Re: Blocking EOS 1200d (manual focus ?)

On Thu, Feb 16, 2017 at 06:48:03AM -0700, roberto56 wrote:
> Hello,
> I use a 1200D for capture with a Raspberry Pi , manual focus switched on the
> lens, both with USB (for downloading pictures) and with remote cable release
> (cable+optocouplers for triggering the camera) , timelapse every 20 minutes,
> no pictures in the night . Gphoto2 version is 2.5.10.
> Sometimes, the 1200D is blocking , no way to capture a picture , no reaction
> from the camera. This happens every morning and most of the time, the camera
> unblock after one or two hours . But sometimes , It happens also in the day
> (but only one or two pictures lost).
> This problem happens with a 1200D but with a 1100D , it was ok.
> When the triggering by cable fail , trying to capture a picture with
> --capture-image-and-download also fail.
> The only way that I have found to unblock the camera is to switch power off
> manually and switch it back on manually. 
> 
> I tried to use autofocusdrive=0 and cancelautofocus=1 , thinking the
> autofocus could be the problem.
> I have tried this :
> sudo gphoto2 --set-config autofocusdrive=0 --set-config cancelautofocus=1
> But when I verify cancelautofocus : sudo gphoto2 --get-config
> cancelautofocus
> Result is :
> Label: Cancel Canon DSLR Autofocus
> Type: TOGGLE
> Current: 0
> So I guess I don't use the good commands, or I don't made the good things
> ...
> How to set cancelautofocus ?
> 
> I don't know if my problem really comes from manual focus , could it be
> another thing ?
> 
> Your help would be welcome because I work on this problem since more than a
> week without finding any solution.
> Roberto.

No,

likely not. If you are using 2.5.10, please upgrade libgphoto2 to 2.5.12 as
it contains fixes for the EOS 1200D and see if that works better.

Ciao, Marcus

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot