 00 00 80 00 0c c3 USBCeBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
2.070780 gp_port_read (3): Reading 64 = 0x40 bytes from port...
2.073924 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 18 00 00 00 03 00 01 20-08 00 00 00 01 00 00 80 ....... ........
0010 ff ff ff ff 05 00 00 00-5e 00 00 00 02 00 08 10 ........^.......
0020 06 00 00 00 ef be ad de-ef be ad de ef be ad de ................
0030 ef be ad de ef be ad de-ef be ad de ef be ad de ................
2.073971 usb_wrap_OK (2): usb_wrap_OK
2.074003 gp_port_read (3): Reading 13 = 0xd bytes from port...
2.074593 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 65 42 42 42-00 00 00 00 00 USBSeBBB.....
2.074629 ums_wrap_getresp (2): send_scsi_cmd ret 0
2.074666 ums_wrap_sendreq (2): ums_wrap_sendreq
2.074698 gp_port_write (3): Writing 31 = 0x1f bytes to port...
2.074897 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 66 42 42 42-0c 00 00 00 00 00 0c c0 USBCfBBB........
0010 00 00 00 00 00 00 00 00-0c 00 00 00 00 00 00 ...............
2.074934 gp_port_write (3): Writing 12 = 0xc bytes to port...
2.075117 gp_port_write (3): Wrote 12 = 0xc bytes to port: (hexdump of 12 bytes)
0000 0c 00 00 00 01 00 0d 10-09 00 00 00 ............
2.075153 usb_wrap_OK (2): usb_wrap_OK
2.075184 gp_port_read (3): Reading 13 = 0xd bytes from port...
2.089453 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 66 42 42 42-00 00 00 00 00 USBSfBBB.....
2.089500 ums_wrap_sendreq (2): send_scsi_cmd ret 0
2.089529 ums_wrap_senddata (2): ums_wrap_senddata
2.089565 gp_port_write (3): Writing 31 = 0x1f bytes to port...
2.089763 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 67 42 42 42-74 00 00 00 00 00 0c c1 USBCgBBBt.......
0010 00 00 00 00 00 00 00 00-74 00 00 00 00 00 00 ........t......
2.089800 gp_port_write (3): Writing 116 = 0x74 bytes to port...
2.091286 gp_port_write (3): Wrote 116 = 0x74 bytes to port: (hexdump of 116 bytes)
0000 74 00 00 00 02 00 0d 10-09 00 00 00 3c 3f 78 6d t...........<?xm
0010 6c 20 76 65 72 73 69 6f-6e 3d 22 31 2e 30 22 3f l version="1.0"?
0020 3e 0a 3c 78 33 63 20 78-6d 6c 6e 73 3d 22 68 74 >.<x3c xmlns="ht
0030 74 70 3a 2f 2f 77 77 77-31 2e 6f 6c 79 6d 70 75 tp://www1.olympu
0040 73 2d 69 6d 61 67 69 6e-67 2e 63 6f 6d 2f 77 77 s-imaging.com/ww
0050 2f 78 33 63 22 3e 3c 69-6e 70 75 74 3e 3c 63 39 /x3c"><input><c9
0060 33 30 32 2f 3e 3c 2f 69-6e 70 75 74 3e 3c 2f 78 302/></input></x
0070 33 63 3e 0a - 3c>.
2.091376 usb_wrap_OK (2): usb_wrap_OK
2.091408 gp_port_read (3): Reading 13 = 0xd bytes from port...
2.104312 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 67 42 42 42-00 00 00 00 00 USBSgBBB.....
2.104359 ums_wrap_senddata (2): send_scsi_cmd ret 0
2.104388 ums_wrap_getresp (2): ums_wrap_getresp
2.104419 gp_port_write (3): Writing 31 = 0x1f bytes to port...
2.104619 gp_port_write (3): Wrote 31 = 0x1f bytes to port: (hexdump of 31 bytes)
0000 55 53 42 43 68 42 42 42-40 00 00 00 80 00 0c c3 USBChBBB@.......
0010 00 00 00 00 00 00 00 00-40 00 00 00 00 00 00 ........@......
2.104655 gp_port_read (3): Reading 64 = 0x40 bytes from port...
2.107568 gp_port_read (3): Read 64 = 0x40 bytes from port: (hexdump of 64 bytes)
0000 0c 00 00 00 03 00 01 20-09 00 00 00 84 44 01 70 ....... .....D.p
0010 e8 3a 01 b0 0c 00 00 00-ff ff ff ff 3c 3b 01 b0 .:..........<;..
0020 28 3b 01 b0 50 19 14 40-f8 3b 01 b0 10 00 00 00 (;..P..@.;......
0030 b0 3b 01 b0 80 57 08 b0-01 0f 00 00 00 ba 15 40 .;...W.........@
2.107603 usb_wrap_OK (2): usb_wrap_OK
2.107634 gp_port_read (3): Reading 13 = 0xd bytes from port...
2.108229 gp_port_read (3): Read 13 = 0xd bytes from port: (hexdump of 13 bytes)
0000 55 53 42 53 68 42 42 42-00 00 00 00 00 USBShBBB.....
2.108265 ums_wrap_getresp (2): send_scsi_cmd ret 0
2.108295 olympus_xml_transfer (2): ... waiting for camera ...
2.108328 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
22.121071 gp_port_check_int (3): Reading 24 = 0x18 bytes from interrupt endpoint...
42.141270 ptp_usb_event [usb.c:587] (0): Reading PTP event failed: Zeitüberschreitung beim Lesen oder Schreiben des Ports (-10)
42.141659 camera_init [library.c:8374](0): 'ptp_olympus_opensession (params, &data, &len)' failed: 'PTP Timeout' (0x02fa)
42.141724 gp_context_error (0): PTP Timeout
42.141869 gp_port_close (2): Closing port...
42.143026 _close_async_interrupts (2): canceling transfer 0:0x15ea528 (status 0)
42.143411 _close_async_interrupts (2): canceling transfer 1:0x15f71f8 (status 0)
42.143745 _close_async_interrupts (2): canceling transfer 2:0x15ff438 (status 0)
42.144096 _close_async_interrupts (2): canceling transfer 3:0x15ff000 (status 0)
42.144449 _close_async_interrupts (2): canceling transfer 4:0x15d9860 (status 0)
42.144720 _close_async_interrupts (2): canceling transfer 5:0x15ea308 (status 0)
42.145080 _close_async_interrupts (2): canceling transfer 6:0x15ea768 (status 0)
42.145380 _close_async_interrupts (2): canceling transfer 7:0x16001c0 (status 0)
42.145662 _close_async_interrupts (2): canceling transfer 8:0x15fdbb0 (status 0)
42.145975 _close_async_interrupts (2): canceling transfer 9:0x15fbcb0 (status 0)
42.146298 _cb_irq (2): 0x15ea528 with status 3
42.146344 _cb_irq (2): Transfer 0x15ea528 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.146396 _cb_irq (2): 0x15f71f8 with status 3
42.146435 _cb_irq (2): Transfer 0x15f71f8 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.146484 _cb_irq (2): 0x15ff438 with status 3
42.146577 _cb_irq (2): Transfer 0x15ff438 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.146623 _cb_irq (2): 0x15ff000 with status 3
42.146656 _cb_irq (2): Transfer 0x15ff000 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.146698 _cb_irq (2): 0x15d9860 with status 3
42.146730 _cb_irq (2): Transfer 0x15d9860 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.146772 _cb_irq (2): 0x15ea308 with status 3
42.146803 _cb_irq (2): Transfer 0x15ea308 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.146845 _cb_irq (2): 0x15ea768 with status 3
42.146877 _cb_irq (2): Transfer 0x15ea768 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.146919 _cb_irq (2): 0x16001c0 with status 3
42.146951 _cb_irq (2): Transfer 0x16001c0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.146994 _cb_irq (2): 0x15fdbb0 with status 3
42.147025 _cb_irq (2): Transfer 0x15fdbb0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.147067 _cb_irq (2): 0x15fbcb0 with status 3
42.147099 _cb_irq (2): Transfer 0x15fbcb0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
42.153823 gp_context_error (0): An error occurred in the io-library ('Zeitüberschreitung beim Lesen oder Schreiben des Ports'): Keine Fehlerbeschreibung verfügbar.
42.156089 gp_camera_free (2): Freeing camera...
42.156153 gp_port_free (2): Freeing port...
42.156188 gp_port_close (2): Closing port...
42.157346 gp_filesystem_reset (2): resetting filesystem
42.157417 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
42.157464 gp_filesystem_lru_clear (2): fscache LRU list already empty
42.157500 delete_all_folders (2): Internally deleting all folders from '/'...
42.157535 lookup_folder (2): Lookup folder '/'...
42.157582 lookup_folder (2): Found! / is 0x15d6d40
42.157616 recurse_delete_folder (2): Recurse delete folder 0x15d6d40//